From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S265947AbUAUMxd (ORCPT ); Wed, 21 Jan 2004 07:53:33 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S265945AbUAUMxd (ORCPT ); Wed, 21 Jan 2004 07:53:33 -0500 Received: from gstserv.netnea.com ([213.200.225.210]:60006 "EHLO james.netnea.com") by vger.kernel.org with ESMTP id S265947AbUAUMwj (ORCPT ); Wed, 21 Jan 2004 07:52:39 -0500 Subject: Re: Problem: 2.6.1-mm4/5 ACPI ut_allocate error on Dell Inspiron 8200 From: Charles Bueche To: Chris Scheib Cc: linux-kernel@vger.kernel.org In-Reply-To: <400D7459.8000300@chartermi.net> References: <400D7459.8000300@chartermi.net> Content-Type: text/plain Message-Id: <1074685498.7845.8.camel@bluez.bueche.ch> Mime-Version: 1.0 X-Mailer: Ximian Evolution 1.4.5 Date: Wed, 21 Jan 2004 12:44:58 +0100 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi, same error here with Dell I8600 and kernel 2.6.1-gentoo. The error message are : ----------------------- Jan 21 12:38:15 bluez kernel: ACPI-0279: *** Error: Looking up [BST0] in namespace, AE_ALREADY_EXISTS Jan 21 12:38:15 bluez kernel: ACPI-1120: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node f7fe4a60), AE_ALREADY_EXISTS Jan 21 12:38:15 bluez kernel: -0091: *** Error: ut_allocate: Attempt to allocate zero bytes Jan 21 12:38:15 bluez last message repeated 3 times Jan 21 12:38:15 bluez kernel: ACPI-0279: *** Error: Looking up [BST0] in namespace, AE_ALREADY_EXISTS Jan 21 12:38:15 bluez kernel: ACPI-1120: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node f7fe4a60), AE_ALREADY_EXISTS Jan 21 12:38:15 bluez kernel: -0091: *** Error: ut_allocate: Attempt to allocate zero bytes Jan 21 12:38:15 bluez last message repeated 3 times ------------------------- sometimes, the ut_allocate error comes 7 times instead of 3. The error existed since I use 2.6test on this laptop, but what was new with 2.6.1 is the inability to read the battery status from /proc/acpi/battery/BAT0/*. I think I might have read that a patch exist, but I'm waiting for 2.6.2 to try again. Getting a proper ACPI suspend on this hardware would be good as well, but I think Dell bioses are just too broken to have any hope for this feature. Charles On Tue, 2004-01-20 at 19:32, Chris Scheib wrote: > I recently noticed a problem with ACPI when I patched my kernel to > -mm4 or -mm5. Upon initialization of ACPI, I repeatedly get the error > "-0091: *** Error: ut_allocate: Attempt to allocate zero bytes". After > the kernel is loaded, I am not able to retrieve any battery stats. When > I try to look at the battery stats, it repeats the ut_allocate error > again. After googling, I discovered that turning on Relaxed AML > Checking might fix this. After a recompile, I found out it didn't. I > have had no problems with ACPI up until -mm4 and -mm5, vanilla 2.6.1 and > under work fine. > > Please include me in any replies, as I am not subscribed to LKML > (although I do read the archives @MARC). If you need more information > about my hardware, or output from any commands, just ask. > > Thanks, > Christopher J. Scheib > schweeb@chartermi.net > > System Info: > > Dell Inspiron 8200 > 1.7Ghz P4-M > 640Mb SO-DIMM DDR RAM > NVIDIA GeForce4 440-Go 64Mb > 40Gb HDD > Debian Sid > > > Here's dmesg output, with a few events surrounding what occurred: > > USB Mass Storage support registered. > XFS mounting filesystem hda2 > Ending clean XFS mount for filesystem: hda2 > XFS mounting filesystem hda6 > Ending clean XFS mount for filesystem: hda6 > ACPI: AC Adapter [AC] (on-line) > ACPI: Battery Slot [BAT0] (battery present) > -0091: *** Error: ut_allocate: Attempt to allocate zero bytes > -0091: *** Error: ut_allocate: Attempt to allocate zero bytes > -0091: *** Error: ut_allocate: Attempt to allocate zero bytes > -0091: *** Error: ut_allocate: Attempt to allocate zero bytes > ACPI: Battery Slot [BAT1] (battery present) > ACPI: Lid Switch [LID] > ACPI: Power Button (CM) [PBTN] > ACPI: Sleep Button (CM) [SBTN] > ACPI: Processor [CPU0] (supports C1 C2, 8 throttling states) > ACPI: Thermal Zone [THM] (25 C) > PCI: Setting latency timer of device 0000:00:1f.5 to 64 > MC'97 1 converters and GPIO not ready (0xff00) > > Here is my kernel .config: > > # > # Automatically generated make config: don't edit > # > CONFIG_X86=y > CONFIG_MMU=y > CONFIG_UID16=y > CONFIG_GENERIC_ISA_DMA=y > > # > # Code maturity level options > # > CONFIG_EXPERIMENTAL=y > CONFIG_CLEAN_COMPILE=y > CONFIG_STANDALONE=y > CONFIG_BROKEN_ON_SMP=y > > # > # General setup > # > CONFIG_SWAP=y > CONFIG_SYSVIPC=y > CONFIG_BSD_PROCESS_ACCT=y > CONFIG_SYSCTL=y > CONFIG_LOG_BUF_SHIFT=14 > CONFIG_IKCONFIG=y > CONFIG_IKCONFIG_PROC=y > # CONFIG_EMBEDDED is not set > CONFIG_KALLSYMS=y > CONFIG_FUTEX=y > CONFIG_EPOLL=y > CONFIG_IOSCHED_NOOP=y > CONFIG_IOSCHED_AS=y > CONFIG_IOSCHED_DEADLINE=y > CONFIG_IOSCHED_CFQ=y > # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set > > # > # Loadable module support > # > CONFIG_MODULES=y > CONFIG_MODULE_UNLOAD=y > # CONFIG_MODULE_FORCE_UNLOAD is not set > CONFIG_OBSOLETE_MODPARM=y > # CONFIG_MODVERSIONS is not set > CONFIG_KMOD=y > > # > # Processor type and features > # > CONFIG_X86_PC=y > # CONFIG_X86_ELAN is not set > # CONFIG_X86_VOYAGER is not set > # CONFIG_X86_NUMAQ is not set > # CONFIG_X86_SUMMIT is not set > # CONFIG_X86_BIGSMP is not set > # CONFIG_X86_VISWS is not set > # CONFIG_X86_GENERICARCH is not set > # CONFIG_X86_ES7000 is not set > > # > # Processor support > # > > # > # Select all processors your kernel should support > # > # CONFIG_CPU_386 is not set > # CONFIG_CPU_486 is not set > # CONFIG_CPU_586 is not set > # CONFIG_CPU_586TSC is not set > # CONFIG_CPU_586MMX is not set > # CONFIG_CPU_686 is not set > # CONFIG_CPU_PENTIUMII is not set > # CONFIG_CPU_PENTIUMIII is not set > # CONFIG_CPU_PENTIUMM is not set > CONFIG_CPU_PENTIUM4=y > # CONFIG_CPU_K6 is not set > # CONFIG_CPU_K7 is not set > # CONFIG_CPU_K8 is not set > # CONFIG_CPU_CRUSOE is not set > # CONFIG_CPU_WINCHIPC6 is not set > # CONFIG_CPU_WINCHIP2 is not set > # CONFIG_CPU_WINCHIP3D is not set > # CONFIG_CPU_CYRIXIII is not set > # CONFIG_CPU_VIAC3_2 is not set > CONFIG_CPU_INTEL=y > CONFIG_X86_CMPXCHG=y > CONFIG_X86_XADD=y > CONFIG_X86_L1_CACHE_SHIFT=7 > CONFIG_RWSEM_XCHGADD_ALGORITHM=y > CONFIG_X86_WP_WORKS_OK=y > CONFIG_X86_INVLPG=y > CONFIG_X86_BSWAP=y > CONFIG_X86_POPAD_OK=y > CONFIG_X86_INTEL_USERCOPY=y > CONFIG_X86_USE_PPRO_CHECKSUM=y > # CONFIG_X86_4G is not set > # CONFIG_X86_SWITCH_PAGETABLES is not set > # CONFIG_X86_4G_VM_LAYOUT is not set > # CONFIG_X86_UACCESS_INDIRECT is not set > # CONFIG_X86_HIGH_ENTRY is not set > CONFIG_HPET_TIMER=y > CONFIG_HPET_EMULATE_RTC=y > # CONFIG_SMP is not set > CONFIG_PREEMPT=y > CONFIG_X86_UP_APIC=y > CONFIG_X86_UP_IOAPIC=y > CONFIG_X86_LOCAL_APIC=y > CONFIG_X86_IO_APIC=y > CONFIG_X86_TSC=y > CONFIG_X86_MCE=y > CONFIG_X86_MCE_NONFATAL=y > CONFIG_X86_MCE_P4THERMAL=y > # CONFIG_TOSHIBA is not set > CONFIG_I8K=m > CONFIG_MICROCODE=m > # CONFIG_X86_MSR is not set > CONFIG_X86_CPUID=m > # CONFIG_EDD is not set > CONFIG_NOHIGHMEM=y > # CONFIG_HIGHMEM4G is not set > # CONFIG_HIGHMEM64G is not set > # CONFIG_MATH_EMULATION is not set > CONFIG_MTRR=y > # CONFIG_EFI is not set > CONFIG_HAVE_DEC_LOCK=y > # CONFIG_REGPARM is not set > > # > # Power management options (ACPI, APM) > # > CONFIG_PM=y > CONFIG_SOFTWARE_SUSPEND=y > # CONFIG_PM_DISK is not set > > # > # ACPI (Advanced Configuration and Power Interface) Support > # > CONFIG_ACPI=y > CONFIG_ACPI_BOOT=y > CONFIG_ACPI_INTERPRETER=y > # CONFIG_ACPI_SLEEP is not set > CONFIG_ACPI_AC=m > CONFIG_ACPI_BATTERY=m > CONFIG_ACPI_BUTTON=m > CONFIG_ACPI_FAN=m > CONFIG_ACPI_PROCESSOR=m > CONFIG_ACPI_THERMAL=m > # CONFIG_ACPI_ASUS is not set > # CONFIG_ACPI_TOSHIBA is not set > # CONFIG_ACPI_DEBUG is not set > CONFIG_ACPI_BUS=y > CONFIG_ACPI_EC=y > CONFIG_ACPI_POWER=y > CONFIG_ACPI_PCI=y > CONFIG_ACPI_SYSTEM=y > CONFIG_ACPI_RELAXED_AML=y > CONFIG_X86_PM_TIMER=y > > # > # APM (Advanced Power Management) BIOS Support > # > # CONFIG_APM is not set > > # > # CPU Frequency scaling > # > CONFIG_CPU_FREQ=y > CONFIG_CPU_FREQ_PROC_INTF=m > CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y > # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set > CONFIG_CPU_FREQ_GOV_PERFORMANCE=y > CONFIG_CPU_FREQ_GOV_POWERSAVE=y > CONFIG_CPU_FREQ_GOV_USERSPACE=m > CONFIG_CPU_FREQ_24_API=y > CONFIG_CPU_FREQ_TABLE=y > > # > # CPUFreq processor drivers > # > CONFIG_X86_ACPI_CPUFREQ=m > # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set > # CONFIG_X86_POWERNOW_K6 is not set > # CONFIG_X86_POWERNOW_K7 is not set > # CONFIG_X86_POWERNOW_K8 is not set > # CONFIG_X86_GX_SUSPMOD is not set > # CONFIG_X86_SPEEDSTEP_CENTRINO is not set > CONFIG_X86_SPEEDSTEP_ICH=y > # CONFIG_X86_SPEEDSTEP_SMI is not set > # CONFIG_X86_P4_CLOCKMOD is not set > CONFIG_X86_SPEEDSTEP_LIB=y > # CONFIG_X86_LONGRUN is not set > # CONFIG_X86_LONGHAUL is not set > > # > # Bus options (PCI, PCMCIA, EISA, MCA, ISA) > # > CONFIG_PCI=y > # CONFIG_PCI_GOBIOS is not set > # CONFIG_PCI_GODIRECT is not set > CONFIG_PCI_GOANY=y > CONFIG_PCI_BIOS=y > CONFIG_PCI_DIRECT=y > # CONFIG_PCI_USE_VECTOR is not set > # CONFIG_PCI_LEGACY_PROC is not set > CONFIG_PCI_NAMES=y > CONFIG_ISA=y > # CONFIG_EISA is not set > # CONFIG_MCA is not set > # CONFIG_SCx200 is not set > CONFIG_HOTPLUG=y > > # > # PCMCIA/CardBus support > # > CONFIG_PCMCIA=m > # CONFIG_PCMCIA_COMPAT is not set > CONFIG_YENTA=m > CONFIG_CARDBUS=y > # CONFIG_I82092 is not set > # CONFIG_I82365 is not set > # CONFIG_TCIC is not set > CONFIG_PCMCIA_PROBE=y > > # > # PCI Hotplug Support > # > # CONFIG_HOTPLUG_PCI is not set > > # > # Executable file formats > # > CONFIG_BINFMT_ELF=y > CONFIG_BINFMT_AOUT=m > CONFIG_BINFMT_MISC=m > > # > # Device Drivers > # > > # > # Generic Driver Options > # > CONFIG_FW_LOADER=y > > # > # Memory Technology Devices (MTD) > # > # CONFIG_MTD is not set > > # > # Parallel port support > # > # CONFIG_PARPORT is not set > > # > # Plug and Play support > # > CONFIG_PNP=y > # CONFIG_PNP_DEBUG is not set > > # > # Protocols > # > # CONFIG_ISAPNP is not set > CONFIG_PNPBIOS=y > # CONFIG_PNPBIOS_PROC_FS is not set > > # > # Block devices > # > CONFIG_BLK_DEV_FD=m > # CONFIG_BLK_DEV_XD is not set > # CONFIG_BLK_CPQ_DA is not set > # CONFIG_BLK_CPQ_CISS_DA is not set > # CONFIG_BLK_DEV_DAC960 is not set > # CONFIG_BLK_DEV_UMEM is not set > CONFIG_BLK_DEV_LOOP=y > # CONFIG_BLK_DEV_CRYPTOLOOP is not set > CONFIG_BLK_DEV_NBD=m > CONFIG_BLK_DEV_RAM=m > CONFIG_BLK_DEV_RAM_SIZE=4096 > # CONFIG_BLK_DEV_INITRD is not set > # CONFIG_LBD is not set > > # > # ATA/ATAPI/MFM/RLL support > # > CONFIG_IDE=y > CONFIG_BLK_DEV_IDE=y > > # > # Please see Documentation/ide.txt for help/info on IDE drives > # > # CONFIG_BLK_DEV_HD_IDE is not set > CONFIG_BLK_DEV_IDEDISK=y > # CONFIG_IDEDISK_MULTI_MODE is not set > # CONFIG_IDEDISK_STROKE is not set > # CONFIG_BLK_DEV_IDECS is not set > CONFIG_BLK_DEV_IDECD=m > # CONFIG_BLK_DEV_IDETAPE is not set > # CONFIG_BLK_DEV_IDEFLOPPY is not set > # CONFIG_BLK_DEV_IDESCSI is not set > # CONFIG_IDE_TASK_IOCTL is not set > # CONFIG_IDE_TASKFILE_IO is not set > > # > # IDE chipset support/bugfixes > # > CONFIG_IDE_GENERIC=y > # CONFIG_BLK_DEV_CMD640 is not set > # CONFIG_BLK_DEV_IDEPNP is not set > CONFIG_BLK_DEV_IDEPCI=y > CONFIG_IDEPCI_SHARE_IRQ=y > # CONFIG_BLK_DEV_OFFBOARD is not set > # CONFIG_BLK_DEV_GENERIC is not set > # CONFIG_BLK_DEV_OPTI621 is not set > # CONFIG_BLK_DEV_RZ1000 is not set > CONFIG_BLK_DEV_IDEDMA_PCI=y > # CONFIG_BLK_DEV_IDEDMA_FORCED is not set > CONFIG_IDEDMA_PCI_AUTO=y > # CONFIG_IDEDMA_ONLYDISK is not set > # CONFIG_IDEDMA_PCI_WIP is not set > CONFIG_BLK_DEV_ADMA=y > # CONFIG_BLK_DEV_AEC62XX is not set > # CONFIG_BLK_DEV_ALI15X3 is not set > # CONFIG_BLK_DEV_AMD74XX is not set > # CONFIG_BLK_DEV_CMD64X is not set > # CONFIG_BLK_DEV_TRIFLEX is not set > # CONFIG_BLK_DEV_CY82C693 is not set > # CONFIG_BLK_DEV_CS5520 is not set > # CONFIG_BLK_DEV_CS5530 is not set > # CONFIG_BLK_DEV_HPT34X is not set > # CONFIG_BLK_DEV_HPT366 is not set > # CONFIG_BLK_DEV_SC1200 is not set > CONFIG_BLK_DEV_PIIX=y > # CONFIG_BLK_DEV_NS87415 is not set > # CONFIG_BLK_DEV_PDC202XX_OLD is not set > # CONFIG_BLK_DEV_PDC202XX_NEW is not set > # CONFIG_BLK_DEV_SVWKS is not set > # CONFIG_BLK_DEV_SIIMAGE is not set > # CONFIG_BLK_DEV_SIS5513 is not set > # CONFIG_BLK_DEV_SLC90E66 is not set > # CONFIG_BLK_DEV_TRM290 is not set > # CONFIG_BLK_DEV_VIA82CXXX is not set > # CONFIG_IDE_CHIPSETS is not set > CONFIG_BLK_DEV_IDEDMA=y > # CONFIG_IDEDMA_IVB is not set > CONFIG_IDEDMA_AUTO=y > # CONFIG_DMA_NONPCI is not set > # CONFIG_BLK_DEV_HD is not set > > # > # SCSI device support > # > CONFIG_SCSI=y > CONFIG_SCSI_PROC_FS=y > > # > # SCSI support type (disk, tape, CD-ROM) > # > CONFIG_BLK_DEV_SD=m > CONFIG_MAX_SD_DISKS=256 > # CONFIG_CHR_DEV_ST is not set > # CONFIG_CHR_DEV_OSST is not set > CONFIG_BLK_DEV_SR=m > # CONFIG_BLK_DEV_SR_VENDOR is not set > CONFIG_CHR_DEV_SG=m > > # > # Some SCSI devices (e.g. CD jukebox) support multiple LUNs > # > # CONFIG_SCSI_MULTI_LUN is not set > # CONFIG_SCSI_REPORT_LUNS is not set > # CONFIG_SCSI_CONSTANTS is not set > # CONFIG_SCSI_LOGGING is not set > > # > # SCSI low-level drivers > # > # CONFIG_BLK_DEV_3W_XXXX_RAID is not set > # CONFIG_SCSI_7000FASST is not set > # CONFIG_SCSI_ACARD is not set > # CONFIG_SCSI_AHA152X is not set > # CONFIG_SCSI_AHA1542 is not set > # CONFIG_SCSI_AACRAID is not set > # CONFIG_SCSI_AIC7XXX is not set > # CONFIG_SCSI_AIC7XXX_OLD is not set > # CONFIG_SCSI_AIC79XX is not set > # CONFIG_SCSI_ADVANSYS is not set > # CONFIG_SCSI_IN2000 is not set > # CONFIG_SCSI_MEGARAID is not set > # CONFIG_SCSI_SATA is not set > # CONFIG_SCSI_BUSLOGIC is not set > # CONFIG_SCSI_CPQFCTS is not set > # CONFIG_SCSI_DMX3191D is not set > # CONFIG_SCSI_DTC3280 is not set > # CONFIG_SCSI_EATA is not set > # CONFIG_SCSI_EATA_PIO is not set > # CONFIG_SCSI_FUTURE_DOMAIN is not set > # CONFIG_SCSI_GDTH