mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: <Nicolas.Ferre@microchip.com>
To: <Claudiu.Beznea@microchip.com>, <robh+dt@kernel.org>,
	<mark.rutland@arm.com>, <alexandre.belloni@bootlin.com>,
	<Ludovic.Desroches@microchip.com>, <sre@kernel.org>
Cc: <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <linux-pm@vger.kernel.org>
Subject: Re: [PATCH 1/3] power: reset: at91-poweroff: add RTT wakeup capability
Date: Mon, 18 Feb 2019 10:59:15 +0000	[thread overview]
Message-ID: <10737217-cbf5-765c-7bad-2d9f4b038f28@microchip.com> (raw)
In-Reply-To: <1550143407-26109-2-git-send-email-claudiu.beznea@microchip.com>

On 14/02/2019 at 12:24, Claudiu Beznea - M18063 wrote:
> From: Claudiu Beznea <claudiu.beznea@microchip.com>
> 
> Add RTT wakeup capability.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>

Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>

> ---
>   drivers/power/reset/at91-sama5d2_shdwc.c | 14 ++++++++++++++
>   1 file changed, 14 insertions(+)
> 
> diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
> index 2b686c55b717..0747e0cdf350 100644
> --- a/drivers/power/reset/at91-sama5d2_shdwc.c
> +++ b/drivers/power/reset/at91-sama5d2_shdwc.c
> @@ -57,15 +57,21 @@
>   
>   #define SHDW_WK_PIN(reg, cfg)	((reg) & AT91_SHDW_WKUPIS((cfg)->wkup_pin_input))
>   #define SHDW_RTCWK(reg, cfg)	(((reg) >> ((cfg)->sr_rtcwk_shift)) & 0x1)
> +#define SHDW_RTTWK(reg, cfg)	(((reg) >> ((cfg)->sr_rttwk_shift)) & 0x1)
>   #define SHDW_RTCWKEN(cfg)	(1 << ((cfg)->mr_rtcwk_shift))
> +#define SHDW_RTTWKEN(cfg)	(1 << ((cfg)->mr_rttwk_shift))
>   
>   #define DBC_PERIOD_US(x)	DIV_ROUND_UP_ULL((1000000 * (x)), \
>   							SLOW_CLOCK_FREQ)
>   
> +#define SHDW_CFG_NOT_USED	(32)
> +
>   struct shdwc_config {
>   	u8 wkup_pin_input;
>   	u8 mr_rtcwk_shift;
> +	u8 mr_rttwk_shift;
>   	u8 sr_rtcwk_shift;
> +	u8 sr_rttwk_shift;
>   };
>   
>   struct shdwc {
> @@ -104,6 +110,8 @@ static void __init at91_wakeup_status(struct platform_device *pdev)
>   		reason = "WKUP pin";
>   	else if (SHDW_RTCWK(reg, shdw->cfg))
>   		reason = "RTC";
> +	else if (SHDW_RTTWK(reg, shdw->cfg))
> +		reason = "RTT";
>   
>   	pr_info("AT91: Wake-Up source: %s\n", reason);
>   }
> @@ -221,6 +229,9 @@ static void at91_shdwc_dt_configure(struct platform_device *pdev)
>   	if (of_property_read_bool(np, "atmel,wakeup-rtc-timer"))
>   		mode |= SHDW_RTCWKEN(shdw->cfg);
>   
> +	if (of_property_read_bool(np, "atmel,wakeup-rtt-timer"))
> +		mode |= SHDW_RTTWKEN(shdw->cfg);
> +
>   	dev_dbg(&pdev->dev, "%s: mode = %#x\n", __func__, mode);
>   	writel(mode, shdw->shdwc_base + AT91_SHDW_MR);
>   
> @@ -231,7 +242,10 @@ static void at91_shdwc_dt_configure(struct platform_device *pdev)
>   static const struct shdwc_config sama5d2_shdwc_config = {
>   	.wkup_pin_input = 0,
>   	.mr_rtcwk_shift = 17,
> +	.mr_rttwk_shift	= SHDW_CFG_NOT_USED,
>   	.sr_rtcwk_shift = 5,
> +	.sr_rttwk_shift = SHDW_CFG_NOT_USED,
> +};
>   };
>   
>   static const struct of_device_id at91_shdwc_of_match[] = {
> 


-- 
Nicolas Ferre

  reply	other threads:[~2019-02-18 10:59 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-14 11:24 [PATCH 0/3] add support for SAM9X60's shutdown controller Claudiu.Beznea
2019-02-14 11:24 ` [PATCH 1/3] power: reset: at91-poweroff: add RTT wakeup capability Claudiu.Beznea
2019-02-18 10:59   ` Nicolas.Ferre [this message]
2019-02-14 11:24 ` [PATCH 2/3] power: reset: at91-poweroff: add support for SAM9X60 Claudiu.Beznea
2019-02-18 10:59   ` Nicolas.Ferre
2019-02-14 11:24 ` [PATCH 3/3] dt-bindings: arm: atmel: add binding for SAM9X60 shutdown controller Claudiu.Beznea
2019-02-18 11:01   ` Nicolas.Ferre
2019-02-18 14:47     ` Claudiu.Beznea

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=10737217-cbf5-765c-7bad-2d9f4b038f28@microchip.com \
    --to=nicolas.ferre@microchip.com \
    --cc=Claudiu.Beznea@microchip.com \
    --cc=Ludovic.Desroches@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sre@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®