From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932481AbVHRVwe (ORCPT ); Thu, 18 Aug 2005 17:52:34 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932484AbVHRVwe (ORCPT ); Thu, 18 Aug 2005 17:52:34 -0400 Received: from iron.pdx.net ([207.149.241.18]:26061 "EHLO iron.pdx.net") by vger.kernel.org with ESMTP id S932481AbVHRVwd (ORCPT ); Thu, 18 Aug 2005 17:52:33 -0400 Subject: 2.6.13-rc6-git10 test report [x86_64] From: Sean Bruno To: linux-kernel@vger.kernel.org Content-Type: multipart/mixed; boundary="=-qekd5Lpu036QUCQwBOd0" Date: Thu, 18 Aug 2005 14:52:30 -0700 Message-Id: <1124401950.14825.13.camel@home-lap> Mime-Version: 1.0 X-Mailer: Evolution 2.2.3 (2.2.3-2.fc4) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org --=-qekd5Lpu036QUCQwBOd0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Just finished building the latest git for my dual-opteron box(ASUS K8N-DL with 6GB Ram). No new issues noted, works about as well as 2.6.12 for me. ASUS still has not addressed their ACPI Table and I am doubtful that they ever will. In order to boot any kernel, I am disabling ACPI in the BIOS. If I enable ACPI, I now get a lock-up referencing the fact the machine has 6GB of RAM and no IOMMU. I have attached the "dmesg" of the boot with ACPI disabled if you folks are interested. Sean P.S. ASUS TechSupport is only slightly better than Belkin(Their KVM's suck) TechSupport! --=-qekd5Lpu036QUCQwBOd0 Content-Disposition: attachment; filename=dmesg.txt Content-Type: text/plain; name=dmesg.txt; charset=UTF-8 Content-Transfer-Encoding: 7bit Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol00 rhgb quiet iommu=memaper=3) Linux version 2.6.13-rc6-git10 (root@home-desk) (gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) #1 SMP Thu Aug 18 13:52:20 PDT 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e400 (usable) BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000c0000000 (usable) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 00000001c0000000 (usable) ACPI: Unable to locate RSDP Scanning NUMA topology in Northbridge 24 Number of nodes 2 Node 0 MemBase 0000000000000000 Limit 000000013fffffff Node 1 MemBase 0000000140000000 Limit 00000001bfffffff Using 25 for the hash shift. Max adder is 1bfffffff Using node hash shift of 25 Bootmem setup node 0 0000000000000000-000000013fffffff Bootmem setup node 1 0000000140000000-00000001bfffffff On node 0 totalpages: 1310719 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 1306623 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 On node 1 totalpages: 524287 DMA zone: 0 pages, LIFO batch:1 Normal zone: 524287 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 Nvidia board detected. Ignoring ACPI timer override. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 <6>Product ID: PROD00000000 <6>APIC at: 0xFEE00000 Processor #0 15:5 APIC version 17 Processor #1 15:5 APIC version 17 I/O APIC #4 Version 17 at 0xFEC00000. Setting APIC routing to flat Processors: 2 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) Checking aperture... CPU 0: aperture @ 10000000 size 32 MB Aperture from northbridge cpu 0 too small (32 MB) Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 256 MB of RAM Mapping aperture over 262144 KB of RAM @ 10000000 Built 2 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet iommu=memaper=3 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 1.193182 MHz PIT timer. time.c: Detected 2010.311 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Memory: 5908512k/7340032k available (2448k kernel code, 0k reserved, 1303k data, 224k init) Calibrating delay using timer specific routine.. 4024.90 BogoMIPS (lpj=8049811) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0(1) -> Node 0 -> Core 0 mtrr: v2.0 (20020519) Using IO-APIC 4 ..MP-BIOS bug: 8254 timer not connected to IO-APIC works. Using local APIC timer interrupts. Detected 12.564 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4020.89 BogoMIPS (lpj=8041798) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1(1) -> Node 1 -> Core 0 AMD Opteron(tm) Processor 246 stepping 0a CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff -112 cycles, maxerr 788 cycles) Brought up 2 CPUs time.c: Using PIT/TSC based timekeeping. testing NMI watchdog ... OK. checking if image is initramfs... it is NET: Registered protocol family 16 PCI: Using configuration type 1 ACPI: Subsystem revision 20050408 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 Boot video device is 0000:04:00.0 PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 11 PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 9 PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 3 PCI->APIC IRQ transform: 0000:00:04.0[A] -> IRQ 5 PCI->APIC IRQ transform: 0000:00:07.0[A] -> IRQ 5 PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 11 PCI->APIC IRQ transform: 0000:01:08.0[A] -> IRQ 9 PCI->APIC IRQ transform: 0000:01:09.0[A] -> IRQ 3 PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 9 PCI->APIC IRQ transform: 0000:04:00.0[A] -> IRQ 11 PCI: Bridge: 0000:00:09.0 IO window: d000-dfff MEM window: fe800000-fe8fffff PREFETCH window: fe900000-fe9fffff PCI: Bridge: 0000:00:0c.0 IO window: c000-cfff MEM window: fe700000-fe7fffff PREFETCH window: fe600000-fe6fffff PCI: Bridge: 0000:00:0d.0 IO window: b000-bfff MEM window: fe500000-fe5fffff PREFETCH window: fe400000-fe4fffff PCI: Bridge: 0000:00:0e.0 IO window: a000-afff MEM window: fb000000-fdffffff PREFETCH window: d0000000-dfffffff PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 10000000 size 262144 KB PCI-DMA: Reserving 256MB of IOMMU area in the AGP aperture IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1124400632.648:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API pci_hotplug: PCI Hot Plug PCI Core version: 0.5 PCI: Setting latency timer of device 0000:00:0c.