Hi! With 2.6.0-test4-bk9, if I try to boot my system with my 3Com Corporation 3CCFE575CT Cyclone CardBus NIC inserted into socket #1 (the upper one), the system hangs. I can boot without the CardBus NIC inserted. Later, I can plug in the CardBus NIC. This is the dmesg of the system when booting with the NIC inserted: --- dmesg --- Linux version 2.6.0-test4-bk9 (root@glass.felipe-alfaro.com) (gcc version 3.3.1 20030814 (Red H at Linux 3.3.1-2)) #1 Sun Sep 7 21:53:40 CEST 2003 Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data) BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 255MB LOWMEM available. On node 0 totalpages: 65520 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61424 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 NEC ) @ 0x000fb550 ACPI: RSDT (v001 NEC ND000020 0x00000001 MSFT 0x00000097) @ 0x0fff0000 ACPI: FADT (v001 NEC ND000020 0x00000001 MSFT 0x00000097) @ 0x0fff0030 ACPI: BOOT (v001 NEC ND000020 0x00000001 MSFT 0x00000097) @ 0x0fff00b0 ACPI: DSDT (v001 NEC ND000020 0x00000001 MSFT 0x0100000a) @ 0x00000000 Building zonelist for node : 0 Kernel command line: root=/dev/hda4 splash=verbose showopts Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 697.189 MHz processor. Console: colour VGA+ 80x25 Memory: 255896k/262080k available (1886k kernel code, 5460k reserved, 699k data, 116k init, 0k highmem) Calibrating delay loop... 1376.25 BogoMIPS Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 CPU: Intel Pentium III (Coppermine) stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20030813 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [NRTH] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.NRTH._PRT] ACPI: Embedded Controller [EC0] (gpe 9) ACPI: Power Resource [PUSB] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 10, disabled) ACPI: PCI Interrupt Link [LNKB] (IRQs 5, disabled) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10, disabled) ACPI: PCI Interrupt Link [LNKD] (IRQs 9, disabled) Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' pty: 256 Unix98 ptys configured SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 IA-32 Microcode Update Driver: v1.11 Initializing Cryptographic API Limiting direct PCI/PCI transfers. ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery absent) ACPI: Power Button (CM) [PRB1] ACPI: Lid Switch [LID0] ACPI: Fan [FANC] (on) ACPI: Processor [CPU0] (supports C1) ACPI: Thermal Zone [THRM] (64 C) Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 440BX Chipset. agpgart: Maximum main memory to use for agp memory: 203M agpgart: AGP aperture is 256M @ 0xe0000000 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 0000:00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: HITACHI_DK23BA-20, ATA DISK drive Using anticipatory scheduling io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: MATSHITADVD-ROM SR-8185, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 39070080 sectors (20003 MB) w/2048KiB Cache, CHS=38760/16/63, UDMA(33) hda: hda1 hda2 hda3 hda4 Yenta: CardBus bridge found at 0000:00:0c.0 [1033:80b6] yenta 0000:00:0c.0: Preassigned resource 3 busy, reconfiguring... Yenta: ISA IRQ list 08d8, PCI irq10 Socket status: 30000006 --- end --- Attached is the .config file used to build the kernel and a full lspci -vvv of 2.6.0-test4-bk9 once the system has boot and the card has been inserted. PS: This doesn't happen on 2.6.0-test4-mm5, for example.