From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262409AbTJGPfq (ORCPT ); Tue, 7 Oct 2003 11:35:46 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261271AbTJGPfq (ORCPT ); Tue, 7 Oct 2003 11:35:46 -0400 Received: from rei.purplehat.net ([216.234.116.164]:7907 "EHLO rei.purplehat.net") by vger.kernel.org with ESMTP id S262409AbTJGPfc (ORCPT ); Tue, 7 Oct 2003 11:35:32 -0400 Subject: More 2.6.0-test6 PCMCIA and Orinoco problems From: "Joshua M. Thompson" To: linux-kernel@vger.kernel.org Content-Type: text/plain Organization: Planet Jurai Message-Id: <1065540880.1415.22.camel@lumiere.jurai.org> Mime-Version: 1.0 X-Mailer: Ximian Evolution 1.2.2 (1.2.2-5) Date: 07 Oct 2003 11:34:40 -0400 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Been searching the net and list archives for a three days now and can't find any reports of this exact problem, so here goes: I finally decided to try out 2.6 on my notebook again. It's a Gateway 600E (P4-M 2.0, Intel 845 chipset, TI PCI1250 cardbus controller) running RedHat 9.0, upgraded with the beta RPMS from http://people.redhat.com/arjanv/2.5/. I'm up and running MOSTLY ok except that I can't get PCMCIA to work. Specifically, my built-in Orinoco wireless card doesn't work anymore, nor does an Orinoco Gold card I happen to have lying around. PCMCIA starts up ok and the orinoco_cs driver loads; however it fails to start, giving only the error message "ds: unable to create instance of 'orinoco_cs'". I've tried several solutions. Tried booting with ACPI off, with APIC off, and even tried "cardctl eject; cardctl insert" which seems to help some people. Same error every time. The wireless card works fine with 2.4.20 and also worked fine when I briefly tried 2.5.68 a while back. Here's my dmesg output: Linux version 2.6.0-0.test6.1.48 (bhcompile@porky.devel.redhat.com) (gcc version 3.3.1 20030930 (Red Hat Linux 3.3.1-6)) #1 Fri Oct 3 07:53:36 EDT 2003 Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e800 (usable) BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fef0000 (usable) BIOS-e820: 000000001fef0000 - 000000001feff000 (ACPI data) BIOS-e820: 000000001feff000 - 000000001ff00000 (ACPI NVS) BIOS-e820: 000000001ff00000 - 000000001ff80000 (usable) BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. On node 0 totalpages: 130944 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126848 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f6620 ACPI: RSDT (v001 GATEWA 600YG2 0x20021212 LTP 0x00000000) @ 0x1fef8198 ACPI: FADT (v001 GATEWA 600YG2 0x20021212 PTL 0x0000001e) @ 0x1fefef64 ACPI: BOOT (v001 GATEWA 600YG2 0x20021212 LTP 0x00000001) @ 0x1fefefd8 ACPI: DSDT (v001 GATEWA 600YG2 0x20021212 MSFT 0x0100000e) @ 0x00000000 Building zonelist for node : 0 Kernel command line: ro root=LABEL=/ hdb=ide-scsi ide_setup: hdb=ide-scsi Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 1995.118 MHz processor. Console: colour VGA+ 80x25 Memory: 514844k/523776k available (1641k kernel code, 8096k reserved, 712k data, 156k init, 0k highmem) Calibrating delay loop... 3932.16 BogoMIPS Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. Failure registering capabilities with the kernel selinux_register_security: Registering secondary module capability Capability LSM initialized Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: bfebf9ff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd999, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20030918 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *10) ACPI: PCI Interrupt Link [LNKB] (IRQs *10) ACPI: PCI Interrupt Link [LNKC] (IRQs *10) ACPI: PCI Interrupt Link [LNKD] (IRQs *5) ACPI: PCI Interrupt Link [LNKE] (IRQs *10) ACPI: PCI Interrupt Link [LNKF] (IRQs 10) ACPI: PCI Interrupt Link [LNKG] (IRQs 10) ACPI: PCI Interrupt Link [LNKH] (IRQs 10) ACPI: Embedded Controller [EC0] (gpe 29) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] ACPI: Power Resource [PFN0] (off) ACPI: Power Resource [PFN1] (off) Linux Plug and Play Support v0.97 (c) Adam Belay ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' divert: not allocating divert_blk for non-ethernet device lo SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found pty: 2048 Unix98 ptys configured Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel i845 Chipset. agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 64M @ 0xec000000 Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3M: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ICH3M: chipset revision 2 ICH3M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:pio, hdd:pio hda: IC25N040ATCS04-0, ATA DISK drive hdb: TOSHIBA DVD-ROM SD-R6012, ATAPI CD/DVD-ROM drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 78140160 sectors (40007 MB) w/1768KiB Cache, CHS=65535/16/63, UDMA(100) hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > ide-floppy driver 0.99.newide mice: PS/2 mouse device common for all mice i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 Synaptics Touchpad, model: 1 Firmware: 5.9 Sensor: 28 new absolute packet format Touchpad has extended capability bits -> four buttons -> multifinger detection -> palm detection input: SynPS/2 Synaptics TouchPad on isa0060/serio4 serio: i8042 AUX3 port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 172k freed VFS: Mounted root (ext2 filesystem). kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 156k freed drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 uhci-hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci-hcd 0000:00:1d.0: irq 10, io base 00001800 uhci-hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci-hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci-hcd 0000:00:1d.1: irq 5, io base 00001820 uhci-hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected drivers/usb/core/usb.c: registered new driver hiddev drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver EXT3 FS on hda2, internal journal Adding 1052216k swap on /dev/hda5. Priority:-1 extents:1 kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. ohci1394: $Rev: 1045 $ Ben Collins ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[e8208000-e82087ff] Max Packet=[2048] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0b80602006c1d] SCSI subsystem initialized scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: TOSHIBA Model: DVD-ROM SD-R6012 Rev: 1G32 Type: CD-ROM ANSI SCSI revision: 02 kudzu: numerical sysctl 1 23 is obsolete. parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) inserting floppy driver for 2.6.0-0.test6.1.48 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 ip_tables: (C) 2000-2002 Netfilter core team Disabled Privacy Extensions on device c0319060(lo) ip_tables: (C) 2000-2002 Netfilter core team Intel(R) PRO/100 Network Driver - version 2.3.30-k1 Copyright (c) 2003 Intel Corporation divert: allocating divert_blk for eth0 e100: selftest OK. e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] Yenta: CardBus bridge found at 0000:02:02.0 [107b:0602] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta: ISA IRQ list 0898, PCI irq10 Socket status: 30000006 Yenta: CardBus bridge found at 0000:02:02.1 [107b:0602] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta: ISA IRQ list 0898, PCI irq10 Socket status: 30000006 PCI: Enabling device 0000:02:04.0 (0104 -> 0106) Yenta: CardBus bridge found at 0000:02:04.0 [12a3:ab01] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta: ISA IRQ list 0000, PCI irq10 Socket status: 30000010 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x1c0-0x1cf 0x370-0x37f 0x3c0-0x3df 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. orinoco.c 0.13e (David Gibson and others) orinoco_cs.c 0.13e (David Gibson and others) ds: unable to create instance of 'orinoco_cs'! And, for comparison, here is a normal boot on 2.4.20: Linux version 2.4.20-20.9 (bhcompile@stripples.devel.redhat.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Mon Aug 18 11:45:58 EDT 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e800 (usable) BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fef0000 (usable) BIOS-e820: 000000001fef0000 - 000000001feff000 (ACPI data) BIOS-e820: 000000001feff000 - 000000001ff00000 (ACPI NVS) BIOS-e820: 000000001ff00000 - 000000001ff80000 (usable) BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. On node 0 totalpages: 130944 zone(0): 4096 pages. zone(1): 126848 pages. zone(2): 0 pages. Kernel command line: ro root=LABEL=/ hdb=ide-scsi ide_setup: hdb=ide-scsi Initializing CPU#0 Detected 1994.167 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3971.48 BogoMIPS Memory: 510804k/523776k available (1358k kernel code, 10340k reserved, 1004k data, 132k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebf9ff 00000000 00000000 00000000 CPU: Common caps: bfebf9ff 00000000 00000000 00000000 