From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263638AbTLXOw1 (ORCPT ); Wed, 24 Dec 2003 09:52:27 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263639AbTLXOw1 (ORCPT ); Wed, 24 Dec 2003 09:52:27 -0500 Received: from mail.aei.ca ([206.123.6.14]:45283 "EHLO aeimail.aei.ca") by vger.kernel.org with ESMTP id S263638AbTLXOwX (ORCPT ); Wed, 24 Dec 2003 09:52:23 -0500 Subject: 2.6 unknown partition table From: Shane Shrybman To: linux-kernel Content-Type: text/plain Organization: Message-Id: <1072277542.10203.14.camel@mars.goatskin.org> Mime-Version: 1.0 X-Mailer: Ximian Evolution 1.2.4 Date: 24 Dec 2003 09:52:22 -0500 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi, I noticed this in the logs yesterday on 2.6.0-test11-mm1 and upgraded to 2.6.0-mm1, but its still there. I use LVM on that disk and it is working fine, (LV file systems are mountable and useable). I recently was experimenting with raid5 on five, 100MB LVs on that disk. Could that maybe have caused this? Since everything has been working fine I don't know at which kernel version this appeared although I have been using 2.6 for over a year. Advice? # fdisk -l /dev/hdg Disk /dev/hdg: 16 heads, 63 sectors, 155114 cylinders Units = cylinders of 1008 * 512 bytes Disk /dev/hdg doesn't contain a valid partition table Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PDC20269: IDE controller at PCI slot 0000:00:0d.0 PDC20269: chipset revision 2 PDC20269: Ultra133 TX2 on pci0000:00:0d.0 PDC20269: 100% native mode on irq 16 ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdg:pio, hdh:pio hde: IBM-DJNA-352030, ATA DISK drive ide2 at 0xb800-0xb807,0xb402 on irq 16 hdg: MAXTOR 6L080J4, ATA DISK drive ide3 at 0xb000-0xb007,0xa802 on irq 16 VIA8237SATA: IDE controller at PCI slot 0000:00:0f.0 VIA8237SATA: chipset revision 128 VIA8237SATA: 100% native mode on irq 20 ide4: BM-DMA at 0x8400-0x8407, BIOS settings: hdi:pio, hdj:pio ide5: BM-DMA at 0x8408-0x840f, BIOS settings: hdk:pio, hdl:pio VP_IDE: IDE controller at PCI slot 0000:00:0f.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0x7800-0x7807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x7808-0x780f, BIOS settings: hdc:DMA, hdd:pio hda: IBM-DJNA-352030, ATA DISK drive hdb: LG DVD-ROM DRD-8160B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: LG CD-RW CED-8120B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hde: max request size: 128KiB hde: 39876480 sectors (20416 MB) w/1966KiB Cache, CHS=39560/16/63, UDMA(33) hde: hde1 hde2 hde3 hde4 < hde5 > hdg: max request size: 128KiB hdg: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(133) hdg: unknown partition table hda: max request size: 128KiB hda: 39876480 sectors (20416 MB) w/1966KiB Cache, CHS=39560/16/63 hda: hda1 hda2 hda3 hda4 < hda5 > cdrom: : unknown mrw mode page hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 end_request: I/O error, dev hdb, sector 0 hdc: ATAPI 32X CD-ROM CD-R/RW drive, 8192kB Cache, DMA end_request: I/O error, dev hdc, sector 0 vgdisplay --- Physical volumes --- vgdisplay PV Name /dev/hdg vgdisplay PV UUID 3q6w4c-bgGg-KgHR-8Orv-hr0n-qFwV-SeCTOv vgdisplay PV Status allocatable vgdisplay Total PE / Free PE 19085 / 1590 vgdisplay Regards, Shane