mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: linux-kernel@vger.kernel.org, jgarzik@pobox.com
Subject: PATCH: Update the AMD driver to support the AMD CS5536. Also add enablebit support
Date: Tue, 08 Nov 2005 14:12:22 +0000	[thread overview]
Message-ID: <1131459142.25192.36.camel@localhost.localdomain> (raw)

This brings it back into line with the drivers/ide code. The full 5536
PCI identifiers are included. Trim to preference obviously

Signed-off-by: Alan Cox <alan@redhat.com>

diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.14-mm1/drivers/scsi/pata_amd.c linux-2.6.14-mm1/drivers/scsi/pata_amd.c
--- linux.vanilla-2.6.14-mm1/drivers/scsi/pata_amd.c	2005-11-07 13:06:24.000000000 +0000
+++ linux-2.6.14-mm1/drivers/scsi/pata_amd.c	2005-11-07 15:32:57.000000000 +0000
@@ -30,7 +30,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_amd"
-#define DRV_VERSION "0.1"
+#define DRV_VERSION "0.1.2"
 
 /**
  *	timing_setup		-	shared timing computation and load
@@ -147,6 +147,17 @@
 
 static void amd_phy_reset(struct ata_port *ap)
 {
+	struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
+	static struct pci_bits amd_enable_bits[] = {
+		{ 0x40, 0x02, 0x02 },
+		{ 0x40, 0x01, 0x01 }
+	};
+
+	if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->hard_port_no])) {
+		ata_port_disable(ap);
+		printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
+		return;
+	}
 	ap->cbl = amd_cable_detect(ap);
 	ata_bus_reset(ap);
 	ata_port_probe(ap);
@@ -471,7 +482,7 @@
 
 static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
-	static struct ata_port_info info[9] = {
+	static struct ata_port_info info[10] = {
 		{	/* 0: AMD 7401 */
 			.sht = &amd_sht,
 			.host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
@@ -543,6 +554,14 @@
 			.mwdma_mask = 0x07,
 			.udma_mask = 0x7f,	/* UDMA 133, no swdma */
 			.port_ops = &nv133_port_ops
+		},
+		{	/* 9: AMD CS5536 (Geode companion) */
+			.sht = &amd_sht,
+			.host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.pio_mask = 0x1f,
+			.mwdma_mask = 0x07,
+			.udma_mask = 0x3f,	/* UDMA 100 */
+			.port_ops = &amd100_port_ops
 		}
 	};
 	static struct ata_port_info *port_info[2];
@@ -590,6 +609,7 @@
 	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 },
 	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 },
 	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 },
+	{ PCI_VENDOR_ID_AMD,	PCI_DEVICE_ID_AMD_CS5536_IDE,		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 9 },
 	{ 0, },
 };
 
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.14-mm1/include/linux/pci_ids.h linux-2.6.14-mm1/include/linux/pci_ids.h
--- linux.vanilla-2.6.14-mm1/include/linux/pci_ids.h	2005-11-07 13:06:25.000000000 +0000
+++ linux-2.6.14-mm1/include/linux/pci_ids.h	2005-11-07 13:53:12.000000000 +0000
@@ -490,6 +490,14 @@
 #define PCI_DEVICE_ID_AMD_8111_AUDIO	0x746d
 #define PCI_DEVICE_ID_AMD_8151_0	0x7454
 #define PCI_DEVICE_ID_AMD_8131_APIC     0x7450
+#define PCI_DEVICE_ID_AMD_CS5536_ISA    0x2090
+#define PCI_DEVICE_ID_AMD_CS5536_FLASH  0x2091
+#define PCI_DEVICE_ID_AMD_CS5536_AUDIO  0x2093
+#define PCI_DEVICE_ID_AMD_CS5536_OHC    0x2094
+#define PCI_DEVICE_ID_AMD_CS5536_EHC    0x2095
+#define PCI_DEVICE_ID_AMD_CS5536_UDC    0x2096
+#define PCI_DEVICE_ID_AMD_CS5536_UOC    0x2097
+#define PCI_DEVICE_ID_AMD_CS5536_IDE    0x209A
 
 #define PCI_VENDOR_ID_TRIDENT		0x1023
 #define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX	0x2000


             reply	other threads:[~2005-11-08 13:41 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-11-08 14:12 Alan Cox [this message]
2005-11-09  6:08 ` Jeff Garzik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1131459142.25192.36.camel@localhost.localdomain \
    --to=alan@lxorguk.ukuu.org.uk \
    --cc=jgarzik@pobox.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®