From: Daniele Pizzoni <auouo@tin.it>
To: kernel-janitors <kernel-janitors@lists.osdl.org>
Cc: LKML <linux-kernel@vger.kernel.org>, Ingo Molnar <mingo@elte.hu>
Subject: [PATCH 4/8] replacing/fixing printk with pr_debug/pr_info in arch/i386 - mpparse.c
Date: Sun, 17 Oct 2004 19:10:48 +0200 [thread overview]
Message-ID: <1098032569.3023.124.camel@pdp11.tsho.org> (raw)
Replace custom macro Dprintk (defined in apic.h included via smp.h)
with pr_debug from kernel.h.
Use pr_info when appropriate.
Fix consistency of printks.
Signed-off-by: Daniele Pizzoni <auouo@tin.it>
Index: linux-2.6.9-rc4/arch/i386/kernel/mpparse.c
===================================================================
--- linux-2.6.9-rc4.orig/arch/i386/kernel/mpparse.c 2004-08-14 07:36:44.000000000 +0200
+++ linux-2.6.9-rc4/arch/i386/kernel/mpparse.c 2004-10-17 17:01:19.482218648 +0200
@@ -13,6 +13,7 @@
* Paul Diefenbaugh: Added full ACPI support
*/
+#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/irq.h>
#include <linux/init.h>
@@ -130,55 +131,55 @@ void __init MP_processor_info (struct mp
apicid = mpc_apic_id(m, translation_table[mpc_record]);
if (m->mpc_featureflag&(1<<0))
- Dprintk(" Floating point unit present.\n");
+ pr_debug(" Floating point unit present.\n");
if (m->mpc_featureflag&(1<<7))
- Dprintk(" Machine Exception supported.\n");
+ pr_debug(" Machine Exception supported.\n");
if (m->mpc_featureflag&(1<<8))
- Dprintk(" 64 bit compare & exchange supported.\n");
+ pr_debug(" 64 bit compare & exchange supported.\n");
if (m->mpc_featureflag&(1<<9))
- Dprintk(" Internal APIC present.\n");
+ pr_debug(" Internal APIC present.\n");
if (m->mpc_featureflag&(1<<11))
- Dprintk(" SEP present.\n");
+ pr_debug(" SEP present.\n");
if (m->mpc_featureflag&(1<<12))
- Dprintk(" MTRR present.\n");
+ pr_debug(" MTRR present.\n");
if (m->mpc_featureflag&(1<<13))
- Dprintk(" PGE present.\n");
+ pr_debug(" PGE present.\n");
if (m->mpc_featureflag&(1<<14))
- Dprintk(" MCA present.\n");
+ pr_debug(" MCA present.\n");
if (m->mpc_featureflag&(1<<15))
- Dprintk(" CMOV present.\n");
+ pr_debug(" CMOV present.\n");
if (m->mpc_featureflag&(1<<16))
- Dprintk(" PAT present.\n");
+ pr_debug(" PAT present.\n");
if (m->mpc_featureflag&(1<<17))
- Dprintk(" PSE present.\n");
+ pr_debug(" PSE present.\n");
if (m->mpc_featureflag&(1<<18))
- Dprintk(" PSN present.\n");
+ pr_debug(" PSN present.\n");
if (m->mpc_featureflag&(1<<19))
- Dprintk(" Cache Line Flush Instruction present.\n");
+ pr_debug(" Cache Line Flush Instruction present.\n");
/* 20 Reserved */
if (m->mpc_featureflag&(1<<21))
- Dprintk(" Debug Trace and EMON Store present.\n");
+ pr_debug(" Debug Trace and EMON Store present.\n");
if (m->mpc_featureflag&(1<<22))
- Dprintk(" ACPI Thermal Throttle Registers present.\n");
+ pr_debug(" ACPI Thermal Throttle Registers present.\n");
if (m->mpc_featureflag&(1<<23))
- Dprintk(" MMX present.\n");
+ pr_debug(" MMX present.\n");
if (m->mpc_featureflag&(1<<24))
- Dprintk(" FXSR present.\n");
+ pr_debug(" FXSR present.\n");
