mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Martin Schlemmer [c]" <azarah@nosferatu.za.org>
To: Andrew Morton <akpm@osdl.org>
Cc: torvalds@osdl.org, Sam Ravnborg <sam@ravnborg.org>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2.6.9-bk7] Select cpio_list or source directory for initramfs image updates [u]
Date: Sun, 24 Oct 2004 15:59:22 +0200	[thread overview]
Message-ID: <1098626362.12420.3.camel@nosferatu.lan> (raw)
In-Reply-To: <20041024030844.18f2fedd.akpm@osdl.org>


[-- Attachment #1.1: Type: text/plain, Size: 2048 bytes --]

On Sun, 2004-10-24 at 03:08 -0700, Andrew Morton wrote:
> "Martin Schlemmer [c]" <azarah@nosferatu.za.org> wrote:
> >
> > Here is some updates after talking to Sam Ravnborg.  He did not yet come
> >  back to me, I am not sure if I understood 100% what he meant, but hopefully
> >  somebody else will be so kind as to comment.
> > 
> >  Here is a shortish changelog:
> > 
> >  - Fix an issue reported by Esben Nielsen <simlo@phys.au.dk> (with
> >  suggestion from Sam Ravnborg).  Build failed if $O (output dir) was
> >  set.  This is done by pre-pending $srctree if the shipped list is
> >  referenced.
> > 
> >  - Also fix calling of gen_initramfs_list.sh if $O (output dir) is set
> >  by pre-pending $srctree.
> > 
> >  - I also moved initramfs_list to initramfs_list.shipped, to make sure we
> >  always have an 'fall back' list (say you unset CONFIG_INITRAMFS_SOURCE
> >  and deleted your custom intramfs source directory, then building will not
> >  fail).
> > 
> >  - Kbuild style cleanups.
> > 
> >  - Improved error checking.  For example gen_initramfs_list.sh will
> >  output a simple list if the target directory is empty, and we verify
> >  that the shipped initramfs_list is present before touching it.
> > 
> >  - Only update the temp initramfs_list if the source list/directory have
> >  changed.
> > 
> >  - Cleanup temporary initramfs_list when 'make clean' or 'make mrproper'
> >  is called.
> > 
> > 
> >  This patch should apply to both 2.6.9-bk7 and 2.6.9-mm1.
> 
> hmm.  You have a patch in the email body and two slightly different patches
> as attachments.  All bases covered ;)
> 
> I'll stick
> "select-cpio_list-or-source-directory-for-initramfs-image-v7.patch" into
> -mm but would prefer that this patch come in via Sam's tree please.
> 

No comment =)  v7 should be fine, but it have one typo that wont affect
anything, so here is v8.  I have tested with O= set, and all fail
conditions I could think of, and it seems all right.


Thanks,

-- 
Martin Schlemmer


[-- Attachment #1.2: select-cpio_list-or-source-directory-for-initramfs-image-v8.patch --]
[-- Type: text/x-patch, Size: 5870 bytes --]

diff -uprN -X dontdiff linux-2.6.9-bk7.orig/scripts/gen_initramfs_list.sh linux-2.6.9-bk7/scripts/gen_initramfs_list.sh
--- linux-2.6.9-bk7.orig/scripts/gen_initramfs_list.sh	2004-10-23 11:23:49.000000000 +0200
+++ linux-2.6.9-bk7/scripts/gen_initramfs_list.sh	2004-10-23 11:26:52.000000000 +0200
@@ -76,9 +76,23 @@ parse() {
 	return 0
 }
 
-find "${srcdir}" -printf "%p %m %U %G\n" | \
-while read x; do
-	parse ${x}
-done
+dirlist=$(find "${srcdir}" -printf "%p %m %U %G\n" 2>/dev/null)
+
+# If $dirlist is only one line, then the directory is empty
+if [  "$(echo "${dirlist}" | wc -l)" -gt 1 ]; then
+	echo "${dirlist}" | \
+	while read x; do
+		parse ${x}
+	done
+else
+	# Failsafe in case directory is empty
+	cat <<-EOF
+		# This is a very simple initramfs
+
+		dir /dev 0755 0 0
+		nod /dev/console 0600 0 0 c 5 1
+		dir /root 0700 0 0
+	EOF
+fi
 
 exit 0
diff -uprN -X dontdiff linux-2.6.9-bk7.orig/usr/Makefile linux-2.6.9-bk7/usr/Makefile
--- linux-2.6.9-bk7.orig/usr/Makefile	2004-10-23 11:23:54.000000000 +0200
+++ linux-2.6.9-bk7/usr/Makefile	2004-10-23 13:56:28.691508824 +0200
@@ -6,9 +6,11 @@ hostprogs-y  := gen_init_cpio
 clean-files := initramfs_data.cpio.gz
 
 # If you want a different list of files in the initramfs_data.cpio
-# then you can either overwrite the cpio_list in this directory
-# or set INITRAMFS_LIST to another filename.
-INITRAMFS_LIST := $(obj)/initramfs_list
+# then you can either overwrite initramfs_list.shipped in this directory
+# or set CONFIG_INITRAMFS_SOURCE to another filename or directory.
+initramfs_list := initramfs_list
+
+clean-files += $(initramfs_list)
 
 # initramfs_data.o contains the initramfs_data.cpio.gz image.
 # The image is included using .incbin, a dependency which is not
@@ -23,28 +25,75 @@ $(obj)/initramfs_data.o: $(obj)/initramf
 # Commented out for now
 # initramfs-y := $(obj)/root/hello
 
-quiet_cmd_gen_list = GEN_INITRAMFS_LIST $@
+# Returns:
+#   valid command if everything should be fine
+#   'uptodate' if nothing needs to be done
+#   'missing' if $(srctree)/$(src)/$(initramfs_list).shipped is missing
+quiet_cmd_gen_list = GEN     $@
       cmd_gen_list = $(shell \
-        if test -f $(CONFIG_INITRAMFS_SOURCE); then \
-	  if [ $(CONFIG_INITRAMFS_SOURCE) != $@ ]; then \
-	    echo 'cp -f $(CONFIG_INITRAMFS_SOURCE) $@'; \
+	if [ -d $(CONFIG_INITRAMFS_SOURCE) ]; \
+	then \
+	  if [ ! -f "$(obj)/$(initramfs_list)" -o \
+	       "x`find $(CONFIG_INITRAMFS_SOURCE) -newer "$(obj)/$(initramfs_list)" 2>/dev/null`" != "x" ]; \
+	  then \
+	    echo '$(CONFIG_SHELL) $(srctree)/scripts/gen_initramfs_list.sh \
+	      $(CONFIG_INITRAMFS_SOURCE) > "$(obj)/$(initramfs_list)"'; \
 	  else \
-	    echo 'echo Using shipped $@'; \
-	  fi; \
-	elif test -d $(CONFIG_INITRAMFS_SOURCE); then \
-	  echo 'scripts/gen_initramfs_list.sh $(CONFIG_INITRAMFS_SOURCE) > $@'; \
+	    echo 'uptodate'; \
+	  fi \
 	else \
-	  echo 'echo Using shipped $@'; \
+	  if [ -f $(CONFIG_INITRAMFS_SOURCE) -a \
+	       $(CONFIG_INITRAMFS_SOURCE) != "$(obj)/$(initramfs_list)" ]; \
+	  then \
+	    if [ ! -f "$(obj)/$(initramfs_list)" -o \
+	         $(CONFIG_INITRAMFS_SOURCE) -nt "$(obj)/$(initramfs_list)" ]; \
+	    then \
+	      echo 'cp -f $(CONFIG_INITRAMFS_SOURCE) "$(obj)/$(initramfs_list)"'; \
+	    else \
+	      echo 'uptodate'; \
+	    fi \
+	  else \
+	    if [ -f "$(srctree)/$(src)/$(initramfs_list).shipped" ]; \
+	    then \
+	      if [ ! -f "$(obj)/$(initramfs_list)" -o \
+	           "$(srctree)/$(src)/$(initramfs_list).shipped" -nt "$(obj)/$(initramfs_list)" ]; \
+	      then \
+	        echo 'cp -f "$(srctree)/$(src)/$(initramfs_list).shipped" \
+	          "$(obj)/$(initramfs_list)"'; \
+	      else \
+	        echo 'uptodate'; \
+	      fi \
+	    else \
+	      echo 'missing'; \
+	    fi \
+	  fi \
 	fi)
 
