From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Mike Kravetz <kravetz@us.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>,
linuxppc64-dev@ozlabs.org, linux-kernel@vger.kernel.org,
lhms-devel@lists.sourceforge.net
Subject: Re: [PATCH 1/4] Memory Add Fixes for ppc64
Date: Sat, 05 Nov 2005 11:04:30 +1100 [thread overview]
Message-ID: <1131149070.29195.41.camel@gaston> (raw)
In-Reply-To: <20051104231800.GB25545@w-mikek2.ibm.com>
On Fri, 2005-11-04 at 15:18 -0800, Mike Kravetz wrote:
> Add the create_section_mapping() routine to create hptes for memory
> sections dynamically added after system boot.
>
> Signed-off-by: Mike Kravetz <kravetz@us.ibm.com>
This patch will have to be slightly reworked on top of the 64k pages
one. It should be trivial though.
Ben.
> diff -Naupr linux-2.6.14-git7/arch/powerpc/mm/hash_utils_64.c linux-2.6.14-git7.work/arch/powerpc/mm/hash_utils_64.c
> --- linux-2.6.14-git7/arch/powerpc/mm/hash_utils_64.c 2005-11-04 21:21:05.000000000 +0000
> +++ linux-2.6.14-git7.work/arch/powerpc/mm/hash_utils_64.c 2005-11-04 22:05:06.000000000 +0000
> @@ -176,6 +176,15 @@ static unsigned long get_hashtable_size(
> return pteg_count << 7;
> }
>
> +#ifdef CONFIG_MEMORY_HOTPLUG
> +void create_section_mapping(unsigned long start, unsigned long end)
> +{
> + create_pte_mapping(start, end,
> + _PAGE_ACCESSED | _PAGE_COHERENT | PP_RWXX,
> + cur_cpu_spec->cpu_features & CPU_FTR_16M_PAGE ? 1 : 0);
> +}
> +#endif /* CONFIG_MEMORY_HOTPLUG */
> +
> void __init htab_initialize(void)
> {
> unsigned long table, htab_size_bytes;
> diff -Naupr linux-2.6.14-git7/arch/powerpc/mm/mem.c linux-2.6.14-git7.work/arch/powerpc/mm/mem.c
> --- linux-2.6.14-git7/arch/powerpc/mm/mem.c 2005-11-04 21:21:05.000000000 +0000
> +++ linux-2.6.14-git7.work/arch/powerpc/mm/mem.c 2005-11-04 22:05:06.000000000 +0000
> @@ -124,6 +124,9 @@ int __devinit add_memory(u64 start, u64
> unsigned long start_pfn = start >> PAGE_SHIFT;
> unsigned long nr_pages = size >> PAGE_SHIFT;
>
> + start += KERNELBASE;
> + create_section_mapping(start, start + size);
> +
> /* this should work for most non-highmem platforms */
> zone = pgdata->node_zones;
>
> diff -Naupr linux-2.6.14-git7/include/asm-ppc64/sparsemem.h linux-2.6.14-git7.work/include/asm-ppc64/sparsemem.h
> --- linux-2.6.14-git7/include/asm-ppc64/sparsemem.h 2005-10-28 00:02:08.000000000 +0000
> +++ linux-2.6.14-git7.work/include/asm-ppc64/sparsemem.h 2005-11-04 22:05:06.000000000 +0000
> @@ -11,6 +11,10 @@
> #define MAX_PHYSADDR_BITS 38
> #define MAX_PHYSMEM_BITS 36
>
> +#ifdef CONFIG_MEMORY_HOTPLUG
> +extern void create_section_mapping(unsigned long start, unsigned long end);
> +#endif /* CONFIG_MEMORY_HOTPLUG */
> +
> #endif /* CONFIG_SPARSEMEM */
>
> #endif /* _ASM_PPC64_SPARSEMEM_H */
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2005-11-05 0:06 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-04 23:15 [PATCH 0/4] " Mike Kravetz
2005-11-04 23:18 ` [PATCH 1/4] " Mike Kravetz
2005-11-05 0:04 ` Benjamin Herrenschmidt [this message]
2005-11-05 0:35 ` Mike Kravetz
2005-11-05 0:43 ` Benjamin Herrenschmidt
2005-11-07 20:47 ` Mike Kravetz
2005-11-07 21:12 ` Benjamin Herrenschmidt
2005-11-07 21:48 ` Mike Kravetz
2005-11-08 0:35 ` Benjamin Herrenschmidt
2005-11-08 14:51 ` Andy Whitcroft
2005-11-08 0:25 ` [PATCH 1/4] revised " Mike Kravetz
2005-11-08 2:07 ` Paul Mackerras
2005-11-08 3:02 ` Mike Kravetz
2005-11-04 23:19 ` [PATCH 2/4] " Mike Kravetz
2005-11-04 23:20 ` [PATCH 3/4] " Mike Kravetz
2005-11-04 23:21 ` [PATCH 4/4] " Mike Kravetz
2005-11-07 0:59 ` Paul Mackerras
2005-11-07 17:39 ` Mike Kravetz
2005-11-08 0:39 ` [PATCH 0/4] " Anton Blanchard
2005-11-08 0:48 ` Mike Kravetz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1131149070.29195.41.camel@gaston \
--to=benh@kernel.crashing.org \
--cc=kravetz@us.ibm.com \
--cc=lhms-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc64-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome