From: john stultz <johnstul@us.ibm.com>
To: lkml <linux-kernel@vger.kernel.org>
Cc: Andrea Arcangeli <andrea@suse.de>, Andi Kleen <ak@suse.de>,
Ulrich Drepper <drepper@redhat.com>,
Jamie Lokier <jamie@shareable.org>,
"Martin J. Bligh" <mbligh@aracnet.com>,
Wim Coekaerts <wim.coekaerts@oracle.com>,
Joel Becker <Joel.Becker@oracle.com>,
Chris McDermott <lcm@us.ibm.com>
Subject: [RFC][PATCH] linux-2.6.4-pre1_vsyscall-gtod_B3-part1 (1/3)
Date: Wed, 03 Mar 2004 16:12:18 -0800 [thread overview]
Message-ID: <1078359137.10076.193.camel@cog.beaverton.ibm.com> (raw)
In-Reply-To: <1078359081.10076.191.camel@cog.beaverton.ibm.com>
All,
This patch renames variables in timer_cyclone.c and timer_tsc.c to
avoid conflicts in the global namespace. This allows the renamed
variables to be used in the vsyscall-gtod implementation, and is a
pre-requisite for the vsyscall-gtod_B3-part2 patch.
thanks
-john
diff -Nru a/arch/i386/kernel/timers/timer_cyclone.c b/arch/i386/kernel/timers/timer_cyclone.c
--- a/arch/i386/kernel/timers/timer_cyclone.c Mon Mar 1 13:15:32 2004
+++ b/arch/i386/kernel/timers/timer_cyclone.c Mon Mar 1 13:15:32 2004
@@ -21,18 +21,17 @@
extern spinlock_t i8253_lock;
/* Number of usecs that the last interrupt was delayed */
-static int delay_at_last_interrupt;
+int cyclone_delay_at_last_interrupt;
#define CYCLONE_CBAR_ADDR 0xFEB00CD0
#define CYCLONE_PMCC_OFFSET 0x51A0
#define CYCLONE_MPMC_OFFSET 0x51D0
#define CYCLONE_MPCS_OFFSET 0x51A8
-#define CYCLONE_TIMER_FREQ 100000000
#define CYCLONE_TIMER_MASK (((u64)1<<40)-1) /* 40 bit mask */
int use_cyclone = 0;
-static u32* volatile cyclone_timer; /* Cyclone MPMC0 register */
-static u32 last_cyclone_low;
+u32* volatile cyclone_timer; /* Cyclone MPMC0 register */
+u32 last_cyclone_low;
static u32 last_cyclone_high;
static unsigned long long monotonic_base;
static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED;
@@ -57,7 +56,7 @@
spin_lock(&i8253_lock);
read_cyclone_counter(last_cyclone_low,last_cyclone_high);
- /* read values for delay_at_last_interrupt */
+ /* read values for cyclone_delay_at_last_interrupt */
outb_p(0x00, 0x43); /* latch the count ASAP */
count = inb_p(0x40); /* read the latched count */
@@ -67,7 +66,7 @@
/* lost tick compensation */
delta = last_cyclone_low - delta;
delta /= (CYCLONE_TIMER_FREQ/1000000);
- delta += delay_at_last_interrupt;
+ delta += cyclone_delay_at_last_interrupt;
lost = delta/(1000000/HZ);
delay = delta%(1000000/HZ);
if (lost >= 2)
@@ -78,16 +77,16 @@
monotonic_base += (this_offset - last_offset) & CYCLONE_TIMER_MASK;
write_sequnlock(&monotonic_lock);
- /* calculate delay_at_last_interrupt */
+ /* calculate cyclone_delay_at_last_interrupt */
count = ((LATCH-1) - count) * TICK_SIZE;
- delay_at_last_interrupt = (count + LATCH/2) / LATCH;
+ cyclone_delay_at_last_interrupt = (count + LATCH/2) / LATCH;
/* catch corner case where tick rollover occured
* between cyclone and pit reads (as noted when
* usec delta is > 90% # of usecs/tick)
*/
- if (lost && abs(delay - delay_at_last_interrupt) > (900000/HZ))
+ if (lost && abs(delay - cyclone_delay_at_last_interrupt) > (900000/HZ))
jiffies_64++;
}
@@ -96,7 +95,7 @@
u32 offset;
if(!cyclone_timer)
- return delay_at_last_interrupt;
+ return cyclone_delay_at_last_interrupt;
/* Read the cyclone timer */
offset = cyclone_timer[0];
@@ -109,7 +108,7 @@
offset = offset/(CYCLONE_TIMER_FREQ/1000000);
/* our adjusted time offset in microseconds */
- return delay_at_last_interrupt + offset;
+ return cyclone_delay_at_last_interrupt + offset;
}
static unsigned long long monotonic_clock_cyclone(void)
diff -Nru a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c
--- a/arch/i386/kernel/timers/timer_tsc.c Mon Mar 1 13:15:32 2004
+++ b/arch/i386/kernel/timers/timer_tsc.c Mon Mar 1 13:15:32 2004
@@ -33,7 +33,7 @@
static int use_tsc;
/* Number of usecs that the last interrupt was delayed */
-static int delay_at_last_interrupt;
+int tsc_delay_at_last_interrupt;
static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */
static unsigned long last_tsc_high; /* msb 32 bits of Time Stamp Counter */
@@ -104,7 +104,7 @@
"0" (eax));
/* our adjusted time offset in microseconds */
- return delay_at_last_interrupt + edx;
+ return tsc_delay_at_last_interrupt + edx;
}
static unsigned long long monotonic_clock_tsc(void)
@@ -223,7 +223,7 @@
"0" (eax));
delta = edx;
}
- delta += delay_at_last_interrupt;
+ delta += tsc_delay_at_last_interrupt;
lost = delta/(1000000/HZ);
delay = delta%(1000000/HZ);
if (lost >= 2) {
@@ -248,15 +248,15 @@
monotonic_base += cycles_2_ns(this_offset - last_offset);
write_sequnlock(&monotonic_lock);
- /* calculate delay_at_last_interrupt */
+ /* calculate tsc_delay_at_last_interrupt */
count = ((LATCH-1) - count) * TICK_SIZE;
- delay_at_last_interrupt = (count + LATCH/2) / LATCH;
+ tsc_delay_at_last_interrupt = (count + LATCH/2) / LATCH;
/* catch corner case where tick rollover occured
* between tsc and pit reads (as noted when
* usec delta is > 90% # of usecs/tick)
*/
- if (lost && abs(delay - delay_at_last_interrupt) > (900000/HZ))
+ if (lost && abs(delay - tsc_delay_at_last_interrupt) > (900000/HZ))
jiffies_64++;
}
@@ -308,7 +308,7 @@
monotonic_base += cycles_2_ns(this_offset - last_offset);
write_sequnlock(&monotonic_lock);
- /* calculate delay_at_last_interrupt */
+ /* calculate tsc_delay_at_last_interrupt */
/*
* Time offset = (hpet delta) * ( usecs per HPET clock )
* = (hpet delta) * ( usecs per tick / HPET clocks per tick)
@@ -316,9 +316,9 @@
* Where,
* hpet_usec_quotient = (2^32 * usecs per tick)/HPET clocks per tick
*/
- delay_at_last_interrupt = hpet_current - offset;
- ASM_MUL64_REG(temp, delay_at_last_interrupt,
- hpet_usec_quotient, delay_at_last_interrupt);
+ tsc_delay_at_last_interrupt = hpet_current - offset;
+ ASM_MUL64_REG(temp, tsc_delay_at_last_interrupt,
+ hpet_usec_quotient, tsc_delay_at_last_interrupt);
}
#endif
diff -Nru a/include/asm-i386/timer.h b/include/asm-i386/timer.h
--- a/include/asm-i386/timer.h Mon Mar 1 13:15:32 2004
+++ b/include/asm-i386/timer.h Mon Mar 1 13:15:32 2004
@@ -20,6 +20,7 @@
};
#define TICK_SIZE (tick_nsec / 1000)
+#define CYCLONE_TIMER_FREQ 100000000
extern struct timer_opts* select_timer(void);
extern void clock_fallback(void);
next prev parent reply other threads:[~2004-03-04 0:12 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-03-04 0:11 [RFC][PATCH] vsyscall-gtod_B3 (0/3) john stultz
2004-03-04 0:12 ` john stultz [this message]
2004-03-04 0:13 ` [RFC][PATCH] linux-2.6.4-pre1_vsyscall-gtod_B3-part2 (2/3) john stultz
2004-03-04 0:14 ` [RFC][PATCH] linux-2.6.4-pre1_vsyscall-gtod_B3-part3 (3/3) john stultz
2004-03-04 0:55 ` Andrea Arcangeli
2004-03-04 2:16 ` Ulrich Drepper
2004-03-04 2:43 ` john stultz
2004-03-04 3:14 ` Andrea Arcangeli
2004-03-04 8:09 ` Ulrich Drepper
2004-03-04 19:02 ` john stultz
2004-03-04 2:47 ` Andrea Arcangeli
2004-03-04 2:54 ` john stultz
2004-03-04 3:15 ` Andrea Arcangeli
2004-03-04 8:57 ` Jakub Jelinek
2004-03-04 16:45 ` Andrea Arcangeli
2004-03-04 8:00 ` Jamie Lokier
2004-03-04 8:37 ` Jakub Jelinek
2004-03-04 17:48 ` Andrea Arcangeli
2004-03-04 0:15 ` [RFC] vsyscall-gtod_test_B3.tar.gz john stultz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1078359137.10076.193.camel@cog.beaverton.ibm.com \
--to=johnstul@us.ibm.com \
--cc=Joel.Becker@oracle.com \
--cc=ak@suse.de \
--cc=andrea@suse.de \
--cc=drepper@redhat.com \
--cc=jamie@shareable.org \
--cc=lcm@us.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mbligh@aracnet.com \
--cc=wim.coekaerts@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®