From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261332AbTJRJqN (ORCPT ); Sat, 18 Oct 2003 05:46:13 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261380AbTJRJqN (ORCPT ); Sat, 18 Oct 2003 05:46:13 -0400 Received: from slimnet.xs4all.nl ([194.109.194.192]:63135 "EHLO slimnas.slim") by vger.kernel.org with ESMTP id S261332AbTJRJqK (ORCPT ); Sat, 18 Oct 2003 05:46:10 -0400 Subject: Re: [2.6.0-test3,6,7] IDE 'enhanced mode' problems From: Jurgen Kramer To: Jeff Garzik Cc: linux-kernel@vger.kernel.org In-Reply-To: <3F8FE2D1.6090400@pobox.com> References: <1066388412.1585.8.camel@paragon.slim> <3F8FE2D1.6090400@pobox.com> Content-Type: text/plain Message-Id: <1066470285.1554.0.camel@paragon.slim> Mime-Version: 1.0 X-Mailer: Ximian Evolution 1.4.4 (1.4.4-3) Date: Sat, 18 Oct 2003 11:44:45 +0200 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Fri, 2003-10-17 at 14:38, Jeff Garzik wrote: > Jurgen Kramer wrote: > > Hi, > > > > I have various systems running 2.6.0-test kernels without problems so I > > thought lets try 2.6.0-test7 on my main system again...I had run test3 > > without problems on this system but now all of a sudden it could not > > boot 2.6.0-test3/6/7 normally. It would never pass through init > > completely. It just stalled. > > > > The only thing I changed since the last time I ran 2.6.0 successfully > > was that I removed the SATA drive (I am running this on a Asus P4C800). > > In the BIOS the IDE settings where still set to 'Enhanced mode'. The 2.4 > > kernel series doesn't seem to have a problem with it. I can't boot 2.6.0 > > with this setting on. > > > > After changing the mode back to 'Compatible' I can run 2.6.0 properly > > again. > > > > Is this a bug in the IDE ICH5 code? > > > Are you running libata? > > Jeff No. Just plain IDE. Jurgen >