From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: linux-kernel@vger.kernel.org, torvalds@osdl.org
Subject: PATCH: Remove enable.h from rio driver (unused file)
Date: Mon, 16 Jan 2006 16:49:15 +0000 [thread overview]
Message-ID: <1137430156.15553.12.camel@localhost.localdomain> (raw)
Signed-off-by: Alan Cox <alan@redhat.com>
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.15-git12/drivers/char/rio/eisa.h linux-2.6.15-git12/drivers/char/rio/eisa.h
--- linux.vanilla-2.6.15-git12/drivers/char/rio/eisa.h 2006-01-16 14:19:12.000000000 +0000
+++ linux-2.6.15-git12/drivers/char/rio/eisa.h 1970-01-01 01:00:00.000000000 +0100
@@ -1,104 +0,0 @@
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
-
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : eisa.h
-** SID : 1.2
-** Last Modified : 11/6/98 11:34:10
-** Retrieved : 11/6/98 11:34:21
-**
-** ident @(#)eisa.h 1.2
-**
-** -----------------------------------------------------------------------------
-*/
-
-#ifndef __rio_eisa_h__
-#define __rio_eisa_h__
-
-#ifdef SCCS_LABELS
-#ifndef lint
-static char *_eisa_h_sccs_ = "@(#)eisa.h 1.2";
-#endif
-#endif
-
-/*
-** things to do with the EISA bus
-*/
-
-#define RIO_EISA_STRING_ADDRESS 0xfffd9 /* where EISA is stored */
-
-#define RIO_MAX_EISA_SLOTS 16 /* how many EISA slots? */
-
-#define RIO_EISA_IDENT 0x984D /* Specialix */
-#define RIO_EISA_PRODUCT_CODE 0x14 /* Code 14 */
-#define RIO_EISA_ENABLE_BIT 0x01 /* To enable card */
-
-#define EISA_MEMORY_BASE_LO 0xC00 /* A16-A23 */
-#define EISA_MEMORY_BASE_HI 0xC01 /* A24-A31 */
-#define EISA_INTERRUPT_VEC 0xC02 /* see below */
-#define EISA_CONTROL_PORT 0xC02 /* see below */
-#define EISA_INTERRUPT_RESET 0xC03 /* read to clear IRQ */
-
-#define EISA_PRODUCT_IDENT_LO 0xC80 /* where RIO_EISA_IDENT is */
-#define EISA_PRODUCT_IDENT_HI 0xC81
-#define EISA_PRODUCT_NUMBER 0xC82 /* where PROD_CODE is */
-#define EISA_REVISION_NUMBER 0xC83 /* revision (1dp) */
-#define EISA_ENABLE 0xC84 /* set LSB to enable card */
-#define EISA_UNIQUE_NUM_0 0xC88 /* vomit */
-#define EISA_UNIQUE_NUM_1 0xC8A
-#define EISA_UNIQUE_NUM_2 0xC90 /* bit strangely arranged */
-#define EISA_UNIQUE_NUM_3 0xC92
-#define EISA_MANUF_YEAR 0xC98 /* when */
-#define EISA_MANUF_WEEK 0xC9A /* more when */
-
-#define EISA_TP_BOOT_FROM_RAM 0x01
-#define EISA_TP_BOOT_FROM_LINK 0x00
-#define EISA_TP_FAST_LINKS 0x02
-#define EISA_TP_SLOW_LINKS 0x00
-#define EISA_TP_BUS_ENABLE 0x04
-#define EISA_TP_BUS_DISABLE 0x00
-#define EISA_TP_RUN 0x08
-#define EISA_TP_RESET 0x00
-#define EISA_POLLED 0x00
-#define EISA_IRQ_3 0x30
-#define EISA_IRQ_4 0x40
-#define EISA_IRQ_5 0x50
-#define EISA_IRQ_6 0x60
-#define EISA_IRQ_7 0x70
-#define EISA_IRQ_9 0x90
-#define EISA_IRQ_10 0xA0
-#define EISA_IRQ_11 0xB0
-#define EISA_IRQ_12 0xC0
-#define EISA_IRQ_14 0xE0
-#define EISA_IRQ_15 0xF0
-
-#define EISA_INTERRUPT_MASK 0xF0
-#define EISA_CONTROL_MASK 0x0F
-
-#define RIO_EISA_DEFAULT_MODE EISA_TP_SLOW_LINKS
-
-#define RIOEisaToIvec(X) (uchar )((uchar)((X) & EISA_INTERRUPT_MASK)>>4)
-
-#define INBZ(z,x) inb(((z)<<12) | (x))
-#define OUTBZ(z,x,y) outb((((z)<<12) | (x)), y)
-
-#endif /* __rio_eisa_h__ */
reply other threads:[~2006-01-16 16:45 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1137430156.15553.12.camel@localhost.localdomain \
--to=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®