is not set > # CONFIG_SCSI_GENERIC_NCR5380 is not set > # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set > # CONFIG_SCSI_IPS is not set > # CONFIG_SCSI_INIA100 is not set > # CONFIG_SCSI_NCR53C406A is not set > # CONFIG_SCSI_SYM53C8XX_2 is not set > # CONFIG_SCSI_PAS16 is not set > # CONFIG_SCSI_PSI240I is not set > # CONFIG_SCSI_QLOGIC_FAS is not set > # CONFIG_SCSI_QLOGIC_ISP is not set > # CONFIG_SCSI_QLOGIC_FC is not set > # CONFIG_SCSI_QLOGIC_1280 is not set > CONFIG_SCSI_QLA2XXX_CONFIG=y > # CONFIG_SCSI_QLA21XX is not set > # CONFIG_SCSI_QLA22XX is not set > # CONFIG_SCSI_QLA23XX is not set > # CONFIG_SCSI_SYM53C416 is not set > # CONFIG_SCSI_DC395x is not set > # CONFIG_SCSI_DC390T is not set > # CONFIG_SCSI_T128 is not set > # CONFIG_SCSI_U14_34F is not set > # CONFIG_SCSI_ULTRASTOR is not set > # CONFIG_SCSI_NSP32 is not set > # CONFIG_SCSI_DEBUG is not set > > # > # PCMCIA SCSI adapter support > # > # CONFIG_PCMCIA_AHA152X is not set > # CONFIG_PCMCIA_FDOMAIN is not set > # CONFIG_PCMCIA_NINJA_SCSI is not set > # CONFIG_PCMCIA_QLOGIC is not set > > # > # Old CD-ROM drivers (not SCSI, not IDE) > # > # CONFIG_CD_NO_IDESCSI is not set > > # > # Multi-device support (RAID and LVM) > # > # CONFIG_MD is not set > > # > # Fusion MPT device support > # > # CONFIG_FUSION is not set > > # > # IEEE 1394 (FireWire) support (EXPERIMENTAL) > # > CONFIG_IEEE1394=m > > # > # Subsystem Options > # > # CONFIG_IEEE1394_VERBOSEDEBUG is not set > # CONFIG_IEEE1394_OUI_DB is not set > > # > # Device Drivers > # > > # > # Texas Instruments PCILynx requires I2C > # > CONFIG_IEEE1394_OHCI1394=m > > # > # Protocol Drivers > # > CONFIG_IEEE1394_VIDEO1394=m > CONFIG_IEEE1394_SBP2=m > CONFIG_IEEE1394_SBP2_PHYS_DMA=y > CONFIG_IEEE1394_ETH1394=m > CONFIG_IEEE1394_DV1394=m > CONFIG_IEEE1394_RAWIO=m > CONFIG_IEEE1394_CMP=m > CONFIG_IEEE1394_AMDTP=m > > # > # I2O device support > # > # CONFIG_I2O is not set > > # > # Networking support > # > CONFIG_NET=y > > # > # Networking options > # > CONFIG_PACKET=y > # CONFIG_PACKET_MMAP is not set > CONFIG_NETLINK_DEV=m > CONFIG_UNIX=y > # CONFIG_NET_KEY is not set > CONFIG_INET=y > CONFIG_IP_MULTICAST=y > # CONFIG_IP_ADVANCED_ROUTER is not set > # CONFIG_IP_PNP is not set > CONFIG_NET_IPIP=m > CONFIG_NET_IPGRE=m > # CONFIG_NET_IPGRE_BROADCAST is not set > # CONFIG_IP_MROUTE is not set > # CONFIG_ARPD is not set > # CONFIG_INET_ECN is not set > CONFIG_SYN_COOKIES=y > # CONFIG_INET_AH is not set > # CONFIG_INET_ESP is not set > # CONFIG_INET_IPCOMP is not set > > # > # IP: Virtual Server Configuration > # > # CONFIG_IP_VS is not set > # CONFIG_IPV6 is not set > # CONFIG_DECNET is not set > # CONFIG_BRIDGE is not set > CONFIG_NETFILTER=y > # CONFIG_NETFILTER_DEBUG is not set > > # > # IP: Netfilter Configuration > # > CONFIG_IP_NF_CONNTRACK=m > CONFIG_IP_NF_FTP=m > CONFIG_IP_NF_IRC=m > # CONFIG_IP_NF_TFTP is not set > # CONFIG_IP_NF_AMANDA is not set > CONFIG_IP_NF_QUEUE=m > CONFIG_IP_NF_IPTABLES=m > CONFIG_IP_NF_MATCH_LIMIT=m > # CONFIG_IP_NF_MATCH_IPRANGE is not set > CONFIG_IP_NF_MATCH_MAC=m > CONFIG_IP_NF_MATCH_PKTTYPE=m > CONFIG_IP_NF_MATCH_MARK=m > CONFIG_IP_NF_MATCH_MULTIPORT=m > CONFIG_IP_NF_MATCH_TOS=m > # CONFIG_IP_NF_MATCH_RECENT is not set > CONFIG_IP_NF_MATCH_ECN=m > CONFIG_IP_NF_MATCH_DSCP=m > # CONFIG_IP_NF_MATCH_AH_ESP is not set > CONFIG_IP_NF_MATCH_LENGTH=m > CONFIG_IP_NF_MATCH_TTL=m > CONFIG_IP_NF_MATCH_TCPMSS=m > CONFIG_IP_NF_MATCH_HELPER=m > CONFIG_IP_NF_MATCH_STATE=m > CONFIG_IP_NF_MATCH_CONNTRACK=m > CONFIG_IP_NF_MATCH_OWNER=m > CONFIG_IP_NF_FILTER=m > CONFIG_IP_NF_TARGET_REJECT=m > CONFIG_IP_NF_NAT=m > CONFIG_IP_NF_NAT_NEEDED=y > CONFIG_IP_NF_TARGET_MASQUERADE=m > CONFIG_IP_NF_TARGET_REDIRECT=m > CONFIG_IP_NF_TARGET_NETMAP=m > # CONFIG_IP_NF_TARGET_SAME is not set > # CONFIG_IP_NF_NAT_LOCAL is not set > CONFIG_IP_NF_NAT_SNMP_BASIC=m > CONFIG_IP_NF_NAT_IRC=m > CONFIG_IP_NF_NAT_FTP=m > CONFIG_IP_NF_MANGLE=m > CONFIG_IP_NF_TARGET_TOS=m > CONFIG_IP_NF_TARGET_ECN=m > CONFIG_IP_NF_TARGET_DSCP=m > CONFIG_IP_NF_TARGET_MARK=m > CONFIG_IP_NF_TARGET_CLASSIFY=m > CONFIG_IP_NF_TARGET_LOG=m > # CONFIG_IP_NF_TARGET_ULOG is not set > CONFIG_IP_NF_TARGET_TCPMSS=m > CONFIG_IP_NF_ARPTABLES=m > CONFIG_IP_NF_ARPFILTER=m > # CONFIG_IP_NF_ARP_MANGLE is not set > CONFIG_IP_NF_COMPAT_IPCHAINS=m > CONFIG_IP_NF_COMPAT_IPFWADM=m > CONFIG_XFRM=y > # CONFIG_XFRM_USER is not set > > # > # SCTP Configuration (EXPERIMENTAL) > # > CONFIG_IPV6_SCTP__=y > # CONFIG_IP_SCTP is not set > # CONFIG_ATM is not set > # CONFIG_VLAN_8021Q is not set > # CONFIG_LLC2 is not set > # CONFIG_IPX is not set > # CONFIG_ATALK is not set > # CONFIG_X25 is not set > # CONFIG_LAPB