mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Michael Thonke" <TK-SHOCKWAVE@web.de>
To: linux-kernel@vger.kernel.org
Subject: NForce3 SATA badness with remove/add devices
Date: Sun, 31 Oct 2004 02:07:38 +0200	[thread overview]
Message-ID: <1137352821@web.de> (raw)

[-- Attachment #1: Type: text/plain, Size: 6233 bytes --]

Hello Jeff or someone who read this,


its my 3 attemp (LKML Post 0410.2/0129l) to get a answer to following thing.
First of all I'm using a NForce 3 250GB (MSI K8N Neo2 Platinum)
With 3 SATA disks
Maxtor  6B200M/NCQ 
2xSamsung SP1213C

My Problem is when the kernel starts with libsata and sata_nv compiled in
when I boot the System with libsata and sata_nv it removes the first disk (Maxtor 6B200B)
then a abnormal timeout occur while adding the device: this message appears
error is "ATA: abnormal status 0x0D on port 0x9E7" and "ata is to slow to answer"
now the corious thing on that is if I wait 40 or 50 sec maybe it work or maybe not..
when I'm using the old "CONFIG_BLK_DEV_IDE_SATA:"
everything works great here. I dont know whats wrong but i tested it on 5 Motherboard 
there the Maxtor working without hicks (VIA KT880Pro,i875P,i925,SIS755,Promise 378 SATA TX2,
but when I plug it on a NForce 3 250GB (MSI K8N Neo2 or Gigabyte K8NSNXP or even new MSI K8N Neo2) 
the same timeout occur..the Maxtor 6B200M is SATA2 but full SATA compatible. 
I thought it is because of hotplug support but disabling all this stuff did not work.
I hope someone know why this happen and how to fix this.

Thanks for help

here are the lspci -v output

0000:00:00.0 Host bridge: nVidia Corporation: Unknown device 00e1 (rev a1)
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 0250
        Flags: bus master, 66Mhz, fast devsel, latency 0
        Memory at d0000000 (32-bit, prefetchable)
        Capabilities: [44] #08 [01c0]
        Capabilities: [c0] AGP version 3.0

0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 00e0 (rev a2)
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 0250
        Flags: bus master, 66Mhz, fast devsel, latency 0

0000:00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management (rev a1)
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 0250
        Flags: 66Mhz, fast devsel, IRQ 177
        I/O ports at ec00
        I/O ports at 4c00 [size=64]
        I/O ports at 4c40 [size=64]
        Capabilities: [44] Power Management version 2

0000:00:05.0 Bridge: nVidia Corporation CK8S Ethernet Controller (rev a2)
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 0250
        Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 177
        Memory at ec000000 (32-bit, non-prefetchable)
        I/O ports at a800 [size=8]
        Capabilities: [44] Power Management version 2

0000:00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller (v2.5) (rev a2) (prog-if 8a [Master SecP PriP])
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 0250
        Flags: bus master, 66Mhz, fast devsel, latency 0
        I/O ports at f000 [size=16]
        Capabilities: [44] Power Management version 2

0000:00:09.0 IDE interface: nVidia Corporation CK8S Serial ATA Controller (v2.5) (rev a2) (prog-if 85 [Master SecO PriO])
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 0250
        Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 193
        I/O ports at 09e0
        I/O ports at 0be0 [size=4]
        I/O ports at 0960 [size=8]
        I/O ports at 0b60 [size=4]
        I/O ports at cc00 [size=16]
        I/O ports at d000 [size=128]
        Capabilities: [44] Power Management version 2

0000:00:0a.0 IDE interface: nVidia Corporation CK8S Serial ATA Controller (v2.5) (rev a2) (prog-if 85 [Master SecO PriO])
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 0250
        Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 201
        I/O ports at 09f0
        I/O ports at 0bf0 [size=4]
        I/O ports at 0970 [size=8]
        I/O ports at 0b70 [size=4]
        I/O ports at e400 [size=16]
        I/O ports at e800 [size=128]
        Capabilities: [44] Power Management version 2

0000:00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2) (prog-if 00 [Normal decode])
        Flags: bus master, 66Mhz, medium devsel, latency 16
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=10
        Memory behind bridge: e8000000-e9ffffff
        Prefetchable memory behind bridge: e0000000-e7ffffff

0000:00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2) (prog-if 00 [Normal decode])
        Flags: bus master, 66Mhz, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=128
        I/O behind bridge: 00009000-00009fff
        Memory behind bridge: ea000000-ebffffff
        Expansion ROM at 00009000 [disabled] [size=4K]

0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
        Flags: fast devsel
        Capabilities: [80] #08 [2101]

0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
        Flags: fast devsel

0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
        Flags: fast devsel

0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
        Flags: fast devsel

0000:01:00.0 VGA compatible controller: nVidia Corporation NV35 [GeForce FX 5900XT] (rev a1) (prog-if 00 [VGA])
        Subsystem: LeadTek Research Inc.: Unknown device 2975
        Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 209
        Memory at e8000000 (32-bit, non-prefetchable)
        Memory at e0000000 (32-bit, prefetchable) [size=128M]
        Capabilities: [60] Power Management version 2
        Capabilities: [44] AGP version 3.0

0000:02:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 025c
        Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 209
        I/O ports at 9000
        Memory at eb000000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [dc] Power Management version 2


________________________________________________________________
Verschicken Sie romantische, coole und witzige Bilder per SMS!
Jetzt neu bei WEB.DE FreeMail: http://freemail.web.de/?mc=021193

[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/x-pkcs7-signature, Size: 1440 bytes --]

             reply	other threads:[~2004-10-31  0:08 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-10-31  0:07 Michael Thonke [this message]
2004-11-01 20:35 Andrew Chew

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1137352821@web.de \
    --to=tk-shockwave@web.de \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome