Linux version 2.5.69-mm6-test (root@glass.felipe-alfaro.com) (gcc version 3.2.3 20030422 (Red Hat Linux 3.2.3-4)) #11 Sat May 17 14:40:15 CEST 2003 Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data) BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 255MB LOWMEM available. On node 0 totalpages: 65520 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61424 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 Building zonelist for node : 0 Kernel command line: ro root=/dev/hda3 1 Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 697.151 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1376.25 BogoMIPS Memory: 257504k/262080k available (767k kernel code, 3848k reserved, 246k data, 96k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After generic, caps: 0383f9ff 00000000 00000000 00000040 CPU: Intel Pentium III (Coppermine) stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX Linux NoNET1.0 for Linux 2.6 PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=1 PCI: Using configuration type 1 BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) block request queues: 4/128 requests per read queue 4/128 requests per write queue enter congestion at 15 exit congestion at 17 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 PCI: IRQ 0 for device 00:0c.0 doesn't match PIRQ mask - try pci=usepirqmask PCI: Found IRQ 10 for device 00:0c.0 PCI: IRQ 0 for device 00:0c.1 doesn't match PIRQ mask - try pci=usepirqmask PCI: Found IRQ 5 for device 00:0c.1 PCI: Sharing IRQ 5 with 00:09.0 SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 Enabling SEP on CPU 0 Limiting direct PCI/PCI transfers. pty: 256 Unix98 ptys configured Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: HITACHI_DK23BA-20, ATA DISK drive anticipatory scheduling elevator ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: MATSHITADVD-ROM SR-8185, ATAPI CD/DVD-ROM drive anticipatory scheduling elevator ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: host protected area => 1 hda: 39070080 sectors (20004 MB) w/2048KiB Cache, CHS=38760/16/63 hda: hda1 hda2 hda3 hda4 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 Advanced Linux Sound Architecture Driver Version 0.9.2 (Thu Mar 20 13:31:57 2003 UTC). ALSA device list: No soundcards found. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 96k freed PCI: Found IRQ 5 for device 00:09.0 PCI: Sharing IRQ 5 with 00:0c.1 Unable to handle kernel paging request at virtual address b46c20d7 printing eip: c016b62f *pde = 00000000 Oops: 0000 [#1] CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00010246 EIP is at sysfs_create_link+0xcf/0x130 eax: cf643f60 ebx: ffffffff ecx: ffffffff edx: b46c20cf esi: c01c99bb edi: cff5e470 ebp: cf765ef0 esp: cf765ec4 ds: 007b es: 007b ss: 0068 Process modprobe (pid: 150, threadinfo=cf764000 task=cfc8f8c0) Stack: cff5e470 cf643f60 00000023 d0825d60 cfb73000 cf643f60 00000023 b46c20cf d0825d90 cff5e44c 00000000 cf765f08 c0195cc2 d0825d60 cff5e470 cff5e470 d0825d48 cf765f24 c0195d4a cff5e44c d0825d48 cff5e454 c01e25a0 d0825d48 Call Trace: [] driver+0x40/0xa0 [snd_ymfpci] [] driver+0x70/0xa0 [snd_ymfpci] [] device_bind_driver+0x42/0x50 [] driver+0x40/0xa0 [snd_ymfpci] [] driver+0x28/0xa0 [snd_ymfpci] [] bus_match+0x7a/0x80 [] driver+0x28/0xa0 [snd_ymfpci] [] driver+0x28/0xa0 [snd_ymfpci] [] driver_attach+0x5d/0x70 [] driver+0x28/0xa0 [snd_ymfpci] [] driver+0x28/0xa0 [snd_ymfpci] [] bus_add_driver+0xa6/0xc0 [] driver+0x28/0xa0 [snd_ymfpci] [] +0x0/0xa0 [snd_ymfpci] [] driver_register+0x31/0x40 [] driver+0x28/0xa0 [snd_ymfpci] [] pci_register_driver+0x45/0x60 [] driver+0x28/0xa0 [snd_ymfpci] [] alsa_card_ymfpci_init+0x18/0x60 [snd_ymfpci] [] driver+0x0/0xa0 [snd_ymfpci] [] sys_init_module+0x102/0x1b0 [] +0x0/0xa0 [snd_ymfpci] [] sysenter_past_esp+0x52/0x71 Code: ac aa 84 c0 75 fa 4b 83 c1 03 83 fb ff 75 ed 8b 45 ec 8b 55 e8 8b 7d 0c 89 44 24 08 89 54 24 04 89 3c 24 e8 d4 fe ff ff 8b 55 f0 <8b> 42 08 8d 48 6c ff 48 6c 78 68 8b 45 10 89 14 24 89 44 24 04