From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932178AbWBLB74 (ORCPT ); Sat, 11 Feb 2006 20:59:56 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932180AbWBLB74 (ORCPT ); Sat, 11 Feb 2006 20:59:56 -0500 Received: from outpipe-village-512-1.bc.nu ([81.2.110.250]:10974 "EHLO lxorguk.ukuu.org.uk") by vger.kernel.org with ESMTP id S932178AbWBLB74 (ORCPT ); Sat, 11 Feb 2006 20:59:56 -0500 Subject: Re: NCR 53c700-66 MCA(EISA) doesn't want to work(2.4.x) From: Alan Cox To: Zdenek Styblik Cc: linux-kernel@vger.kernel.org In-Reply-To: <43EE5D68.5080501@turnovfree.net> References: <43EE5D68.5080501@turnovfree.net> Content-Type: text/plain Content-Transfer-Encoding: 7bit Date: Sun, 12 Feb 2006 02:02:15 +0000 Message-Id: <1139709735.23823.2.camel@localhost.localdomain> Mime-Version: 1.0 X-Mailer: Evolution 2.2.3 (2.2.3-2.fc4) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Sad, 2006-02-11 at 22:55 +0100, Zdenek Styblik wrote: > I have Intel Professional Workstation with LP468 motherboard which has > everything else except PCI. There is integrated SCSI controller NCR > 53c700-66 50pin which is probably on MCA(or EISA bus). Problem is that > I can't make it work. I tried NCR 53c7xx, 8xx support(naturally), but I had an old panther board years and years ago although it blew up in the end and which is similar. I always used the IDE on it. There is an NCR53C700 core driver in the SCSI layer and MCA drivers for a couple of boards but at minimum I suspect you are looking at writing a new board interface assuming you can get enough information to do so.