if (m->mpc_featureflag&(1<<25))
- Dprintk(" XMM present.\n");
+ pr_debug(" XMM present.\n");
if (m->mpc_featureflag&(1<<26))
- Dprintk(" Willamette New Instructions present.\n");
+ pr_debug(" Willamette New Instructions present.\n");
if (m->mpc_featureflag&(1<<27))
- Dprintk(" Self Snoop present.\n");
+ pr_debug(" Self Snoop present.\n");
if (m->mpc_featureflag&(1<<28))
- Dprintk(" HT present.\n");
+ pr_debug(" HT present.\n");
if (m->mpc_featureflag&(1<<29))
- Dprintk(" Thermal Monitor present.\n");
+ pr_debug(" Thermal Monitor present.\n");
/* 30, 31 Reserved */
if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
- Dprintk(" Bootup CPU\n");
+ pr_debug(" Bootup CPU\n");
boot_cpu_physical_apicid = m->mpc_apicid;
boot_cpu_logical_apicid = apicid;
}
@@ -250,10 +251,10 @@ static void __init MP_ioapic_info (struc
if (!(m->mpc_flags & MPC_APIC_USABLE))
return;
- printk(KERN_INFO "I/O APIC #%d Version %d at 0x%lX.\n",
+ pr_info("I/O APIC #%d Version %d at 0x%lX.\n",
m->mpc_apicid, m->mpc_apicver, m->mpc_apicaddr);
if (nr_ioapics >= MAX_IO_APICS) {
- printk(KERN_CRIT "Max # of I/O APICs (%d) exceeded (found %d).\n",
+ printk(KERN_EMERG "Max # of I/O APICs (%d) exceeded (found %d).\n",
MAX_IO_APICS, nr_ioapics);
panic("Recompile kernel with bigger MAX_IO_APICS!.\n");
}
@@ -269,7 +270,7 @@ static void __init MP_ioapic_info (struc
static void __init MP_intsrc_info (struct mpc_config_intsrc *m)
{
mp_irqs [mp_irq_entries] = *m;
- Dprintk("Int: type %d, pol %d, trig %d, bus %d,"
+ pr_debug("Int: type %d, pol %d, trig %d, bus %d,"
" IRQ %02x, APIC ID %x, APIC INT %02x\n",
m->mpc_irqtype, m->mpc_irqflag & 3,
(m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
@@ -280,7 +281,7 @@ static void __init MP_intsrc_info (struc
static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m)
{
- Dprintk("Lint: type %d, pol %d, trig %d, bus %d,"
+ pr_debug("Lint: type %d, pol %d, trig %d, bus %d,"
" IRQ %02x, APIC ID %x, APIC LINT %02x\n",
m->mpc_irqtype, m->mpc_irqflag & 3,
(m->mpc_irqflag >> 2) &3, m->mpc_srcbusid,
@@ -303,7 +304,7 @@ static void __init MP_lintsrc_info (stru
#ifdef CONFIG_X86_NUMAQ
static void __init MP_translation_info (struct mpc_config_translation *m)
{
- printk(KERN_INFO "Translation: record %d, type %d, quad %d, global %d, local %d\n", mpc_record, m->trans_type, m->trans_quad, m->trans_global, m->trans_local);
+ pr_info("Translation: record %d, type %d, quad %d, global %d, local %d\n", mpc_record, m->trans_type, m->trans_quad, m->trans_global, m->trans_local);
if (mpc_record >= MAX_MPC_ENTRY)
printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
@@ -324,7 +325,7 @@ static void __init smp_read_mpc_oem(stru
unsigned char *oemptr = ((unsigned char *)oemtable)+count;
mpc_record = 0;
- printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n", oemtable);
+ pr_info("Found an OEM MPC table at %8p - parsing it ... \n", oemtable);
if (memcmp(oemtable->oem_signature,MPC_OEM_SIGNATURE,4))
{
printk(KERN_WARNING "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