is not set > # CONFIG_NET_DIVERT is not set > # CONFIG_ECONET is not set > # CONFIG_WAN_ROUTER is not set > # CONFIG_NET_FASTROUTE is not set > # CONFIG_NET_HW_FLOWCONTROL is not set > > # > # QoS and/or fair queueing > # > # CONFIG_NET_SCHED is not set > > # > # Network testing > # > # CONFIG_NET_PKTGEN is not set > CONFIG_NETDEVICES=y > > # > # ARCnet devices > # > # CONFIG_ARCNET is not set > # CONFIG_DUMMY is not set > # CONFIG_BONDING is not set > # CONFIG_EQUALIZER is not set > CONFIG_TUN=m > # CONFIG_ETHERTAP is not set > # CONFIG_NET_SB1000 is not set > > # > # Ethernet (10 or 100Mbit) > # > CONFIG_NET_ETHERNET=y > CONFIG_MII=m > # CONFIG_HAPPYMEAL is not set > # CONFIG_SUNGEM is not set > CONFIG_NET_VENDOR_3COM=y > # CONFIG_EL1 is not set > # CONFIG_EL2 is not set > # CONFIG_ELPLUS is not set > # CONFIG_EL16 is not set > # CONFIG_EL3 is not set > # CONFIG_3C515 is not set > CONFIG_VORTEX=m > # CONFIG_TYPHOON is not set > # CONFIG_LANCE is not set > # CONFIG_NET_VENDOR_SMC is not set > # CONFIG_NET_VENDOR_RACAL is not set > > # > # Tulip family network device support > # > # CONFIG_NET_TULIP is not set > # CONFIG_AT1700 is not set > # CONFIG_DEPCA is not set > # CONFIG_HP100 is not set > # CONFIG_NET_ISA is not set > # CONFIG_NET_PCI is not set > # CONFIG_NET_POCKET is not set > > # > # Ethernet (1000 Mbit) > # > # CONFIG_ACENIC is not set > # CONFIG_DL2K is not set > # CONFIG_E1000 is not set > # CONFIG_NS83820 is not set > # CONFIG_HAMACHI is not set > # CONFIG_YELLOWFIN is not set > # CONFIG_R8169 is not set > # CONFIG_SIS190 is not set > # CONFIG_SK98LIN is not set > # CONFIG_TIGON3 is not set > > # > # Ethernet (10000 Mbit) > # > # CONFIG_IXGB is not set > # CONFIG_FDDI is not set > # CONFIG_HIPPI is not set > # CONFIG_PPP is not set > # CONFIG_SLIP is not set > > # > # Wireless LAN (non-hamradio) > # > CONFIG_NET_RADIO=y > > # > # Obsolete Wireless cards support (pre-802.11) > # > # CONFIG_STRIP is not set > # CONFIG_ARLAN is not set > # CONFIG_WAVELAN is not set > # CONFIG_PCMCIA_WAVELAN is not set > # CONFIG_PCMCIA_NETWAVE is not set > > # > # Wireless 802.11 Frequency Hopping cards support > # > # CONFIG_PCMCIA_RAYCS is not set > > # > # Wireless 802.11b ISA/PCI cards support > # > # CONFIG_AIRO is not set > CONFIG_HERMES=m > # CONFIG_PLX_HERMES is not set > # CONFIG_TMD_HERMES is not set > # CONFIG_PCI_HERMES is not set > > # > # Wireless 802.11b Pcmcia/Cardbus cards support > # > CONFIG_PCMCIA_HERMES=m > # CONFIG_AIRO_CS is not set > CONFIG_PCMCIA_ATMEL=m > # CONFIG_PCMCIA_WL3501 is not set > CONFIG_NET_WIRELESS=y > > # > # Token Ring devices > # > # CONFIG_TR is not set > # CONFIG_NET_FC is not set > # CONFIG_RCPCI is not set > # CONFIG_SHAPER is not set > # CONFIG_NETCONSOLE is not set > > # > # Wan interfaces > # > # CONFIG_WAN is not set > > # > # PCMCIA network device support > # > # CONFIG_NET_PCMCIA is not set > > # > # Amateur Radio support > # > # CONFIG_HAMRADIO is not set > > # > # IrDA (infrared) support > # > # CONFIG_IRDA is not set > > # > # Bluetooth support > # > # CONFIG_BT is not set > # CONFIG_KGDBOE is not set > # CONFIG_NETPOLL is not set > # CONFIG_NETPOLL_RX is not set > # CONFIG_NETPOLL_TRAP is not set > # CONFIG_NET_POLL_CONTROLLER is not set > > # > # ISDN subsystem > # > # CONFIG_ISDN_BOOL is not set > > # > # Telephony Support > # > # CONFIG_PHONE is not set > > # > # Input device support > # > CONFIG_INPUT=y > > # > # Userland interfaces > # > CONFIG_INPUT_MOUSEDEV=y > CONFIG_INPUT_MOUSEDEV_PSAUX=y > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 > # CONFIG_INPUT_JOYDEV is not set > # CONFIG_INPUT_TSDEV is not set > CONFIG_INPUT_EVDEV=m > # CONFIG_INPUT_EVBUG is not set > > # > # Input I/O drivers > # > # CONFIG_GAMEPORT is not set > CONFIG_SOUND_GAMEPORT=y > CONFIG_SERIO=y > CONFIG_SERIO_I8042=y > CONFIG_SERIO_SERPORT=y > # CONFIG_SERIO_CT82C710 is not set > # CONFIG_SERIO_PCIPS2 is not set > > # > # Input Device Drivers > # > CONFIG_INPUT_KEYBOARD=y > CONFIG_KEYBOARD_ATKBD=y > # CONFIG_KEYBOARD_SUNKBD is not set > # CONFIG_KEYBOARD_XTKBD is not set > # CONFIG_KEYBOARD_NEWTON is not set > CONFIG_INPUT_MOUSE=y > CONFIG_MOUSE_PS2=m > # CONFIG_MOUSE_SERIAL is not set > # CONFIG_MOUSE_INPORT is not set > # CONFIG_MOUSE_LOGIBM is not set > # CONFIG_MOUSE_PC110PAD is not set > # CONFIG_INPUT_JOYSTICK is not set > # CONFIG_INPUT_TOUCHSCREEN is not set > # CONFIG_INPUT_MISC is not set > > # > # Character devices > # > CONFIG_VT=y > CONFIG_VT_CONSOLE=y > CONFIG_HW_CONSOLE=y > # CONFIG_SERIAL_NONSTANDARD is not set > > # > # Serial drivers > # > CONFIG_SERIAL_8250=m > # CONFIG_SERIAL_8250_CS is not set > # CONFIG_SERIAL_8250_ACPI is not set > CONFIG_SERIAL_8250_NR_UARTS=4 > # CONFIG_SERIAL_8250_EXTENDED is not set > > # > # Non-8250 serial port support > # > CONFIG_SERIAL_CORE=m > CONFIG_UNIX98_PTYS=y > CONFIG_UNIX98_PTY_COUNT=256 > > # > # Mice > # > # CONFIG_BUSMOUSE is not set > # CONFIG_QIC02_TAPE is not set > > # > # IPMI > # > # CONFIG_IPMI_HANDLER is not set > > # > # Watchdog Cards > # > # CONFIG_WATCHDOG is not set > # CONFIG_HW_RANDOM is not set > CONFIG_NVRAM=m > CONFIG_RTC=y > # CONFIG_DTLK is not set > # CONFIG_R3964 is not set > # CONFIG_APPLICOM is not set > # CONFIG_SONYPI is not set > > # > # Ftape, the floppy tape device driver > # > # CONFIG_FTAPE is not set > CONFIG_AGP=m > # CONFIG_AGP_ALI is not set > # CONFIG_AGP_ATI is not set > # CONFIG_AGP_AMD is not set > # CONFIG_AGP_AMD64 is not set > # CONFIG_AGP_INTEL is not set > # CONFIG_AGP_NVIDIA is not set > # CONFIG_AGP_SIS is not set > # CONFIG_AGP_SWORKS is not set > # CONFIG_AGP_VIA is not set > # CONFIG_DRM is not set > > # > # PCMCIA character devices > # > # CONFIG_SYNCLINK_CS is not set > # CONFIG_MWAVE is not set > # CONFIG_RAW_DRIVER is not set > # CONFIG_HANGCHECK_TIMER is not set > > # > # I2C support > # > # CONFIG_I2C is not set > > # > # Multimedia devices > # > # CONFIG_VIDEO_DEV is not set > > # > # Digital Video Broadcasting Devices > # > # CONFIG_DVB is not set > > # > # Graphics support > # > CONFIG_FB=y > # CONFIG_FB_CYBER2000 is not set > # CONFIG_FB_IMSTT is not set > # CONFIG_FB_VGA16 is not set > CONFIG_FB_VESA=y > CONFIG_VIDEO_SELECT=y > # CONFIG_FB_HGA is not set > # CONFIG_FB_RIVA is not set > # CONFIG_FB_MATROX is not set > # CONFIG_FB_RADEON is not set > # CONFIG_FB_ATY128 is not set > # CONFIG_FB_ATY is not set > # CONFIG_FB_SIS is not set > # CONFIG_FB_NEOMAGIC is not set > # CONFIG_FB_KYRO is not set > # CONFIG_FB_3DFX is not set > # CONFIG_FB_VOODOO1 is not set > # CONFIG_FB_TRIDENT is not set > # CONFIG_FB_VIRTUAL is not set > > # > # Console display driver support > # > CONFIG_VGA_CONSOLE=y > # CONFIG_MDA_CONSOLE is not set > CONFIG_DUMMY_CONSOLE=y > CONFIG_FRAMEBUFFER_CONSOLE=y > CONFIG_PCI_CONSOLE=y > # CONFIG_FONTS is not set > CONFIG_FONT_8x8=y > CONFIG_FONT_8x16=y > > # > # Logo configuration > # > # CONFIG_LOGO is not set > > # > # Sound > # > CONFIG_SOUND=m > > # > # Advanced Linux Sound Architecture > # > CONFIG_SND=m > CONFIG_SND_SEQUENCER=m > CONFIG_SND_SEQ_DUMMY=m > CONFIG_SND_OSSEMUL=y > CONFIG_SND_MIXER_OSS=m > CONFIG_SND_PCM_OSS=m > CONFIG_SND_SEQUENCER_OSS=y > CONFIG_SND_RTCTIMER=m > # CONFIG_SND_VERBOSE_PRINTK is not set > # CONFIG_SND_DEBUG is not set > > # > # Generic devices > # > CONFIG_SND_DUMMY=m > # CONFIG_SND_VIRMIDI is not set > # CONFIG_SND_MTPAV is not set > # CONFIG_SND_SERIAL_U16550 is not set > # CONFIG_SND_MPU401 is not set > > # > # ISA devices > # > # CONFIG_SND_AD1848 is not set > # CONFIG_SND_CS4231 is not set > # CONFIG_SND_CS4232 is not set > # CONFIG_SND_CS4236 is not set > # CONFIG_SND_ES1688 is not set > # CONFIG_SND_ES18XX is not set > # CONFIG_SND_GUSCLASSIC is not set > # CONFIG_SND_GUSEXTREME is not set > # CONFIG_SND_GUSMAX is not set > # CONFIG_SND_INTERWAVE is not set > # CONFIG_SND_INTERWAVE_STB is not set > # CONFIG_SND_OPTI92X_AD1848 is not set > # CONFIG_SND_OPTI92X_CS4231 is not set > # CONFIG_SND_OPTI93X is not set > # CONFIG_SND_SB8 is not set > # CONFIG_SND_SB16 is not set > # CONFIG_SND_SBAWE is not set > # CONFIG_SND_WAVEFRONT is not set > # CONFIG_SND_CMI8330 is not set > # CONFIG_SND_OPL3SA2 is not set > # CONFIG_SND_SGALAXY is not set > # CONFIG_SND_SSCAPE is not set > > # > # PCI devices > # > # CONFIG_SND_ALI5451 is not set > # CONFIG_SND_AZT3328 is not set > # CONFIG_SND_CS46XX is not set > # CONFIG_SND_CS4281 is not set > # CONFIG_SND_EMU10K1 is not set > # CONFIG_SND_KORG1212 is not set > # CONFIG_SND_NM256 is not set > # CONFIG_SND_RME32 is not set > # CONFIG_SND_RME96 is not set > # CONFIG_SND_RME9652 is not set > # CONFIG_SND_HDSP is not set > # CONFIG_SND_TRIDENT is not set > # CONFIG_SND_YMFPCI is not set > # CONFIG_SND_ALS4000 is not set > # CONFIG_SND_CMIPCI is not set > # CONFIG_SND_ENS1370 is not set > # CONFIG_SND_ENS1371 is not set > # CONFIG_SND_ES1938 is not set > # CONFIG_SND_ES1968 is not set > # CONFIG_SND_MAESTRO3 is not set > # CONFIG_SND_FM801 is not set > # CONFIG_SND_ICE1712 is not set > # CONFIG_SND_ICE1724 is not set > CONFIG_SND_INTEL8X0=m > # CONFIG_SND_SONICVIBES is not set > # CONFIG_SND_VIA82XX is not set > # CONFIG_SND_VX222 is not set > > # > # ALSA USB devices > # > # CONFIG_SND_USB_AUDIO is not set > > # > # PCMCIA devices > # > # CONFIG_SND_VXPOCKET is not set > # CONFIG_SND_VXP440 is not set > > # > # Open