Re: [BUG] 2.6.0-test2 loses time on 486

[john stultz <johnstul@us.ibm.com>]

On Wed, 2003-07-30 at 15:52, Mikael Pettersson wrote:
> On 30 Jul 2003 13:08:44 -0700, john stultz <johnstul@us.ibm.com> wrote:

> >Well, I suspect its just the first. If you're not generating interrupts
> >then I'm doubtful the IDE driver is at fault (although I'd believe it if
> >you were losing time under load). Also the PIT based time source is
> >pretty simple and hasn't functionally changed much (well, it has been
> >moved around a bit). 
> >
> >It may be the timer interrupt has grown in cost since the argument to
> >change HZ to 1000 was made. Although using the PIT there isn't much we
> >do from a time of day perspective. If I can find a second, I'll see if I
> >can compare interrupt overhead between 2.4 and 2.5. But I'd imagine the
> >box would barely be usable if we're wasting all our time handling timer
> >interrupts (is it usable??).
> 
> Well, the test the box was running (recompile 2.4.22-pre) generates
> a lot of disk traffic, including swapping, since the box has so little
> RAM (only 28M). So IDE interrupts are frequent and the box is both
> CPU and I/O bound. I can still log in to it, type shell commands and
> so on, but starting emacs would be a bad idea...

Oh, if you're compiling then IDE is probably contributing to the
problem. However, I thought you said you lost time when idling as well?
 
> To test the "486 can't cope with HZ=1000" thesis I tried a RedHat
> 2.4.18-27.8 kernel which has a CONFIG_HZ option. Using 2.4.18-27.8
> with CONFIG_HZ=1000, the box still lost time during the "recompile
> 2.4.22-pre" test, but only about 15 seconds per hour instead of 2
> minutes per hour as it does with 2.6-test.

Ah, good call testing 2.4 w/ HZ=1000. Yea, as for the difference between
2.4 and 2.6-test, I'm guessing something in do_timer_interrupt_hook()
has grown. Booting a 586+ system w/ "clock=pit" and instrumenting that
function w/ rdtsc calls would probably show what has slowed down. 

Regardless, as you've demonstrated, it seems 486s just can't keep up w/
HZ=1000. Maybe we need to look into some sort of processor specific HZ
config option?

thanks
-john