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] PCI: Setting latency timer of device 0000:00:0d.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] PCI: Setting latency timer of device 0000:00:0e.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 242 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller ide0: BM-DMA at 0xfa00-0xfa07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xfa08-0xfa0f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... Probing IDE interface ide1... hdc: Pioneer DVD-ROM ATAPIModel DVD-105S 013, ATAPI CD/DVD-ROM drive hdd: Polaroid BurnMAX48, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide0... hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 3.38 NET: Registered protocol family 2 input: AT Translated Set 2 keyboard on isa0060/serio0 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.50.3) powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: MP systems not supported by PSB BIOS structure Freeing unused kernel memory: 224k freed SCSI subsystem initialized libata version 1.11 loaded. sata_sil version 0.9 ata1: SATA max UDMA/100 cmd 0xFFFFC2000000E080 ctl 0xFFFFC2000000E08A bmdma 0xFFFFC2000000E000 irq 3 ata2: SATA max UDMA/100 cmd 0xFFFFC2000000E0C0 ctl 0xFFFFC2000000E0CA bmdma 0xFFFFC2000000E008 irq 3 ata3: SATA max UDMA/100 cmd 0xFFFFC2000000E280 ctl 0xFFFFC2000000E28A bmdma 0xFFFFC2000000E200 irq 3 ata4: SATA max UDMA/100 cmd 0xFFFFC2000000E2C0 ctl 0xFFFFC2000000E2CA bmdma 0xFFFFC2000000E208 irq 3 input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c68 86:3c01 87:4003 88:20ff ata1: dev 0 ATA, max UDMA7, 312581808 sectors: lba48 ata1: dev 0 configured for UDMA/100 scsi0 : sata_sil ata2: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003 88:20ff ata2: dev 0 ATA, max UDMA7, 312581808 sectors: lba48 ata2: dev 0 configured for UDMA/100 scsi1 : sata_sil ata3: no device found (phy stat 00000000) scsi2 : sata_sil ata4: no device found (phy stat 00000000) scsi3 : sata_sil Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sda: drive cache: write back SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sdb: drive cache: write back sdb: sdb1 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 sata_nv version 0.6 PCI: Setting latency timer of device 0000:00:07.0 to 64 ata5: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xF500 irq 5 ata6: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xF508 irq 5 ata5: no device found (phy stat 00000000) scsi4 : sata_nv ata6: no device found (phy stat 00000000) scsi5 : sata_nv PCI: Setting latency timer of device 0000:00:08.0 to 64 ata7: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xF000 irq 11 ata8: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xF008 irq 11 ata7: no device found (phy stat 00000000) scsi6 : sata_nv ata8: no device found (phy stat 00000000) scsi7 : sata_nv device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com cdrom: open failed. cdrom: open failed. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 tg3.c:v3.35 (August 6, 2005) PCI: Setting latency timer of device 0000:02:00.0 to 64 eth0: Tigon3 [partno(BCM95751) rev 4101 PHY(5750)] (PCIX:100MHz:32-bit) 10/100/1000BaseT Ethernet 00:11:d8:d3:08:05 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] PCI: Setting latency timer of device 0000:00:04.0 to 64 intel8x0_measure_ac97_clock: measured 58778 usecs intel8x0: clocking to 47023 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001 i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40 nvidia: module license 'NVIDIA' taints kernel. PCI: Setting latency timer of device 0000:04:00.0 to 64 NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module 1.0-7667 Fri Jun 17 07:14:03 PDT 2005 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: irq 3, io mem 0xfeb00000 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: park 0 ehci_hcd 0000:00:02.1: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 9, io mem 0xfeaff000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1299 $ Ben Collins ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[9] MMIO=[fe8ff000-fe8ff7ff] Max Packet=[2048] usb 2-3: new low speed USB device using ohci_hcd and address 2 input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.0-3 ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000277ca6] NET: Registered protocol family 10 Disabled Privacy Extensions on device ffffffff8045c3a0(lo) IPv6 over IPv4 tunneling driver audit(1124400650.993:2): user pid=1450 uid=0 auid=4294967295 msg='hwclock: op=changing system time id=0 res=success' md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. cdrom: open failed. cdrom: open failed. cdrom: open failed. cdrom: open failed. EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. parport0: PC-style at 0x378 [PCSPP,TRISTATE] lp0: using parport0 (polling). lp0: console ready eth0: no IPv6 routers present --=-qekd5Lpu036QUCQwBOd0--