Sound System > # > # CONFIG_SOUND_PRIME is not set > > # > # USB support > # > CONFIG_USB=m > # CONFIG_USB_DEBUG is not set > > # > # Miscellaneous USB options > # > CONFIG_USB_DEVICEFS=y > CONFIG_USB_BANDWIDTH=y > # CONFIG_USB_DYNAMIC_MINORS is not set > > # > # USB Host Controller Drivers > # > CONFIG_USB_EHCI_HCD=m > # CONFIG_USB_OHCI_HCD is not set > CONFIG_USB_UHCI_HCD=m > > # > # USB Device Class drivers > # > CONFIG_USB_AUDIO=m > # CONFIG_USB_BLUETOOTH_TTY is not set > CONFIG_USB_MIDI=m > # CONFIG_USB_ACM is not set > CONFIG_USB_PRINTER=m > CONFIG_USB_STORAGE=m > # CONFIG_USB_STORAGE_DEBUG is not set > CONFIG_USB_STORAGE_DATAFAB=y > CONFIG_USB_STORAGE_FREECOM=y > CONFIG_USB_STORAGE_ISD200=y > CONFIG_USB_STORAGE_DPCM=y > CONFIG_USB_STORAGE_HP8200e=y > CONFIG_USB_STORAGE_SDDR09=y > CONFIG_USB_STORAGE_SDDR55=y > CONFIG_USB_STORAGE_JUMPSHOT=y > > # > # USB Human Interface Devices (HID) > # > CONFIG_USB_HID=m > CONFIG_USB_HIDINPUT=y > # CONFIG_HID_FF is not set > CONFIG_USB_HIDDEV=y > > # > # USB HID Boot Protocol drivers > # > CONFIG_USB_KBD=m > CONFIG_USB_MOUSE=m > # CONFIG_USB_AIPTEK is not set > # CONFIG_USB_WACOM is not set > # CONFIG_USB_KBTAB is not set > # CONFIG_USB_POWERMATE is not set > # CONFIG_USB_XPAD is not set > > # > # USB Imaging devices > # > # CONFIG_USB_MDC800 is not set > # CONFIG_USB_SCANNER is not set > # CONFIG_USB_MICROTEK is not set > # CONFIG_USB_HPUSBSCSI is not set > > # > # USB Multimedia devices > # > # CONFIG_USB_DABUSB is not set > > # > # Video4Linux support is needed for USB Multimedia device support > # > > # > # USB Network adaptors > # > # CONFIG_USB_CATC is not set > # CONFIG_USB_KAWETH is not set > # CONFIG_USB_PEGASUS is not set > # CONFIG_USB_RTL8150 is not set > CONFIG_USB_USBNET=m > > # > # USB Host-to-Host Cables > # > CONFIG_USB_AN2720=y > CONFIG_USB_BELKIN=y > CONFIG_USB_GENESYS=y > CONFIG_USB_NET1080=y > CONFIG_USB_PL2301=y > > # > # Intelligent USB Devices/Gadgets > # > CONFIG_USB_ARMLINUX=y > CONFIG_USB_EPSON2888=y > CONFIG_USB_ZAURUS=y > CONFIG_USB_CDCETHER=y > > # > # USB Network Adapters > # > # CONFIG_USB_AX8817X is not set > > # > # USB port drivers > # > > # > # USB Serial Converter support > # > CONFIG_USB_SERIAL=m > CONFIG_USB_SERIAL_GENERIC=y > CONFIG_USB_SERIAL_BELKIN=m > CONFIG_USB_SERIAL_WHITEHEAT=m > CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m > CONFIG_USB_SERIAL_EMPEG=m > CONFIG_USB_SERIAL_FTDI_SIO=m > CONFIG_USB_SERIAL_VISOR=m > CONFIG_USB_SERIAL_IPAQ=m > CONFIG_USB_SERIAL_IR=m > CONFIG_USB_SERIAL_EDGEPORT=m > CONFIG_USB_SERIAL_EDGEPORT_TI=m > CONFIG_USB_SERIAL_KEYSPAN_PDA=m > CONFIG_USB_SERIAL_KEYSPAN=m > # CONFIG_USB_SERIAL_KEYSPAN_MPR is not set > # CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set > # CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set > # CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set > # CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set > # CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set > # CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set > # CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set > # CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set > # CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set > # CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set > # CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set > CONFIG_USB_SERIAL_KLSI=m > # CONFIG_USB_SERIAL_KOBIL_SCT is not set > CONFIG_USB_SERIAL_MCT_U232=m > CONFIG_USB_SERIAL_PL2303=m > # CONFIG_USB_SERIAL_SAFE is not set > CONFIG_USB_SERIAL_CYBERJACK=m > CONFIG_USB_SERIAL_XIRCOM=m > CONFIG_USB_SERIAL_OMNINET=m > CONFIG_USB_EZUSB=y > > # > # USB Miscellaneous drivers > # > # CONFIG_USB_EMI26 is not set > CONFIG_USB_TIGL=m > # CONFIG_USB_AUERSWALD is not set > # CONFIG_USB_RIO500 is not set > # CONFIG_USB_LEGOTOWER is not set > # CONFIG_USB_BRLVGER is not set > # CONFIG_USB_LCD is not set > # CONFIG_USB_TEST is not set > # CONFIG_USB_GADGET is not set > > # > # File systems > # > CONFIG_EXT2_FS=y > # CONFIG_EXT2_FS_XATTR is not set > CONFIG_EXT3_FS=y > CONFIG_EXT3_FS_XATTR=y > # CONFIG_EXT3_FS_POSIX_ACL is not set > # CONFIG_EXT3_FS_SECURITY is not set > CONFIG_JBD=y > # CONFIG_JBD_DEBUG is not set > CONFIG_FS_MBCACHE=y > # CONFIG_REISERFS_FS is not set > # CONFIG_JFS_FS is not set > CONFIG_XFS_FS=y > # CONFIG_XFS_RT is not set > # CONFIG_XFS_QUOTA is not set > CONFIG_XFS_POSIX_ACL=y > # CONFIG_MINIX_FS is not set > CONFIG_ROMFS_FS=m > # CONFIG_QUOTA is not set > CONFIG_AUTOFS_FS=m > CONFIG_AUTOFS4_FS=m > > # > # CD-ROM/DVD Filesystems > # > CONFIG_ISO9660_FS=y > CONFIG_JOLIET=y > CONFIG_ZISOFS=y > CONFIG_ZISOFS_FS=y > # CONFIG_UDF_FS