Re: [PATCH RFC v3 03/11] scsi: ufs: qcom: Perform read back after writing testbus config

[Can Guo <quic_cang@quicinc.com>]

On 12/22/2023 3:09 AM, Andrew Halaney wrote:
> Currently, the testbus configuration is written and completed with an
> mb().
> 
> mb() ensure that the write completes, but completion doesn't mean
> that it isn't stored in a buffer somewhere. The recommendation for
> ensuring this bit has taken effect on the device is to perform a read
> back to force it to make it all the way to the device. This is
> documented in device-io.rst and a talk by Will Deacon on this can
> be seen over here:
> 
>      https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
> 
> Let's do that to ensure the bit hits the device. Because the mb()'s
> purpose wasn't to add extra ordering (on top of the ordering guaranteed
> by writel()/readl()), it can safely be removed.
> 
> Fixes: 9c46b8676271 ("scsi: ufs-qcom: dump additional testbus registers")
> Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
> ---
>   drivers/ufs/host/ufs-qcom.c | 8 +++-----
>   1 file changed, 3 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
> index 4c15c8a1d058..6df2ab3b6f23 100644
> --- a/drivers/ufs/host/ufs-qcom.c
> +++ b/drivers/ufs/host/ufs-qcom.c
> @@ -1332,6 +1332,9 @@ static void ufs_qcom_enable_test_bus(struct ufs_qcom_host *host)
>   	ufshcd_rmwl(host->hba, UFS_REG_TEST_BUS_EN,
>   			UFS_REG_TEST_BUS_EN, REG_UFS_CFG1);
>   	ufshcd_rmwl(host->hba, TEST_BUS_EN, TEST_BUS_EN, REG_UFS_CFG1);
> +
> +	/* dummy read to ensure this has been enabled prior to returning */
> +	ufshcd_readl(host->hba, REG_UFS_CFG1);
>   }
>   
>   static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host)
> @@ -1429,11 +1432,6 @@ int ufs_qcom_testbus_config(struct ufs_qcom_host *host)
>   		    (u32)host->testbus.select_minor << offset,
>   		    reg);
>   	ufs_qcom_enable_test_bus(host);
> -	/*
> -	 * Make sure the test bus configuration is
> -	 * committed before returning.
> -	 */
> -	mb();
>   
>   	return 0;
>   }
> 
Reviewed-by: Can Guo <quic_cang@quicinc.com>