From: Andrew Cooks <andrew.cooks@opengear.com>
To: jdelvare@suse.com, linux-i2c@vger.kernel.org
Cc: platypus-sw@opengear.com,
Andrew Cooks <andrew.cooks@opengear.com>,
Wolfram Sang <wsa@the-dreams.de>,
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v2 2/3] i2c: piix4: fix number of SMBus ports on HUDSON2
Date: Thu, 14 Dec 2017 13:11:45 +1000 [thread overview]
Message-ID: <10a5f5d056511d07c1946d744fc84f243a6097cc.1513215039.git.andrew.cooks@opengear.com> (raw)
In-Reply-To: <cover.1513215039.git.andrew.cooks@opengear.com>
This prevents bus timeouts and resets on Hudson2 (Family 16h Models
30h), when probing reserved Port 4.
According to the AMD BIOS and Kernel Developer's Guides (BKDG), Port 3
and Port 4 are reserved on the following devices:
- Family 15h Model 60h-6Fh,
- Family 15h Model 70h-7Fh,
- Family 16h Models 30h-3Fh,
Signed-off-by: Andrew Cooks <andrew.cooks@opengear.com>
---
drivers/i2c/busses/i2c-piix4.c | 31 ++++++++++++++++++++++---------
1 file changed, 22 insertions(+), 9 deletions(-)
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index b92ea5d..cc38dc3 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -82,6 +82,13 @@
/* Multi-port constants */
#define PIIX4_MAX_ADAPTERS 4
+/*
+ * Main adapter port count. At least one (Port 0) plus up to 3 additional
+ * (Ports 2-4)
+ */
+#define SB800_MAIN_PORTS 4
+#define HUDSON2_MAIN_PORTS 2 /* HUDSON2, reserves Port 3 and Port 4 */
+
/* SB800 constants */
#define SB800_PIIX4_SMB_IDX 0xcd6
@@ -802,6 +809,7 @@ MODULE_DEVICE_TABLE (pci, piix4_ids);
static struct i2c_adapter *piix4_main_adapters[PIIX4_MAX_ADAPTERS];
static struct i2c_adapter *piix4_aux_adapter;
+static int piix4_adapter_count;
static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
bool sb800_main, u8 port, bool notify_imc,
@@ -858,10 +866,17 @@ static int piix4_add_adapters_sb800(struct pci_dev *dev, unsigned short smba,
bool notify_imc)
{
struct i2c_piix4_adapdata *adapdata;
- int port;
+ int port, port_count;
int retval;
- for (port = 0; port < PIIX4_MAX_ADAPTERS; port++) {
+ if (dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS ||
+ dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) {
+ port_count = HUDSON2_MAIN_PORTS;
+ } else {
+ port_count = SB800_MAIN_PORTS;
+ }
+
+ for (port = 0; port < port_count; port++) {
retval = piix4_add_adapter(dev, smba, true, port, notify_imc,
piix4_main_port_names_sb800[port],
&piix4_main_adapters[port]);
@@ -874,7 +889,7 @@ static int piix4_add_adapters_sb800(struct pci_dev *dev, unsigned short smba,
error:
dev_err(&dev->dev,
"Error setting up SB800 adapters. Unregistering!\n");
- while (--port >= 0) {
+ while (--piix4_adapter_count >= 0) {
adapdata = i2c_get_adapdata(piix4_main_adapters[port]);
if (adapdata->smba) {
i2c_del_adapter(piix4_main_adapters[port]);
@@ -995,12 +1010,10 @@ static void piix4_adap_remove(struct i2c_adapter *adap)
static void piix4_remove(struct pci_dev *dev)
{
- int port = PIIX4_MAX_ADAPTERS;
-
- while (--port >= 0) {
- if (piix4_main_adapters[port]) {
- piix4_adap_remove(piix4_main_adapters[port]);
- piix4_main_adapters[port] = NULL;
+ while (--piix4_adapter_count >= 0) {
+ if (piix4_main_adapters[piix4_adapter_count]) {
+ piix4_adap_remove(piix4_main_adapters[piix4_adapter_count]);
+ piix4_main_adapters[piix4_adapter_count] = NULL;
}
}
--
2.7.4
next prev parent reply other threads:[~2017-12-14 3:12 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-29 3:54 [PATCH v3 0/3] Enable ACPI-defined peripherals on i2c-piix4 SMBus Andrew Cooks
2017-12-14 3:11 ` [PATCH v2 1/3] i2c: piix4: Fix SMBus port selection for AMD Family 16h chips Andrew Cooks
2017-12-14 23:58 ` Andrew Cooks
2017-12-14 3:11 ` Andrew Cooks [this message]
2017-12-14 3:11 ` [PATCH v2 3/3] i2c: add ACPI support for i2c-piix4 Andrew Cooks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=10a5f5d056511d07c1946d744fc84f243a6097cc.1513215039.git.andrew.cooks@opengear.com \
--to=andrew.cooks@opengear.com \
--cc=jdelvare@suse.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=platypus-sw@opengear.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®