-
-$(INITRAMFS_LIST): FORCE
-	$(call cmd,gen_list)
+initramfs_list_state_uptodate :=
+initramfs_list_state_outofdate :=
+initramfs_list_state_missing :=
+
+ifeq ($(cmd_gen_list),uptodate)
+  initramfs_list_state_uptodate := 1
+else
+  ifeq ($(cmd_gen_list),missing)
+    initramfs_list_state_missing := 1
+  else
+    initramfs_list_state_outofdate := 1
+  endif
+endif
+
+$(obj)/$(initramfs_list): FORCE
+	$(if $(initramfs_list_state_uptodate),, \
+	  $(if $(initramfs_list_state_outofdate), $(call cmd,gen_list), \
+	    $(if $(initramfs_list_state_missing), \
+	      @echo 'File "$(src)/$(initramfs_list).shipped" does not exist'; \
+	      /bin/false)))
 
 quiet_cmd_cpio = CPIO    $@
-      cmd_cpio = ./$< $(INITRAMFS_LIST) > $@
+      cmd_cpio = ./$< $(obj)/$(initramfs_list) > $@
 
-$(obj)/initramfs_data.cpio: $(obj)/gen_init_cpio $(initramfs-y) $(INITRAMFS_LIST) FORCE
+$(obj)/initramfs_data.cpio: $(obj)/gen_init_cpio $(initramfs-y) $(obj)/$(initramfs_list) FORCE
 	$(call if_changed,cpio)
 
 targets += initramfs_data.cpio
diff -uprN -X dontdiff linux-2.6.9-bk7.orig/usr/initramfs_list linux-2.6.9-bk7/usr/initramfs_list
--- linux-2.6.9-bk7.orig/usr/initramfs_list	2004-10-23 11:23:54.000000000 +0200
+++ linux-2.6.9-bk7/usr/initramfs_list	1970-01-01 02:00:00.000000000 +0200
@@ -1,5 +0,0 @@
-# This is a very simple initramfs - mostly preliminary for future expansion
-
-dir /dev 0755 0 0
-nod /dev/console 0600 0 0 c 5 1
-dir /root 0700 0 0
diff -uprN -X dontdiff linux-2.6.9-bk7.orig/usr/initramfs_list.shipped linux-2.6.9-bk7/usr/initramfs_list.shipped
--- linux-2.6.9-bk7.orig/usr/initramfs_list.shipped	1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.9-bk7/usr/initramfs_list.shipped	2004-10-23 11:26:52.000000000 +0200
@@ -0,0 +1,5 @@
+# This is a very simple initramfs - mostly preliminary for future expansion
+
+dir /dev 0755 0 0
+nod /dev/console 0600 0 0 c 5 1
+dir /root 0700 0 0

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

  reply	other threads:[~2004-10-24 14:00 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <200410200849.i9K8n5921516@mail.osdl.org>
2004-10-23 12:06 ` Martin Schlemmer [c]
2004-10-24 10:08   ` Andrew Morton
2004-10-24 13:59     ` Martin Schlemmer [c] [this message]
2004-10-24 22:26     ` Sam Ravnborg
2004-10-26 22:12   ` Sam Ravnborg
2004-10-26 21:07     ` Martin Schlemmer [c]
2004-10-26 23:15       ` Sam Ravnborg
2004-10-26 21:36         ` Martin Schlemmer [c]
2004-10-27  4:09         ` Dave Airlie
2004-10-27  6:21           ` Sam Ravnborg
2004-10-27  4:55             ` timestamps in kernel was " Dave Airlie
2004-10-27 18:44         ` Martin Schlemmer [c]
2004-10-30 23:43           ` Sam Ravnborg
2004-10-31 10:36             ` Martin Schlemmer [c]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1098626362.12420.3.camel@nosferatu.lan \
    --to=azarah@nosferatu.za.org \
    --cc=akpm@osdl.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sam@ravnborg.org \
    --cc=torvalds@osdl.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome