Linux version 2.5.72-mm2 (root@glass.felipe-alfaro.com) (gcc version 3.3 20030610 (Red Hat Linux 3.3-6)) #1 Sat Jun 21 07:58:26 CEST 2003 Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data) BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 255MB LOWMEM available. On node 0 totalpages: 65520 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61424 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 ACPI: RSDP (v000 NEC ) @ 0x000fb550 ACPI: RSDT (v001 NEC ND000020 00000.00001) @ 0x0fff0000 ACPI: FADT (v001 NEC ND000020 00000.00001) @ 0x0fff0030 ACPI: BOOT (v001 NEC ND000020 00000.00001) @ 0x0fff00b0 ACPI: DSDT (v001 NEC ND000020 00000.00001) @ 0x00000000 ACPI: BIOS passes blacklist Building zonelist for node : 0 Kernel command line: ro root=/dev/hda3 Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 696.985 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1389.36 BogoMIPS Memory: 255972k/262080k available (1795k kernel code, 5384k reserved, 705k data, 108k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After generic, caps: 0383f9ff 00000000 00000000 00000040 CPU: Intel Pentium III (Coppermine) stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX Initializing RT netlink socket PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030619 swapper R current 1 0 2 (L-TLB) c12b9e84 00000000 c12bb900 0000001d c12b9ebc c01184ed c12bb900 00000000 002b9f50 00000000 c12b9f50 00000000 00000001 00000000 c12b9f44 c01241a6 00000000 00000001 00000001 00000000 c12b9f44 20000001 c01243f4 00000000 Call Trace: [] scheduler_tick+0x29d/0x310 [] update_process_times+0x46/0x60 [] do_timer+0x34/0xf0 [] timer_interrupt+0x2a/0x120 [] handle_IRQ_event+0x49/0x80 [] do_IRQ+0x91/0x130 [] common_interrupt+0x18/0x20 [] acpi_os_write_port+0x25/0x3c [] acpi_hw_set_mode+0x56/0x8a [] acpi_enable+0x22/0x4c [] acpi_enable_subsystem+0x29/0x47 [] acpi_bus_init+0x6d/0xf1 [] acpi_init+0x5d/0x9c [] do_initcalls+0x2b/0xa0 [] init_workqueues+0xf/0x30 [] init+0x2f/0x1c0 [] init+0x0/0x1c0 [] kernel_thread_helper+0x5/0xc ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [NRTH] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.NRTH._PRT] ACPI: Embedded Controller [EC0] (gpe 9) ACPI: Power Resource [PUSB] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 10, disabled) ACPI: PCI Interrupt Link [LNKB] (IRQs 5, disabled) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10, disabled) ACPI: PCI Interrupt Link [LNKD] (IRQs 9, disabled) Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' pty: 256 Unix98 ptys configured SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 Enabling SEP on CPU 0 Limiting direct PCI/PCI transfers. ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery absent) ACPI: Power Button (CM) [PRB1] ACPI: Lid Switch [LID0] ACPI: Fan [FANC] (on) ACPI: Processor [CPU0] (supports C1) ACPI: Thermal Zone [THRM] (64 C) Real Time Clock Driver v1.11 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 440BX Chipset. agpgart: Maximum main memory to use for agp memory: 203M agpgart: AGP aperture is 256M @ 0xe0000000 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: HITACHI_DK23BA-20, ATA DISK drive anticipatory scheduling elevator ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: MATSHITADVD-ROM SR-8185, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: host protected area => 1 hda: 39070080 sectors (20004 MB) w/2048KiB Cache, CHS=38760/16/63, UDMA(33) hda: hda1 hda2 hda3 hda4 hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 yenta 00:0c.0: Preassigned resource 3 busy, reconfiguring... Yenta IRQ list 08d8, PCI irq10 Socket status: 30000068 yenta 00:0c.1: Preassigned resource 2 busy, reconfiguring... yenta 00:0c.1: Preassigned resource 3 busy, reconfiguring... Yenta IRQ list 08d8, PCI irq5 Socket status: 30000006 drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 uhci-hcd 0000:00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 uhci-hcd 0000:00:07.2: irq 9, io base 0000ef80 Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated. uhci-hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 hub 1-0:0: USB hub found hub 1-0:0: 2 ports detected drivers/usb/core/usb.c: registered new driver hiddev drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 Advanced Linux Sound Architecture Driver Version 0.9.4 (Mon Jun 09 12:01:18 2003 UTC). ALSA device list: #0: Yamaha DS-XG PCI (YMF754) at 0xfebf0000, irq 5 NET4: Linux TCP/IP 1.0 for NET4.0 PCI: Enabling device 02:00.0 (0000 -> 0003) 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 02:00.0: 3Com PCI 3CCFE575CT Tornado CardBus at 0x1000. Vers LK1.1.19 PCI: Setting latency timer of device 02:00.0 to 64 hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x301 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. ACPI: (supports S0 S3 S4 S5) VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 108k freed hub 1-0:0: new USB device on port 1, assigned address 2 input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-00:07.2-1 hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x101 hub 1-0:0: new USB device on port 2, assigned address 3 hub 1-2:0: USB hub found hub 1-2:0: 2 ports detected Adding 257032k swap on /dev/hda2. Priority:-1 extents:1 blk: queue c039eb5c, I/O limit 4095Mb (mask 0xffffffff) hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hdc: drive_cmd: error=0x04Aborted Command ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (2047 buckets, 16376 max) - 160 bytes per conntrack spurious 8259A interrupt: IRQ7.