Linux version 2.5.71-mm1 (root@glass.felipe-alfaro.com) (gcc version 3.3 20030610 (Red Hat Linux 3.3-6)) #1 Sun Jun 15 20:52:19 CEST 2003 Video mode to be used for restore is f01 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 ACPI: RSDP (v000 IntelR ) @ 0x000f7380 ACPI: RSDT (v001 IntelR AWRDACPI 16944.11825) @ 0x1fff3000 ACPI: FADT (v001 IntelR AWRDACPI 16944.11825) @ 0x1fff3040 ACPI: DSDT (v001 INTELR AWRDACPI 00000.04096) @ 0x00000000 ACPI: BIOS passes blacklist Building zonelist for node : 0 Kernel command line: root=/dev/hda2 vga=0x0f01 Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 2004.637 MHz processor. Console: colour VGA+ 80x50 Calibrating delay loop... 3997.69 BogoMIPS Memory: 516008k/524224k available (1398k kernel code, 7476k reserved, 597k data, 96k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After generic, caps: 3febf9ff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX Initializing RT netlink socket PCI: PCI BIOS revision 2.10 entry at 0xfb0b0, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030522 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Br ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 9 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' pty: 256 Unix98 ptys configured Machine check exception polling timer started. cpufreq: P4/Xeon(TM) CPU On-Demand Clock Modulation available Enabling SEP on CPU 0 Journalled Block Device driver loaded ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports C1, 2 throttling states) ACPI: Thermal Zone [THRM] (53 C) Real Time Clock Driver v1.11 Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds). Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 00:1f.1 ICH2: chipset revision 5 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA hda: ST380021A, ATA DISK drive hdb: IBM-DTLA-307030, ATA DISK drive anticipatory scheduling elevator ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: Pioneer DVD-ROM ATAPIModel DVD-500M 010, ATAPI CD/DVD-ROM drive hdd: SONY CD-RW CRX185E3, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: host protected area => 1 hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63, UDMA(100) hda:swapper D current 1 0 2 (L-TLB) dff8ddac 00000000 dff8f900 00000189 dff8ddf8 c0118be0 dff8f900 c14fab28 c01e9ffc dfe25d80 ffffffff c01df416 c031dbdc dff8c000 c01df55a c031dbdc c1500768 dff8de2c dff8de2c dff8de00 c0119b56 c14fab28 c0135634 c14fab28 Call Trace: [] schedule+0x5c9/0x600 [] do_ide_request+0x1d/0x21 [] generic_unplug_device+0x77/0x79 [] blk_run_queues+0x79/0xae [] io_schedule+0xe/0x16 [] __lock_page_wq+0xae/0xdb [] autoremove_wake_function+0x0/0x4f [] autoremove_wake_function+0x0/0x4f [] add_to_page_cache_lru+0x4a/0x4c [] read_cache_page+0x146/0x218 [] blkdev_get_block+0x0/0x56 [] read_dev_sector+0x3e/0xd5 [] blkdev_readpage+0x0/0x15 [] msdos_partition+0x4d/0x28e [] check_partition+0xce/0x13a [] register_disk+0x100/0x191 [] add_disk+0x65/0x97 [] exact_match+0x0/0x8 [] exact_lock+0x0/0x1e [] idedisk_attach+0x11e/0x1b3 [] ata_attach+0xdb/0x1a2 [] ide_register_driver+0xfd/0x110 [] idedisk_init+0xf/0x14 [] do_initcalls+0x27/0x92 [] init_workqueues+0xf/0x29 [] init+0x32/0x1b6 [] init+0x0/0x1b6 [] kernel_thread_helper+0x5/0xb hda1 hda2 hda3 hdb: max request size: 128KiB hdb: host protected area => 1 hdb: 60036480 sectors (30739 MB) w/1916KiB Cache, CHS=59560/16/63, UDMA(100) hdb: hdb1 hdb2 hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. ACPI: (supports S0 S3 S4bios S5) EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. (fs/jbd/recovery.c, 253): journal_recover: JBD: recovery, exit status 0, recovered transactions 519217 to 519426 (fs/jbd/recovery.c, 255): journal_recover: JBD: Replayed 1545 and revoked 89/202 blocks kjournald starting. Commit interval 5 seconds EXT3-fs: hda2: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 908262 ext3_orphan_cleanup: deleting unreferenced inode 518585 ext3_orphan_cleanup: deleting unreferenced inode 906788 EXT3-fs: hda2: 3 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 96k freed drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 PCI: Setting latency timer of device 00:1f.2 to 64 uhci-hcd 0000:00:1f.2: Intel Corp. 82801BA/BAM USB (Hub uhci-hcd 0000:00:1f.2: irq 11, io base 0000d000 Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated. uhci-hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 hub 1-0:0: USB hub found hub 1-0:0: 2 ports detected PCI: Setting latency timer of device 00:1f.4 to 64 uhci-hcd 0000:00:1f.4: Intel Corp. 82801BA/BAM USB (Hub uhci-hcd 0000:00:1f.4: irq 9, io base 0000d800 uhci-hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 hub 2-0:0: USB hub found hub 2-0:0: 2 ports detected drivers/usb/core/usb.c: registered new driver hiddev drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver EXT3 FS 2.4-0.9.16, 02 Dec 2001 on hda2, internal journal Adding 524280k swap on /swap. Priority:-1 extents:390 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 02:0d.0: 3Com PCI 3c905C Tornado at 0xc000. Vers LK1.1.19 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Module nfsd cannot be unloaded due to unsafe usage in include/linux/module.h:479 Module lockd cannot be unloaded due to unsafe usage in include/linux/module.h:479