mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Rajat Jain <rajatjain@juniper.net>
To: Takashi Iwai <tiwai@suse.de>, Bjorn Helgaas <bhelgaas@google.com>
Cc: Alex Williamson <alex.williamson@redhat.com>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: RE: [PATCH] PCI: pciehp: Remove surprise bit checks
Date: Tue, 11 Feb 2014 18:52:30 +0000	[thread overview]
Message-ID: <1117e550ec6248e3a1834f887cbfdfad@DM2PR05MB671.namprd05.prod.outlook.com> (raw)
In-Reply-To: <s5hmwhx98vx.wl%tiwai@suse.de>

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 4424 bytes --]

Hello Takashi,

> -----Original Message-----
> From: linux-pci-owner@vger.kernel.org [mailto:linux-pci-
> owner@vger.kernel.org] On Behalf Of Takashi Iwai
> Sent: Tuesday, February 11, 2014 3:39 AM
> To: Bjorn Helgaas
> Cc: Alex Williamson; linux-pci@vger.kernel.org; linux-
> kernel@vger.kernel.org
> Subject: [PATCH] PCI: pciehp: Remove surprise bit checks
> 
> Currently pciehp driver checks the surprise removal bit and handles
> the hotplug event only when the bit is set.  But there are devices
> that don't set that bit but yet expect the hotplug working, e.g. the
> PCI card reader on HP ProBook 445 and 455 laptops appears only when
> you insert a card, and it needs the hotplug event handling.
> 
> For fixing this, basically we may ignore the surprise bit and always
> handle the event.

Some of this has been taken care of in the recent changes to pciehcp (last night).

Please see

https://git.kernel.org/cgit/linux/kernel/git/helgaas/pci.git/commit/?h=pci/pciehp&id=a3eba3887960d00abb912fe3703cd3a058c721b8

Also, link state hotplug has been added as part of this patch set. Can you please try with Bjorn's latest pci tree?

With that, I think you should not see the issue you are describing, because if the PCIe Link comes up when you insert the card, it shall be added (now) irrespective of whether or not you have the surprise bit set.

Thanks,

Rajat


> The only big concern in the past was the KVM device
> assignment, but this has been fixed in KVM side (ignoring hotplug
> events during secondary bus resets), there should be no obstacle
> ahead.
> 
> The earlier discussion thread is found at:
>     https://lkml.org/lkml/2013/3/20/274
> 
> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70261
> Signed-off-by: Takashi Iwai <tiwai@suse.de>
> ---
>  drivers/pci/hotplug/pciehp_ctrl.c | 11 -----------
>  drivers/pci/hotplug/pciehp_hpc.c  | 19 +++++++------------
>  2 files changed, 7 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/pci/hotplug/pciehp_ctrl.c
> b/drivers/pci/hotplug/pciehp_ctrl.c
> index 50628487597d..8f6c626b4e21 100644
> --- a/drivers/pci/hotplug/pciehp_ctrl.c
> +++ b/drivers/pci/hotplug/pciehp_ctrl.c
> @@ -434,8 +434,6 @@ static void interrupt_event_handler(struct
> work_struct *work)
>  		break;
>  	case INT_PRESENCE_ON:
>  	case INT_PRESENCE_OFF:
> -		if (!HP_SUPR_RM(ctrl))
> -			break;
>  		ctrl_dbg(ctrl, "Surprise Removal\n");
>  		handle_surprise_event(p_slot);
>  		break;
> @@ -494,15 +492,6 @@ int pciehp_disable_slot(struct slot *p_slot)
>  	if (!p_slot->ctrl)
>  		return 1;
> 
> -	if (!HP_SUPR_RM(p_slot->ctrl)) {
> -		pciehp_get_adapter_status(p_slot, &getstatus);
> -		if (!getstatus) {
> -			ctrl_info(ctrl, "No adapter on slot(%s)\n",
> -				  slot_name(p_slot));
> -			return -ENODEV;
> -		}
> -	}
> -
>  	if (MRL_SENS(p_slot->ctrl)) {
>  		pciehp_get_latch_status(p_slot, &getstatus);
>  		if (getstatus) {
> diff --git a/drivers/pci/hotplug/pciehp_hpc.c
> b/drivers/pci/hotplug/pciehp_hpc.c
> index 14acfccb7670..5f9196a85a53 100644
> --- a/drivers/pci/hotplug/pciehp_hpc.c
> +++ b/drivers/pci/hotplug/pciehp_hpc.c
> @@ -636,21 +636,16 @@ int pciehp_reset_slot(struct slot *slot, int
> probe)
>  	if (probe)
>  		return 0;
> 
> -	if (HP_SUPR_RM(ctrl)) {
> -		pcie_write_cmd(ctrl, 0, PCI_EXP_SLTCTL_PDCE);
> -		if (pciehp_poll_mode)
> -			del_timer_sync(&ctrl->poll_timer);
> -	}
> +	pcie_write_cmd(ctrl, 0, PCI_EXP_SLTCTL_PDCE);
> +	if (pciehp_poll_mode)
> +		del_timer_sync(&ctrl->poll_timer);
> 
>  	pci_reset_bridge_secondary_bus(ctrl->pcie->port);
> 
> -	if (HP_SUPR_RM(ctrl)) {
> -		pcie_capability_write_word(pdev, PCI_EXP_SLTSTA,
> -					   PCI_EXP_SLTSTA_PDC);
> -		pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PDCE,
> PCI_EXP_SLTCTL_PDCE);
> -		if (pciehp_poll_mode)
> -			int_poll_timeout(ctrl->poll_timer.data);
> -	}
> +	pcie_capability_write_word(pdev, PCI_EXP_SLTSTA,
> PCI_EXP_SLTSTA_PDC);
> +	pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PDCE, PCI_EXP_SLTCTL_PDCE);
> +	if (pciehp_poll_mode)
> +		int_poll_timeout(ctrl->poll_timer.data);
> 
>  	return 0;
>  }
> --
> 1.8.5.2
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥

  reply	other threads:[~2014-02-11 18:52 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-11 11:38 Takashi Iwai
2014-02-11 18:52 ` Rajat Jain [this message]
2014-02-11 23:18   ` Bjorn Helgaas
2014-02-12 12:54     ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1117e550ec6248e3a1834f887cbfdfad@DM2PR05MB671.namprd05.prod.outlook.com \
    --to=rajatjain@juniper.net \
    --cc=alex.williamson@redhat.com \
    --cc=bhelgaas@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®