is not set > > # > # DOS/FAT/NT Filesystems > # > CONFIG_FAT_FS=y > CONFIG_MSDOS_FS=m > CONFIG_VFAT_FS=y > CONFIG_NTFS_FS=m > # CONFIG_NTFS_DEBUG is not set > # CONFIG_NTFS_RW is not set > > # > # Pseudo filesystems > # > CONFIG_PROC_FS=y > CONFIG_PROC_KCORE=y > CONFIG_SYSFS=y > # CONFIG_DEVFS_FS is not set > CONFIG_DEVPTS_FS=y > # CONFIG_DEVPTS_FS_XATTR is not set > CONFIG_TMPFS=y > # CONFIG_HUGETLBFS is not set > # CONFIG_HUGETLB_PAGE is not set > CONFIG_RAMFS=y > > # > # Miscellaneous filesystems > # > # CONFIG_ADFS_FS is not set > # CONFIG_AFFS_FS is not set > # CONFIG_HFS_FS is not set > # CONFIG_BEFS_FS is not set > # CONFIG_BFS_FS is not set > # CONFIG_EFS_FS is not set > CONFIG_CRAMFS=m > # CONFIG_VXFS_FS is not set > # CONFIG_HPFS_FS is not set > # CONFIG_QNX4FS_FS is not set > # CONFIG_SYSV_FS is not set > # CONFIG_UFS_FS is not set > > # > # Network File Systems > # > CONFIG_NFS_FS=m > CONFIG_NFS_V3=y > CONFIG_NFS_V4=y > # CONFIG_NFS_DIRECTIO is not set > CONFIG_NFSD=m > # CONFIG_NFSD_V3 is not set > # CONFIG_NFSD_TCP is not set > CONFIG_LOCKD=m > CONFIG_LOCKD_V4=y > CONFIG_EXPORTFS=m > CONFIG_SUNRPC=m > # CONFIG_SUNRPC_GSS is not set > CONFIG_SMB_FS=m > # CONFIG_SMB_NLS_DEFAULT is not set > # CONFIG_CIFS is not set > # CONFIG_NCP_FS is not set > CONFIG_CODA_FS=m > # CONFIG_CODA_FS_OLD_API is not set > # CONFIG_INTERMEZZO_FS is not set > # CONFIG_AFS_FS is not set > > # > # Partition Types > # > # CONFIG_PARTITION_ADVANCED is not set > CONFIG_MSDOS_PARTITION=y > > # > # Native Language Support > # > CONFIG_NLS=y > CONFIG_NLS_DEFAULT="cp437" > CONFIG_NLS_CODEPAGE_437=m > CONFIG_NLS_CODEPAGE_737=m > CONFIG_NLS_CODEPAGE_775=m > CONFIG_NLS_CODEPAGE_850=m > CONFIG_NLS_CODEPAGE_852=m > CONFIG_NLS_CODEPAGE_855=m > CONFIG_NLS_CODEPAGE_857=m > CONFIG_NLS_CODEPAGE_860=m > CONFIG_NLS_CODEPAGE_861=m > CONFIG_NLS_CODEPAGE_862=m > CONFIG_NLS_CODEPAGE_863=m > CONFIG_NLS_CODEPAGE_864=m > CONFIG_NLS_CODEPAGE_865=m > CONFIG_NLS_CODEPAGE_866=m > CONFIG_NLS_CODEPAGE_869=m > CONFIG_NLS_CODEPAGE_936=m > CONFIG_NLS_CODEPAGE_950=m > CONFIG_NLS_CODEPAGE_932=m > CONFIG_NLS_CODEPAGE_949=m > CONFIG_NLS_CODEPAGE_874=m > CONFIG_NLS_ISO8859_8=m > CONFIG_NLS_CODEPAGE_1250=m > CONFIG_NLS_CODEPAGE_1251=m > CONFIG_NLS_ISO8859_1=m > CONFIG_NLS_ISO8859_2=m > CONFIG_NLS_ISO8859_3=m > CONFIG_NLS_ISO8859_4=m > CONFIG_NLS_ISO8859_5=m > CONFIG_NLS_ISO8859_6=m > CONFIG_NLS_ISO8859_7=m > CONFIG_NLS_ISO8859_9=m > CONFIG_NLS_ISO8859_13=m > CONFIG_NLS_ISO8859_14=m > CONFIG_NLS_ISO8859_15=m > CONFIG_NLS_KOI8_R=m > CONFIG_NLS_KOI8_U=m > CONFIG_NLS_UTF8=m > > # > # Profiling support > # > # CONFIG_PROFILING is not set > > # > # Kernel hacking > # > # CONFIG_DEBUG_KERNEL is not set > # CONFIG_DEBUG_SPINLOCK_SLEEP is not set > # CONFIG_FRAME_POINTER is not set > CONFIG_X86_EXTRA_IRQS=y > CONFIG_X86_FIND_SMP_CONFIG=y > CONFIG_X86_MPPARSE=y > > # > # Security options > # > # CONFIG_SECURITY is not set > > # > # Cryptographic options > # > # CONFIG_CRYPTO is not set > > # > # Library routines > # > CONFIG_CRC32=m > CONFIG_ZLIB_INFLATE=y > CONFIG_X86_BIOS_REBOOT=y > CONFIG_PC=y > > Here's what I get when I try to look at my battery stats: > > omgterrar:/proc/acpi/battery/BAT0# cat state > present: yes > capacity state: ok > charging state: unknown > present rate: 0 mA > remaining capacity: 0 mAh > present voltage: 0 mV > > omgterrar:/proc/acpi/battery/BAT0# cat info > present: yes > design capacity: 0 mWh > last full capacity: 0 mWh > battery technology: non-rechargeable > design voltage: 0 mV > design capacity warning: 0 mWh > design capacity low: 0 mWh > capacity granularity 1: 0 mWh > capacity granularity 2: 0 mWh > model number: > serial number: > battery type: > OEM info: > > Here's the output of the ver_linux script: > > Linux omgterrar 2.6.1-mm5 #1 Tue Jan 20 12:25:44 EST 2004 i686 GNU/Linux > > Gnu C 3.3.3 > Gnu make 3.80 > util-linux 2.12 > mount 2.12 > module-init-tools 3.0-pre5 > e2fsprogs 1.35-WIP > xfsprogs 2.6.0 > pcmcia-cs 3.2.5 > PPP 2.4.2 > Linux C Library 2.3.2 > Dynamic linker (ldd) 2.3.2 > Procps 3.1.15 > Net-tools 1.60 > Console-tools 0.2.3 > Sh-utils 5.0.91 > Modules Loaded nvidia ds yenta_socket pcmcia_core 8250 > serial_core snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss > snd_mixer_oss snd_intel8x0 snd_ac97_codec snd_pcm snd_timer > snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd > soundcore thermal processor fan button battery ac ehci_hcd sd_mod > usb_storage evdev psmouse cpufreq_userspace ide_cd cdrom usbmouse > i8k usblp cpuid microcode uhci_hcd usbcore 3c59x > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- Charles Bueche sand, snow, wave, wind and net -surfer