Re: [PATCH v3 3/3] spi: acpi: Initialize modalias from of_compatible

["Dan O'Donovan" <dan@emutex.com>]

On 01/23/2017 05:11 PM, Andy Shevchenko wrote:
> On Mon, Jan 23, 2017 at 6:08 PM, Dan O'Donovan <dan@emutex.com> wrote:
>> From: Crestez Dan Leonard <leonard.crestez@intel.com>
>>
>> When using devicetree spi_device.modalias is set to the compatible
>> string with the vendor prefix removed. For SPI devices described via
>> ACPI the spi_device.modalias string is initialized by acpi_device_hid.
>> When using ACPI and DT ids this string ends up something like "PRP0001".
>>
>> Change acpi_register_spi_device to use the of_compatible property if
>> present. This makes it easier to instantiate spi drivers through ACPI
>> with DT ids.
>> +       /*
>> +        * Populate modalias from compatible property if available,
>> +        * otherwise use native ACPI information
>> +        */
>> +       if ((!adev->data.of_compatible) ||
>> +           acpi_of_modalias(adev, spi->modalias, sizeof(spi->modalias)))
> Same comment as in patch 2.
Thanks for the feedback, Andy.  The check on of_compatible is redundant,
because its repeated in acpi_of_modalias(), so I'll remove it here (and
in patch 2) to reduce this to one line.  v4 on the way.
>> +               strlcpy(spi->modalias, acpi_device_hid(adev),
>> +                       sizeof(spi->modalias));
> Could this be one line?
I couldn't see a way to reduce this to one line without exceeding 80
chars or adding another line somewhere else, so I'll leave this one as
it is if that's ok.