@@ -364,7 +365,7 @@ static inline void mps_oem_check(struct
char *productid)
{
if (strncmp(oem, "IBM NUMA", 8))
- printk("Warning! May not be a NUMA-Q system!\n");
+ printk(KERN_WARN "Warning! May not be a NUMA-Q system!\n");
if (mpc->mpc_oemptr)
smp_read_mpc_oem((struct mp_config_oemtable *) mpc->mpc_oemptr,
mpc->mpc_oemsize);
@@ -402,15 +403,15 @@ static int __init smp_read_mpc(struct mp
}
memcpy(oem,mpc->mpc_oem,8);
oem[8]=0;
- printk(KERN_INFO "OEM ID: %s ",oem);
+ pr_info("OEM ID: %s ",oem);
memcpy(str,mpc->mpc_productid,12);
str[12]=0;
- printk("Product ID: %s ",str);
+ pr_info("Product ID: %s ",str);
mps_oem_check(mpc, oem, str);
- printk("APIC at: 0x%lX\n",mpc->mpc_lapic);
+ pr_info("APIC at: 0x%lX\n",mpc->mpc_lapic);
/*
* Save the local APIC address (it might be non-default) -- but only
@@ -517,12 +518,12 @@ static void __init construct_default_ioi
* If it does, we assume it's valid.
*/
if (mpc_default_type == 5) {
- printk(KERN_INFO "ISA/PCI bus type with no IRQ information... falling back to ELCR\n");
+ pr_info("ISA/PCI bus type with no IRQ information... falling back to ELCR\n");
if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || ELCR_trigger(13))
printk(KERN_WARNING "ELCR contains invalid data... not using ELCR\n");
else {
- printk(KERN_INFO "Using ELCR to identify PCI interrupts\n");
+ pr_info("Using ELCR to identify PCI interrupts\n");
ELCR_fallback = 1;
}
}
@@ -597,7 +598,6 @@ static inline void __init construct_defa
bus.mpc_busid = 0;
switch (mpc_default_type) {
default:
- printk("???\n");
printk(KERN_ERR "Unknown standard configuration %d\n",
mpc_default_type);
/* fall through */
@@ -661,18 +661,18 @@ void __init get_smp_config (void)
* processors, where MPS only supports physical.
*/
if (acpi_lapic && acpi_ioapic) {
- printk(KERN_INFO "Using ACPI (MADT) for SMP configuration information\n");
+ pr_info("Using ACPI (MADT) for SMP configuration information\n");
return;
}
else if (acpi_lapic)
- printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n");
+ pr_info("Using ACPI for processor (LAPIC) configuration information\n");
- printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification);
+ pr_info("Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification);
if (mpf->mpf_feature2 & (1<<7)) {
- printk(KERN_INFO " IMCR and PIC compatibility mode.\n");
+ pr_info(" IMCR and PIC compatibility mode.\n");
pic_mode = 1;
} else {
- printk(KERN_INFO " Virtual Wire compatibility mode.\n");
+ pr_info(" Virtual Wire compatibility mode.\n");
pic_mode = 0;
}
@@ -681,7 +681,7 @@ void __init get_smp_config (void)
*/
if (mpf->mpf_feature1 != 0) {
- printk(KERN_INFO "Default MP configuration #%d\n", mpf->mpf_feature1);
+ pr_info("Default MP configuration #%d\n", mpf->mpf_feature1);
construct_default_ISA_mptable(mpf->mpf_feature1);
} else if (mpf->mpf_physptr) {
@@ -717,7 +717,7 @@ void __init get_smp_config (void)
} else
BUG();
- printk(KERN_INFO "Processors: %d\n", num_processors);
+ pr_info("Processors: %d\n", num_processors);
/*
* Only use the first configuration found.
