Am Die, 2003-06-03 um 10.17 schrieb Henrik Storner:

> My KT400 motherboard (Soltek) requires me to boot with the "noapic"
> parameter, or it will hang in a similar manner. Did you try that,
> or did you just enable/disable the APIC in the BIOS ?

My ECS L7VTA will boot with APIC enabled but has interrupt problems 
with at least the NIC and thus will stop booting (over network that is).
Alan told me yesterday in private that he thinks he knows the problem
and has a solution in his -ac series.

Haven't had a chance to try that though...

-- 
Servus,
       Daniel