From: Adam Johansson <adam.johansson@madsci.se>
To: Jonathan Vardy <jonathan@explainerdc.com>
Cc: linux-kernel@vger.kernel.org
Subject: RE: Promise TX4 100: neither IDE port enabled
Date: 05 Apr 2003 15:31:50 +0200 [thread overview]
Message-ID: <1049488524.1851.289.camel@dgc.madsci.se> (raw)
In-Reply-To: <73300040777B0F44B8CE29C87A0782E101FA98E9@exchange.explainerdc.com>
On Fri, 2003-04-04 at 17:07, Jonathan Vardy wrote:
> > Without knowing the cause or fix for it I instead run ac-patches.
> > The card(s) are than configured correctly.
> > I now run 2.4.21pre5ac3 and I remember 2.4.21pre4ac4 also worked fine.
>
> I tried 2.4.21-pre5-ac3 but still I get the same problems, with what
> settings did you compile the kernel?
>
> I used these:
>
> On: PROMISE PDC202{46|62|65|67} support
> On: Special UDMA Feature
> On: PROMISE PDC202{68|69|70|71|75|76|77} support
>
> Off: Special FastTrak Feature
> Off: Support for IDE Raid controllers (EXPERIMENTAL)
I do have Special FastTrak feature turned on as well.
I have also compiled support for IDE Raid + Promise RAID.
dmesg shows the drives at hde and hdg detected as UDMA(100).
ataraid/d0: ataraid/d0p1
Drive 0 is 43979 Mb (33 / 0)
Drive 1 is 43979 Mb (34 / 0)
Still I simply treat it as a Ultra-card and use /dev/hde and /dev/hdg in
a RAID1 config with 2 IBM 45Gb drives.
(though /dev/ataraid/d0p1 exists, something I wasn't aware I had choosen
to compile into the kernel )
"cat /proc/ide/pdc202xx" says both masters are running UDMA4 and that
the card is an Ultra100.
hdparm -tT /dev/md5 gives;
Timing buffer-cache reads: 128 Mb in 0.29 seconds =441.38 MB/sec
Timing buffered disk reads: 64 Mb in 1.77 seconds = 36.16 MB/sec
Good luck!
/Adam Johansson
> Yours sincerey, Jonathan Vardy
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
next prev parent reply other threads:[~2003-04-05 13:20 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-04-04 15:07 Jonathan Vardy
2003-04-04 23:58 ` Thomas Backlund
2003-04-05 13:31 ` Adam Johansson [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-04-04 10:56 Jonathan Vardy
2003-04-04 12:39 ` Adam Johansson
2003-04-05 0:03 ` Jonathan Vardy
2003-04-04 9:10 Jonathan Vardy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1049488524.1851.289.camel@dgc.madsci.se \
--to=adam.johansson@madsci.se \
--cc=jonathan@explainerdc.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®