Total memory = 384MB; using 1024kB for hash table (at c0400000) Linux version 2.6.0-test2 (jocelyn@(none)) (gcc version 3.2) #6 Thu Jul 31 02:50:33 CEST 2003 Found Uninorth memory controller & host bridge, revision: 192 Mapped at 0xfdf3c000 Found a Pangea mac-io controller, rev: 0, mapped at 0xfdebc000 Processor NAP mode on idle enabled. PowerMac motherboard: iBook 2 rev. 2 Found UniNorth PCI host bridge at 0xf0000000. Firmware bus number: 0->0 Found UniNorth PCI host bridge at 0xf2000000. Firmware bus number: 0->0 Found UniNorth PCI host bridge at 0xf4000000. Firmware bus number: 0->0 PMU driver 2 initialized for Core99, firmware: 0c On node 0 totalpages: 98304 DMA zone: 98304 pages, LIFO batch:16 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 Building zonelist for node : 0 Kernel command line: root=/dev/ide/host0/bus0/target0/lun0/part14 ro PowerMac using OpenPIC irq controller OpenPIC Version 1.2 (4 CPUs and 64 IRQ sources) at fc66e000 OpenPIC timer frequency is 4.160000 MHz PID hash table entries: 2048 (order 11: 16384 bytes) GMT Delta read from XPRAM: 120 minutes, DST: on time_init: decrementer frequency = 24.835245 MHz Console: colour dummy device 80x25 Calibrating delay loop... 1389.36 BogoMIPS Memory: 384064k available (2364k kernel code, 1248k data, 140k init, 0k highmem) AGP special page: 0xd7fff000 Security Scaffold v1.0.0 initialized Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root POSIX conformance testing by UNIFIX Initializing RT netlink socket PCI: Probing PCI hardware BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) SCSI subsystem initialized drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub radeonfb_pci_register BEGIN PCI: Enabling device 0000:00:10.0 (0086 -> 0087) radeonfb: ref_clk=2700, ref_div=12, xclk=16615 from OF radeonfb: probed DDR SGRAM 16384k videoram radeonfb: detected DFP panel size from EDID: 1024x768 Registered "ati" backlight controller, level: 7/15 radeonfb: ATI Radeon M6 LY DDR SGRAM 16 MB radeonfb: DVI port LCD monitor connected radeonfb: CRT port no monitor connected radeonfb_pci_register END hStart = 1048, hEnd = 1184, hTotal = 1344 vStart = 771, vEnd = 777, vTotal = 806 h_total_disp = 0x7f00a7 hsync_strt_wid = 0x910412 v_total_disp = 0x2ff0325 vsync_strt_wid = 0x860302 pixclock = 15384 freq = 6500 post div = 0x2 fb_div = 0x3a ppll_div_3 = 0x1003a ron = 1152, roff = 18256 vclk_freq = 6525, per = 652 Console: switching to colour frame buffer device 128x48 pty: 256 Unix98 ptys configured Thermal assist unit using timers, shrink_timer: 200 jiffies devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Initializing Cryptographic API Generic RTC Driver v1.07 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected Apple UniNorth/Pangea chipset agpgart: Maximum main memory to use for agp memory: 322M agpgart: configuring for size idx: 4 agpgart: AGP aperture is 16M @ 0x0 [drm] Initialized radeon 1.9.0 20020828 on minor 0 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide0: Found Apple KeyLargo ATA-4 controller, bus ID 2 Probing IDE interface ide0... hda: IBM-IC25N030ATCS04-0, ATA DISK drive hdb: SONY CD-RW CRX800E, ATAPI CD/DVD-ROM drive ide_pmac: Set UDMA timing for mode 2, reg: 0x1090038c hda: Enabling Ultra DMA 2 ide_pmac: MDMA, cycleTime: 120, accessTime: 75, recTime: 45 ide_pmac: Set MDMA timing for mode 2, reg: 0x0001978c hdb: Enabling MultiWord DMA 2 Using anticipatory scheduling elevator ide0 at 0xda11c000-0xda11c007,0xda11c160 on irq 19 hda: max request size: 128KiB hda: host protected area => 1 hda: 58605120 sectors (30006 MB) w/1768KiB Cache, CHS=58140/16/63, UDMA(33) hda: only one drive on a channel supported for tcq /dev/ide/host0/bus0/target0/lun0: [mac] p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: SONY Model: CD-RW CRX800E Rev: 1.3p Type: CD-ROM ANSI SCSI revision: 02 sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.12 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5 Console: switching to colour frame buffer device 128x48 MacIO PCI driver attached to Pangea chipset Macintosh non-volatile memory driver v1.0 input: Macintosh mouse button emulation apm_emu: APM Emulation 0.5 initialized. ohci-hcd: 2003 Feb 24 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci-hcd: block sizes: ed 64 td 64 PCI: Enabling device 0001:01:18.0 (0000 -> 0002) ohci-hcd 0001:01:18.0: Apple Computer Inc. KeyLargo/Pangea USB ohci-hcd 0001:01:18.0: irq 27, pci mem da128000 