From: "Ardelean, Alexandru" <alexandru.Ardelean@analog.com>
To: "rafal.hibner@secom.com.pl" <rafal.hibner@secom.com.pl>
Cc: "linux-spi@vger.kernel.org" <linux-spi@vger.kernel.org>,
"broonie@kernel.org" <broonie@kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] spi: spi-axi-spi-engine: Access register after clock initialization
Date: Thu, 9 Apr 2020 17:22:48 +0000 [thread overview]
Message-ID: <1135f49cdef0313edaf366ddaa60600472566199.camel@analog.com> (raw)
In-Reply-To: <20200409155621.12174-1-rafal.hibner@secom.com.pl>
On Thu, 2020-04-09 at 17:56 +0200, Rafał Hibner wrote:
> [External]
>
> Move register access after clock initialization.
> Clock "s_axi_aclk" is needed for register access. Without the clock running
> AXI bus hangs and causes kernel freeze.
this patch should have been marked as V2
the easiest way to apply V2 tags, is to run 'git format-patch -v2'
[or -v3 for 3rd version]
no idea if you need to re-send this;
i guess it's up to the maintainer;
maybe try to remember this when re-sending patches, each re-send is an increment
also, it's a good idea to add a changelog right after the --- line
that line doesn't get applied;
other than that:
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
>
> Cc: Alexandru Ardelean <alexandru.ardelean@analog.com>
> Signed-off-by: Rafał Hibner <rafal.hibner@secom.com.pl>
> ---
so here, something like:
Changelog v1 -> v2:
* re-send in plain-text format
> drivers/spi/spi-axi-spi-engine.c | 32 ++++++++++++++++----------------
> 1 file changed, 16 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/spi/spi-axi-spi-engine.c b/drivers/spi/spi-axi-spi-
> engine.c
> index eb9b78a90d..af86e6d6e1 100644
> --- a/drivers/spi/spi-axi-spi-engine.c
> +++ b/drivers/spi/spi-axi-spi-engine.c
> @@ -489,22 +489,6 @@ static int spi_engine_probe(struct platform_device *pdev)
>
> spin_lock_init(&spi_engine->lock);
>
> - spi_engine->base = devm_platform_ioremap_resource(pdev, 0);
> - if (IS_ERR(spi_engine->base)) {
> - ret = PTR_ERR(spi_engine->base);
> - goto err_put_master;
> - }
> -
> - version = readl(spi_engine->base + SPI_ENGINE_REG_VERSION);
> - if (SPI_ENGINE_VERSION_MAJOR(version) != 1) {
> - dev_err(&pdev->dev, "Unsupported peripheral version %u.%u.%c\n",
> - SPI_ENGINE_VERSION_MAJOR(version),
> - SPI_ENGINE_VERSION_MINOR(version),
> - SPI_ENGINE_VERSION_PATCH(version));
> - ret = -ENODEV;
> - goto err_put_master;
> - }
> -
> spi_engine->clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
> if (IS_ERR(spi_engine->clk)) {
> ret = PTR_ERR(spi_engine->clk);
> @@ -525,6 +509,22 @@ static int spi_engine_probe(struct platform_device *pdev)
> if (ret)
> goto err_clk_disable;
>
> + spi_engine->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(spi_engine->base)) {
> + ret = PTR_ERR(spi_engine->base);
> + goto err_ref_clk_disable;
> + }
> +
> + version = readl(spi_engine->base + SPI_ENGINE_REG_VERSION);
> + if (SPI_ENGINE_VERSION_MAJOR(version) != 1) {
> + dev_err(&pdev->dev, "Unsupported peripheral version %u.%u.%c\n",
> + SPI_ENGINE_VERSION_MAJOR(version),
> + SPI_ENGINE_VERSION_MINOR(version),
> + SPI_ENGINE_VERSION_PATCH(version));
> + ret = -ENODEV;
> + goto err_ref_clk_disable;
> + }
> +
> writel_relaxed(0x00, spi_engine->base + SPI_ENGINE_REG_RESET);
> writel_relaxed(0xff, spi_engine->base + SPI_ENGINE_REG_INT_PENDING);
> writel_relaxed(0x00, spi_engine->base + SPI_ENGINE_REG_INT_ENABLE);
next prev parent reply other threads:[~2020-04-09 17:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-09 15:56 Rafał Hibner
2020-04-09 17:22 ` Ardelean, Alexandru [this message]
[not found] <67f644c1-a0cf-4897-a66a-e2ad4b11140d@secom.com.pl>
2020-04-09 15:26 ` Ardelean, Alexandru
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1135f49cdef0313edaf366ddaa60600472566199.camel@analog.com \
--to=alexandru.ardelean@analog.com \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=rafal.hibner@secom.com.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®