On Sun, 2004-07-18 at 13:12, Jurgen Kramer wrote: > On Sun, 2004-07-18 at 07:41, Linus Torvalds wrote: > > MTD updates, i2c updates and some USB updates, and a lot of small stuff > > (sparse cleanups and fixes from Al etc). > > > > Linus > > > Just gave it a try. My EHCI controller is still failing (Asus P4C800-E > i875p) as in the 2.6.7-mm series. > > > ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: BIOS handoff failed (104, 1010001) > ehci_hcd 0000:00:1d.7: can't reset > ehci_hcd 0000:00:1d.7: init 0000:00:1d.7 fail, -95 > ehci_hcd: probe of 0000:00:1d.7 failed with error -95 > USB Universal Host Controller Interface driver v2.2 > > > Full dmesg output attached. > I have a P4C800-E (DLX) as well, but it is working fine. The big differences I see is: 1) You have the 3Com network device where I have the E1000 (I thought all P4C800-E have E1000, where the smaller ones, P4C800, P4C800-DLX have 3Com ??) 2) I use Interrupt Vectors, where you seem not to? I am on bios 1016 (latest stable for P4C800-E DLX, while I see there is a 1017 beta 002). Not sure if you want my .config to compare? Cheers, -- Martin Schlemmer