From: Juergen Rose <rose@rz.uni-potsdam.de>
To: linux-kernel@vger.kernel.org
Cc: Petr Vandrovec <vandrove@vc.cvut.cz>
Subject: 2.6.0-test2 does not boot with matroxfb
Date: 08 Aug 2003 17:45:28 +0200 [thread overview]
Message-ID: <1060357528.19833.11.camel@moen.bioinf.mdc-berlin.de> (raw)
[-- Attachment #1: Type: text/plain, Size: 2871 bytes --]
I tried on my PC with a Matrox-G450 several kernel and boot options.
Every time when the console should work with matrox framebuffer, linux
was crashed. With 2.6.0-test2 and 2.6.0-test2-bk7 I had the following
warning performing ''make modules_install''
WARNING:
/lib/modules/2.6.0-test2[-bk7]/kernel/drivers/video/matrox/matroxfb_crtc2.ko needs unknown symbol matroxfb_enable_irq
This WARNING disapears for 2.6.0-test2-mm5. But also 2.6.0-test2-mm5
does not work with framebuffer. I tested the following combinations of
parameters:
|VGA = 6 | VGA = 775 |
| | |video=matrox:
| | | vesa:0x31C
----------------------------+---------+---------------+---------------
2.4.22-pre6-ac1 | | |
CONFIG_FB=y | VGA=6 | VGA=775 | vesa:0x31C
CONFIG_VIDEO_SELECT=y | | |
----------------------------+---------+---------------+---------------
2.6.0-test2 | |crashes |crashes
CONFIG_FRAMEBUFFER_CONSOLE=y| VGA=6 |after |after
CONFIG_VIDEO_SELECT=y | |BIOS DATA CHECK|BIOS DATA CHECK
----------------------------+---------+---------------+---------------
2.6.0-test2 | | |
CONFIG_FRAMEBUFFER_CONSOLE=y| 640x480 | 640x480 | 640x480
CONFIG_VIDEO_SELECT=n | | |
----------------------------+---------+---------------+---------------
2.6.0-test2 | |crashes |crashes
without console-fb | VGA=6 |after |after
CONFIG_VIDEO_SELECT=y | |BIOS DATA CHECK|BIOS DATA CHECK
----------------------------+---------+---------------+---------------
2.6.0-test2 | | |
without console-fb | 640x480 | 640x480 | 640x480
CONFIG_VIDEO_SELECT=n | | |
----------------------------+---------+---------------+---------------
2.6.0-test2-bk7 | |crashes |crashes
with console-fb | VGA=6 |after |after
CONFIG_VIDEO_SELECT=y | |BIOS DATA CHECK|BIOS DATA CHECK
----------------------------+---------+---------------+---------------
2.6.0-test2-mm5 | |crashes |crashes
CONFIG_FRAMEBUFFER_CONSOLE=y| VGA=6 |after |after
CONFIG_VIDEO_SELECT=y | |BIOS DATA CHECK|BIOS DATA CHECK
----------------------------+---------+---------------+---------------
Because I am afraid, that the lines of the table are wrapped by the mail
client, the is alsa attached to this mail. Any hint would very much
appreciated.
Regards
Juergen
--
Juergen Rose <rose@rz.uni-potsdam.de>
Max-Delbrueck-Zentrum
[-- Attachment #2: 2.6.0-test2_problems_table.txt --]
[-- Type: text/plain, Size: 2143 bytes --]
Results of some kernel and boot parameters:
|VGA = 6 | VGA = 775 |
| | |video=matrox:
| | | vesa:0x31C
----------------------------+---------+---------------+---------------
2.4.22-pre6-ac1 | | |
CONFIG_FB=y | VGA=6 | VGA=775 | vesa:0x31C
CONFIG_VIDEO_SELECT=y | | |
----------------------------+---------+---------------+---------------
2.6.0-test2 | |crashes |crashes
CONFIG_FRAMEBUFFER_CONSOLE=y| VGA=6 |after |after
CONFIG_VIDEO_SELECT=y | |BIOS DATA CHECK|BIOS DATA CHECK
----------------------------+---------+---------------+---------------
2.6.0-test2 | | |
CONFIG_FRAMEBUFFER_CONSOLE=y| 640x480 | 640x480 | 640x480
CONFIG_VIDEO_SELECT=n | | |
----------------------------+---------+---------------+---------------
2.6.0-test2 | |crashes |crashes
without console-fb | VGA=6 |after |after
CONFIG_VIDEO_SELECT=y | |BIOS DATA CHECK|BIOS DATA CHECK
----------------------------+---------+---------------+---------------
2.6.0-test2 | | |
without console-fb | 640x480 | 640x480 | 640x480
CONFIG_VIDEO_SELECT=n | | |
----------------------------+---------+---------------+---------------
2.6.0-test2-bk7 | |crashes |crashes
with console-fb | VGA=6 |after |after
CONFIG_VIDEO_SELECT=y | |BIOS DATA CHECK|BIOS DATA CHECK
----------------------------+---------+---------------+---------------
2.6.0-test2-mm5 | |crashes |crashes
CONFIG_FRAMEBUFFER_CONSOLE=y| VGA=6 |after |after
CONFIG_VIDEO_SELECT=y | |BIOS DATA CHECK|BIOS DATA CHECK
----------------------------+---------+---------------+---------------
next reply other threads:[~2003-08-08 15:45 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-08-08 15:45 Juergen Rose [this message]
2003-08-08 16:16 Petr Vandrovec
2003-08-09 11:40 Jocelyn Mayer
2003-08-11 18:01 ` Jocelyn Mayer
2003-08-11 18:07 ` Dave Jones
2003-08-11 18:14 ` Greg KH
2003-08-11 18:55 ` Jocelyn Mayer
2003-08-11 18:56 ` Dave Jones
2003-08-11 19:10 ` Jocelyn Mayer
2003-08-09 21:07 Juergen Rose
2003-08-11 18:29 Petr Vandrovec
2003-08-11 19:00 ` Jocelyn Mayer
2003-08-11 19:14 Petr Vandrovec
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1060357528.19833.11.camel@moen.bioinf.mdc-berlin.de \
--to=rose@rz.uni-potsdam.de \
--cc=linux-kernel@vger.kernel.org \
--cc=vandrove@vc.cvut.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®