*/
@@ -728,9 +728,9 @@ static int __init smp_scan_config (unsig
unsigned long *bp = phys_to_virt(base);
struct intel_mp_floating *mpf;
- Dprintk("Scan SMP from %p for %ld bytes.\n", bp,length);
+ pr_debug("Scan SMP from %p for %ld bytes.\n", bp,length);
if (sizeof(*mpf) != 16)
- printk("Error: MPF size\n");
+ printk(KERN_ERR "Error: MPF size\n");
while (length > 0) {
mpf = (struct intel_mp_floating *)bp;
@@ -741,7 +741,7 @@ static int __init smp_scan_config (unsig
|| (mpf->mpf_specification == 4)) ) {
smp_found_config = 1;
- printk(KERN_INFO "found SMP MP-table at %08lx\n",
+ pr_info("found SMP MP-table at %08lx\n",
virt_to_phys(mpf));
reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE);
if (mpf->mpf_physptr) {
@@ -825,7 +825,7 @@ void __init mp_register_lapic_address (
if (boot_cpu_physical_apicid == -1U)
boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
- Dprintk("Boot CPU = %d\n", boot_cpu_physical_apicid);
+ pr_debug("Boot CPU = %d\n", boot_cpu_physical_apicid);
}
@@ -898,7 +898,7 @@ void __init mp_register_ioapic (
int idx = 0;
if (nr_ioapics >= MAX_IO_APICS) {
- printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
+ printk(KERN_EMERG "ERROR: Max # of I/O APICs (%d) exceeded "
"(found %d)\n", MAX_IO_APICS, nr_ioapics);
panic("Recompile kernel with bigger MAX_IO_APICS!\n");
}
@@ -927,7 +927,7 @@ void __init mp_register_ioapic (
mp_ioapic_routing[idx].gsi_end = gsi_base +
io_apic_get_redir_entries(idx);
- printk("IOAPIC[%d]: apic_id %d, version %d, address 0x%lx, "
+ pr_info("IOAPIC[%d]: apic_id %d, version %d, address 0x%lx, "
"GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid,
mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr,
mp_ioapic_routing[idx].gsi_base,
@@ -971,7 +971,7 @@ void __init mp_override_legacy_irq (
intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */
intsrc.mpc_dstirq = pin; /* INTIN# */
- Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n",
+ pr_debug("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n",
intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
(intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq);
@@ -994,7 +994,7 @@ void __init mp_config_acpi_legacy_irqs (
* Fabricate the legacy ISA bus (bus #31).
*/
mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
- Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
+ pr_debug("Bus #%d is ISA\n", MP_ISA_BUS);
/*
* Locate the IOAPIC that manages the ISA IRQs (0-15).
@@ -1029,7 +1029,7 @@ void __init mp_config_acpi_legacy_irqs (
}
if (idx != mp_irq_entries) {
- printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
+ pr_info("ACPI: IRQ%d used by override.\n", i);
continue; /* IRQ already used */
}
@@ -1037,7 +1037,7 @@ void __init mp_config_acpi_legacy_irqs (
intsrc.mpc_srcbusirq = i; /* Identity mapped */
intsrc.mpc_dstirq = i;
- Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, "
+ pr_debug("Int: type %d, pol %d, trig %d, bus %d, irq %d, "
"%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
(intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
intsrc.mpc_srcbusirq, intsrc.mpc_dstapic,
@@ -1088,7 +1088,7 @@ void mp_register_gsi (u32 gsi, int edge_
return;
}
if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
- Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
+ pr_debug("Pin %d-%d already programmed\n",
mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
return;
}
next reply other threads:[~2004-10-17 16:12 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-10-17 17:10 Daniele Pizzoni [this message]
2004-10-17 16:26 ` Denis Vlasenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1098032569.3023.124.camel@pdp11.tsho.org \
--to=auouo@tin.it \
--cc=kernel-janitors@lists.osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®