Hi, I'm seeing the following OOPS when booting 2.5.71-mm1 on my Pentium IV box: swapper D current 1 0 2 (L-TLB) dff8ddac 00000000 dff8f900 00000189 dff8ddf8 c0118be0 dff8f900 c14fab28 c01e9ffc dfe25d80 ffffffff c01df416 c031dbdc dff8c000 c01df55a c031dbdc c1500768 dff8de2c dff8de2c dff8de00 c0119b56 c14fab28 c0135634 c14fab28 Call Trace: [] schedule+0x5c9/0x600 [] do_ide_request+0x1d/0x21 [] generic_unplug_device+0x77/0x79 [] blk_run_queues+0x79/0xae [] io_schedule+0xe/0x16 [] __lock_page_wq+0xae/0xdb [] autoremove_wake_function+0x0/0x4f [] autoremove_wake_function+0x0/0x4f [] add_to_page_cache_lru+0x4a/0x4c [] read_cache_page+0x146/0x218 [] blkdev_get_block+0x0/0x56 [] read_dev_sector+0x3e/0xd5 [] blkdev_readpage+0x0/0x15 [] msdos_partition+0x4d/0x28e [] check_partition+0xce/0x13a [] register_disk+0x100/0x191 [] add_disk+0x65/0x97 [] exact_match+0x0/0x8 [] exact_lock+0x0/0x1e [] idedisk_attach+0x11e/0x1b3 [] ata_attach+0xdb/0x1a2 [] ide_register_driver+0xfd/0x110 [] idedisk_init+0xf/0x14 [] do_initcalls+0x27/0x92 [] init_workqueues+0xf/0x29 [] init+0x32/0x1b6 [] init+0x0/0x1b6 [] kernel_thread_helper+0x5/0xb The OOPS seems to happen just when the kernel is checking the IDE partitions on the primary channel. Attached is the "dmesg" and the "config" used to compile the kernel.