ohci-hcd 0001:01:18.0: new USB bus registered, assigned bus number 1 adb: starting probe task... hub 1-0:0: USB hub found hub 1-0:0: 2 ports detected PCI: Enabling device 0001:01:19.0 (0000 -> 0002) ohci-hcd 0001:01:19.0: Apple Computer Inc. KeyLargo/Pangea USB (#2) ohci-hcd 0001:01:19.0: irq 28, pci mem da12a000 ohci-hcd 0001:01:19.0: new USB bus registered, assigned bus number 2 adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f ADB keyboard at 2, handler 1 Detected ADB keyboard, type ISO, swapping keys. input: ADB keyboard on adb2:2.c4/input input: ADB Powerbook buttons on adb7:7.1f/input ADB mouse at 3, handler set to 4 (trackpad)<6>hub 2-0:0: USB hub found hub 2-0:0: 2 ports detected input: ADB mouse on adb3:3.01/input adb: finished probe task... drivers/usb/core/usb.c: registered new driver hiddev drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice i2c /dev entries driver module version 2.7.0 (20021208) Found KeyWest i2c on "uni-n", 2 channels, stepping: 4 bits Found KeyWest i2c on "mac-io", 1 channel, stepping: 4 bits NET4: Linux TCP/IP 1.0 for NET4.0 hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x301 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 140k init 4k chrp 8k prep hub 1-0:0: new USB device on port 1, assigned address 2 input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0001:01:18.0-1 input: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0001:01:18.0-1 hub 2-0:0: debounce: port 1: delay 100ms stable 4 status 0x101 hub 2-0:0: new USB device on port 1, assigned address 2 hub 2-1:0: USB hub found hub 2-1:0: 4 ports detected Adding 524280k swap on /dev/ide/host0/bus0/target0/lun0/part13. Priority:-1 extents:1 EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended sungem.c:v0.97 3/20/02 David S. Miller (davem@redhat.com) eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:93:ab:0e:76 eth0: Found BCM5221 PHY eth0: Link is up at 100 Mbps, half-duplex. eth0: Pause is disabled ieee1394: Loaded CMP driver ohci1394: $Rev: 1011 $ Ben Collins ohci1394_0: Unexpected PCI resource length of 1000! ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] bad: scheduling while atomic! Call trace: [c000b5bc] dump_stack+0x18/0x28 [c0015f7c] schedule+0x5f4/0x5f8 [c0007c3c] syscall_exit_work+0x108/0x10c [ce1afd48] 0xce1afd48 [da3e7b40] nodemgr_add_host+0xcc/0x13c [ieee1394] [da3e33c4] highlevel_add_host+0xac/0xb4 [ieee1394] [da3e25c8] hpsb_add_host+0x80/0xc0 [ieee1394] [da3a4228] ohci1394_pci_probe+0x440/0x504 [ohci1394] [c010d9a0] pci_device_probe_static+0x64/0x80 [c010db7c] __pci_device_probe+0x50/0x70 [c010dbcc] pci_device_probe+0x30/0x60 [c0147820] bus_match+0x50/0x8c [c0147974] driver_attach+0x80/0x88 [c0147c8c] bus_add_driver+0x98/0x100 [c014810c] driver_register+0x30/0x40 ieee1394: Loaded AMDTP driver ieee1394: Node added: ID:BUS[0-00:1023] GUID[0030e000e0000e1c] ieee1394: Host added: ID:BUS[0-01:1023] GUID[000393fffeab0e76] sbp2: $Rev: 1010 $ Ben Collins scsi1 : SCSI emulation for IEEE-1394 SBP-2 Devices ieee1394: sbp2: Logged into SBP-2 device ieee1394: sbp2: Node 0-00:1023: Max speed [S400] - Max payload [2048] Vendor: Maxtor 6 Model: Y080L0 Rev: Type: Direct-Access ANSI SCSI revision: 06 Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0 SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) sda: asking for cache data failed sda: assuming drive cache: write through devfs_put(ce19fb00): poisoned pointer Forcing Oops kernel BUG in devfs_put at fs/devfs/base.c:922! Oops: Exception in kernel mode, sig: 5 [#1] NIP: C00AB920 LR: C00AB920 SP: D0499E50 REGS: d0499da0 TRAP: 0700 Not tainted MSR: 00029032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 TASK = d7db3800[44] 'devfsd' Last syscall: 3 GPR00: C00AB920 D0499E50 D7DB3800 0000000D C000AF44 00000000 00000000 C0370A64 GPR08: 00000000 00000000 28244884 D0499D60 88244888 100216B0 00000000 00000000 GPR16: 00000020 CE0EA3EC 00000000 00000021 00000001 00000000 000003FF 00000000 GPR24: 00000021 7FFFF888 C035DB40 00000400 C0A6A800 00000000 CE19FB00 CE19FB00 Call trace: [c00aeab0] devfsd_read+0x35c/0x460 [c005d374] vfs_read+0x10c/0x154 [c005d608] sys_read+0x40/0x74 [c000799c] ret_from_syscall+0x0/0x44 /dev/scsi/host1/bus0/target0/lun0: [mac] p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 tumbler: cannot initialize the MCS nfs warning: mount version older than kernel nfs warning: mount version older than kernel nfs warning: mount version older than kernel