From: Stian Jordet <liste@jordet.nu>
To: Linux kernel <linux-kernel@vger.kernel.org>
Subject: PCMCIA problem
Date: Fri, 22 Aug 2003 02:18:58 +0200 [thread overview]
Message-ID: <1061511537.903.2.camel@chevrolet.hybel> (raw)
Hi,
I don't really know wether this is kernel problem, pcmcia-cs problem or
a hardware problem. I have a very, very cheap mmc/sc card -> pcmcia
converter. When I insert it, I get these messages:
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x37f
0x3c0-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
hde: PCMCIA/SD ADAPTER, CFA DISK drive
hdf: probing with STATUS(0x50) instead of ALTSTATUS(0x0a)
hdf: PCMCIA/SD ADAPTER, CFA DISK drive
ide2 at 0x100-0x107,0x10e on irq 18
hde: max request size: 128KiB
hde: 125440 sectors (64 MB) w/1KiB Cache, CHS=490/8/32
hde: hde1
hdf: max request size: 128KiB
hdf: 125440 sectors (64 MB) w/1KiB Cache, CHS=490/8/32
hdf:hdf: status error: status=0x78 { DriveReady DeviceFault
SeekComplete DataRequest }
hdf: drive not ready for command
ide2: reset: success
hdf: status error: status=0x79 { DriveReady DeviceFault SeekComplete
DataRequest Error }
hdf: status error: error=0x79 { UncorrectableError SectorIdNotFound
AddrMarkNotFound }, LBAsect=7991417, sector=0
hdf: drive not ready for command
ide2: reset: success
hdf: status error: status=0x79 { DriveReady DeviceFault SeekComplete
DataRequest Error }
hdf: status error: error=0x79 { UncorrectableError SectorIdNotFound
AddrMarkNotFound }, LBAsect=7991417, sector=0
end_request: I/O error, dev hdf, sector 0
Buffer I/O error on device hdf, logical block 0
hdf: drive not ready for command
hdf: status timeout: status=0xe1 { Busy }
hdf: drive not ready for command
ide2: reset: success
hdf: status error: status=0x79 { DriveReady DeviceFault SeekComplete
DataRequest Error }
hdf: status error: error=0x79 { UncorrectableError SectorIdNotFound
AddrMarkNotFound }, LBAsect=7991417, sector=0
hdf: drive not ready for command
ide2: reset: success
hdf: status error: status=0x79 { DriveReady DeviceFault SeekComplete
DataRequest Error }
hdf: status error: error=0x79 { UncorrectableError SectorIdNotFound
AddrMarkNotFound }, LBAsect=7991417, sector=0
end_request: I/O error, dev hdf, sector 0
Buffer I/O error on device hdf, logical block 0
hdf: drive not ready for command
unable to read partition table
ide-cs: hde: Vcc = 3.3, Vpp = 0.0
hde: hde1
It seems to work perfect, but why on earth does it seem to try hdf for
anything? There is no card in the other slot? Anyone knows? It's the
same with 2.4.22-rc2 and 2.6.0-test3-latest-bk.
Best regards,
Stian
reply other threads:[~2003-08-22 0:18 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1061511537.903.2.camel@chevrolet.hybel \
--to=liste@jordet.nu \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®