From: Andy Pfiffer <andyp@osdl.org>
To: Eric Biederman <ebiederm@xmission.com>
Cc: fastboot@osdl.org,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Suparna Bhattacharya <suparna@in.ibm.com>
Subject: [KEXEC][2.5.69] kexec for 2.5.69 available
Date: 09 May 2003 12:04:18 -0700 [thread overview]
Message-ID: <1052507057.15923.31.camel@andyp.pdx.osdl.net> (raw)
Eric,
I have a patch set available for kexec for 2.5.69. I had an unrelated
delay in posting this due to some strange behavior of late with LILO and
my ext3-mounted /boot partition (/sbin/lilo would say that it updated,
but a subsequent reboot would not include my new kernel)
The patches are available for download from OSDL's patch lifecycle
manager ( http://www.osdl.org/cgi-bin/plm/ ).
Patch stack for kexec for 2.5.69:
kexec base for 2.5.69:
http://www.osdl.org/cgi-bin/plm?module=patch_info&patch_id=1828
kexec hwfixes for 2.5.69:
http://www.osdl.org/cgi-bin/plm?module=patch_info&patch_id=1829
kexec usemm change (allowed 2-way to work for me):
http://www.osdl.org/cgi-bin/plm?module=patch_info&patch_id=1830
optional change to defconfig (sets CONFIG_KEXEC=y):
http://www.osdl.org/cgi-bin/plm?module=patch_info&patch_id=1831
The patches are also available (with matching kexec-tools-1.8) from this
link pending a crontab update:
http://www.osdl.org/archive/andyp/kexec/2.5.69/
Andrew Morton's tree now also contains kexec, and you can pick up his
patch here:
http://www.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.69/
I'll put together another release area for a matching kexec-tools for
-mm trees (different kexec syscall number between 2.5.* and 2.5.*-mm*)
as soon as I get -mm trees built and booted on my kexec test machines.
Regards,
Andy
To All: if you try kexec, a quick reply of success or failure to
fastboot@osdl.org would be appreciated. If it doesn't work for you,
please include the output of lspci in your email.
Kexec has worked for me on these systems:
single P3-800MHz, 640MB:
00:00.0 Host bridge: ServerWorks CNB20LE Host Bridge (rev 06)
00:00.1 Host bridge: ServerWorks CNB20LE Host Bridge (rev 06)
00:01.0 VGA compatible controller: S3 Inc. Savage 4 (rev 04)
00:09.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro
100] (rev 08)
00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 50)
00:0f.1 IDE interface: ServerWorks OSB4 IDE Controller
00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB
Controller (rev 04)
01:03.0 SCSI storage controller: Adaptec AIC-7892P U160/m (rev
02)
dual P3-866MHz, 256MB:
00:00.0 Host bridge: ServerWorks CNB20LE Host Bridge (rev 05)
00:00.1 Host bridge: ServerWorks CNB20LE Host Bridge (rev 05)
00:02.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro
100] (rev 08)
00:04.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro
100] (rev 08)
00:07.0 VGA compatible controller: ATI Technologies Inc Rage XL
(rev 65)
00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 4f)
00:0f.1 IDE interface: ServerWorks OSB4 IDE Controller
00:0f.2 USB Controller: ServerWorks OSB4/CSB5 USB Controller
(rev 04)
01:05.0 SCSI storage controller: LSI Logic / Symbios Logic
53c896 (rev 07)
01:05.1 SCSI storage controller: LSI Logic / Symbios Logic
53c896 (rev 07)
dual P4-1.7GHz Xeon, 512MB:
00:00.0 Host bridge: Intel Corp. 82850 860 (Wombat) Chipset Host
Bridge (MCH) (rev 04)
00:01.0 PCI bridge: Intel Corp. 82850/82860 850/860
(Tehama/Wombat) Chipset AGP Bridge (rev 04)
00:02.0 PCI bridge: Intel Corp. 82860 860 (Wombat) Chipset PCI
Bridge (rev 04)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA PCI Bridge (rev 04)
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev
04)
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 04)
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub (rev
04)
00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 04)
00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM
AC'97 Audio (rev 04)
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA
G400 AGP (rev 85)
02:1f.0 PCI bridge: Intel Corp. 82806AA PCI64 Hub PCI Bridge
(rev 03)
03:00.0 PIC: Intel Corp. 82806AA PCI64 Hub Advanced Programmable
Interrupt Controller (rev 01)
04:04.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro
100] (rev 0c)
next reply other threads:[~2003-05-09 18:52 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-05-09 19:04 Andy Pfiffer [this message]
2003-05-09 20:04 ` ext3/lilo/2.5.6[89] (was: [KEXEC][2.5.69] kexec for 2.5.69 available) Christophe Saout
2003-05-09 20:55 ` Andy Pfiffer
2003-05-09 20:46 ` ext3/lilo/2.5.6[89] (was: [KEXEC][2.5.69] kexec for 2.5.69available) Riley Williams
2003-05-09 22:39 ` Joe Korty
2003-05-09 23:39 ` Andy Pfiffer
2003-06-11 22:08 ` ext[23]/lilo/2.5.{68,69,70} -- IDE Problem? Andy Pfiffer
2003-06-11 23:21 ` Christophe Saout
2003-06-11 23:40 ` Bartlomiej Zolnierkiewicz
2003-06-12 0:20 ` ext[23]/lilo/2.5.{68,69,70} -- blkdev_put() problem? Andy Pfiffer
2003-06-12 0:29 ` Andrew Morton
2003-06-12 10:42 ` Christophe Saout
2003-06-12 10:54 ` Andrew Morton
2003-06-12 11:12 ` Christophe Saout
2003-06-12 11:24 ` ext[23]/lilo/2.5.{68,69,70} -- strace lilo - freeze Christophe Saout
2003-06-12 12:44 ` ext[23]/lilo/2.5.{68,69,70} -- blkdev_put() problem? Herbert Xu
2003-06-12 17:27 ` Andy Pfiffer
2003-06-12 17:53 ` Andrew Morton
2003-06-12 18:03 ` Andy Pfiffer
2003-06-12 18:10 ` Andrew Morton
2003-06-12 18:53 ` Christophe Saout
2003-06-12 18:25 ` Andy Pfiffer
2003-06-13 8:01 ` Andrew Morton
2003-06-13 9:57 ` Herbert Xu
2003-06-13 14:42 ` Eduardo Pereira Habkost
2003-06-13 17:17 ` Andy Pfiffer
2003-06-13 22:12 ` Unai Garro Arrazola
2003-06-13 22:28 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1052507057.15923.31.camel@andyp.pdx.osdl.net \
--to=andyp@osdl.org \
--cc=ebiederm@xmission.com \
--cc=fastboot@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=suparna@in.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®