On Mon, 2004-07-05 at 02:28, Marcelo Tosatti wrote: > On Mon, Jul 05, 2004 at 12:15:52AM +0200, Martin Schlemmer wrote: > > Hi > > > > I have tried to update my gateway's kernel to 2.4.26 (Been running > > happily on 2.4.17, but a bit _old_, so finally decided this weekend > > to try and update it). At boot though it only gets to: > > > > -- > > Uncompressing kernel... booting linux... > > -- > > > > and then locks hard (the capslock and scroll lock leds lids) > > > > Its an old P3 450 on an Asus P2B (BX440 chipset). .config is pretty > > much the same as for the 2.4.17 kernel. > > > > I did have grsecurity initially applied, but I tried on an vanilla > > kernel as well (besides some netfiler POM patches, but they are all > > modules). I also tried to disable acpi. > > > > Any suggestions would be appreciated. .config attached. > > Hi Martin, > > I do not know the answer for your problem but I'll try to help. > > Can you do a binary search and find out which v2.4 kernel stops working? > > You can start with 2.4.21, see if that works, if so, try 2.4.23, etc? Sure, will do and let you know, thanks. -- Martin Schlemmer