From: Paul Blazejowski <paulb@blazebox.homeip.net>
To: LKML <linux-kernel@vger.kernel.org>
Subject: Re: Linux v2.6.16-rc6
Date: Sat, 11 Mar 2006 22:25:33 -0500 [thread overview]
Message-ID: <1142133933.19645.0.camel@blaze.homeip.net> (raw)
[-- Attachment #1: Type: text/plain, Size: 3057 bytes --]
Are these UDMA transfer rates normal?
libata version 1.20 loaded.
sata_nv 0000:00:07.0: version 0.8
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00: 07.0[A] -> Link [APSI] -> GSI 22 (level, low)
-> IRQ 20
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 20
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 20
ata1: SATA link down (SStatus 0)
scsi1 : sata_nv
ata2: SATA link down (SStatus 0)
scsi2 : sata_nv
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 21 (level, low) -=
>
IRQ 21
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 21
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 21
eth0: link up.
ata3: SATA link up 1.5 Gbps (SStatus 113)
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0091065c55]
ata3: dev 0 cfg 49:2f00 82:306b 83:7e01 84:4003 85:3068 86:3c01 87:4003
88:203f
ata3: dev 0 ATA-6, max UDMA/100, 390721968 sectors: LBA48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata3: dev 0 configured for UDMA/100
scsi3 : sata_nv
ieee1394: Host added: ID:BUS[1-00:1023] GUID[0011d800004f6359]
ata4: SATA link up 1.5 Gbps (SStatus 113)
ata4: dev 0 cfg 49:2f00 82:346b 83:7f61 84:4003 85:3468 86:3c41 87:4003
88:407f
ata4: dev 0 ATA-6, max UDMA/133, 390721968 sectors: LBA48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata4: dev 0 configured for UDMA/133
scsi4 : sata_nv
Vendor: ATA Model: WDC WD2000JD-60K Rev: 08.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb:<4>nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
sdb1 sdb2 sdb3 sdb4
sd 3:0:0:0: Attached scsi disk sdb
Vendor: ATA Model: WDC WD2000JD-00H Rev: 08.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdc: 390721968 512-byte hdwr sectors (200050 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
SCSI device sdc: 390721968 512-byte hdwr sectors (200050 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
sdc:<4>nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
sdc1 sdc2 sdc3 sdc4
sd 4:0:0:0: Attached scsi disk sdc
Cheers!
Paul B.
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 191 bytes --]
next reply other threads:[~2006-03-12 3:25 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-12 3:25 Paul Blazejowski [this message]
2006-03-12 5:07 ` Andrew Morton
2006-03-13 20:14 ` Jan Engelhardt
2006-03-13 22:32 ` Randy.Dunlap
-- strict thread matches above, loose matches on Subject: below --
2006-03-12 18:45 Paul Blazejowski
2006-03-12 21:46 ` Lee Revell
2006-03-12 22:21 ` Paul Blazejowski
2006-03-12 22:57 ` Jeff Garzik
2006-03-13 20:17 ` Jan Engelhardt
2006-03-12 22:54 ` Jeff Garzik
2006-03-12 23:19 ` Paul Blazejowski
2006-03-16 21:58 ` Bill Davidsen
2006-03-11 23:58 Linus Torvalds
2006-03-12 1:51 ` Michal Piotrowski
2006-03-12 2:39 ` David S. Miller
2006-03-12 3:28 ` Chris Adams
2006-03-12 3:35 ` Lee Revell
2006-03-12 10:57 ` Michal Feix
2006-03-12 8:35 ` Willy Tarreau
2006-03-12 12:04 ` Michal Piotrowski
2006-04-09 12:08 ` Andy Furniss
2006-03-12 9:03 ` Christoph Hellwig
2006-03-13 19:54 ` Bjorn Helgaas
2006-03-13 21:57 ` Christoph Hellwig
2006-03-16 22:12 ` Bill Davidsen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1142133933.19645.0.camel@blaze.homeip.net \
--to=paulb@blazebox.homeip.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®