CPU: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfd999, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge PCI: Using IRQ router PIIX [8086/248c] at 00:1f.0 PCI: Found IRQ 10 for device 00:1f.1 PCI: Sharing IRQ 10 with 02:02.0 PCI: Sharing IRQ 10 with 02:02.1 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Starting kswapd VFS: Disk quotas vdquot_6.5.1 pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS0 at 0x03f8 (irq = 4) is a 16550A PCI: Found IRQ 10 for device 00:1f.6 PCI: Sharing IRQ 10 with 00:1f.3 PCI: Sharing IRQ 10 with 02:05.0 Real Time Clock Driver v1.10e Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3M: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) PCI: Found IRQ 10 for device 00:1f.1 PCI: Sharing IRQ 10 with 02:02.0 PCI: Sharing IRQ 10 with 02:02.1 ICH3M: chipset revision 2 ICH3M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:pio, hdd:pio hda: IC25N040ATCS04-0, ATA DISK drive hdb: TOSHIBA DVD-ROM SD-R6012, ATAPI CD/DVD-ROM drive blk: queue c03cdfe0, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: attached ide-disk driver. hda: host protected area => 1 hda: 78140160 sectors (40008 MB) w/1768KiB Cache, CHS=4864/255/63, UDMA(100) ide-floppy driver 0.99.newide Partition check: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 166k freed VFS: Mounted root (ext2 filesystem). LVM version 1.0.5+(22/07/2002) module loaded Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 132k freed usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 11:55:13 Aug 18 2003 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 10 for device 00:1d.0 PCI: Sharing IRQ 10 with 01:00.0 PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0x1800, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 5 for device 00:1d.1 PCI: Sharing IRQ 5 with 02:03.0 PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 5 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal loop: loaded (max 8 devices) Adding Swap: 1052216k swap-space (priority -1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. ohci1394: $Rev: 693 $ Ben Collins PCI: Found IRQ 10 for device 02:05.0 PCI: Sharing IRQ 10 with 00:1f.3 PCI: Sharing IRQ 10 with 00:1f.6 ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[e8208000-e82087ff] Max Packet=[2048] ieee1394: SelfID completion called outside of bus reset! ieee1394: Host added: Node[00:1023] GUID[00e0b80602006c1d] [Linux OHCI-1394] SCSI subsystem driver Revision: 1.00 hdb: attached ide-scsi driver. scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: TOSHIBA Model: DVD-ROM SD-R6012 Rev: 1G32 Type: CD-ROM ANSI SCSI revision: 02 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 ip_tables: (C) 2000-2002 Netfilter core team ip_tables: (C) 2000-2002 Netfilter core team Intel(R) PRO/100 Network Driver - version 2.2.21-k1 Copyright (c) 2003 Intel Corporation PCI: Found IRQ 10 for device 02:08.0 PCI: Sharing IRQ 10 with 02:04.0 e100: selftest OK. divert: allocating divert_blk for eth0 e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Found IRQ 10 for device 02:02.0 PCI: Sharing IRQ 10 with 00:1f.1 PCI: Sharing IRQ 10 with 02:02.1 PCI: Found IRQ 10 for device 02:02.1 PCI: Sharing IRQ 10 with 00:1f.1 PCI: Sharing IRQ 10 with 02:02.0 PCI: Enabling device 02:04.0 (0104 -> 0106) PCI: Found IRQ 10 for device 02:04.0 PCI: Sharing IRQ 10 with 02:08.0 Yenta IRQ list 0a98, PCI irq10 Socket status: 30000006 Yenta IRQ list 0a98, PCI irq10 Socket status: 30000006 Yenta IRQ list 0000, PCI irq10 Socket status: 30000010 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x1c0-0x1cf 0x370-0x37f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. hermes.c: 4 Dec 2002 David Gibson orinoco.c 0.13d (David Gibson and others) orinoco_cs.c 0.13d (David Gibson and others) divert: allocating divert_blk for eth1 eth1: Station identity 001f:0001:0008:000a eth1: Looks like a Lucent/Agere firmware version 8.10 eth1: Ad-hoc demo mode supported eth1: IEEE standard IBSS ad-hoc mode supported eth1: WEP supported, 104-bit key eth1: MAC address 00:02:2D:B0:CF:C7 eth1: Station name "HERMES I" eth1: ready eth1: index 0x01: Vcc 3.3, irq 10, io 0x0100-0x013f eth1: New link status: Connected (0001) Both kernel versions map the Yenta controllers onto irq 10. In fact the only difference in /proc/interrupts between the two versions is ACPI takes irq 9 in 2.6, and as I mentioned above booting without ACPI enabled does not solve the problem. If anyone needs additional information let me know. -- Joshua M. Thompson