From: Arjan van de Ven <arjan@infradead.org>
To: linux-kernel@vger.kernel.org, ak@suse.de
Subject: [patch 4 of 4] i386 version of the changes
Date: Sat, 25 Mar 2006 17:25:45 +0100 [thread overview]
Message-ID: <1143303946.2898.11.camel@laptopd505.fenrus.org> (raw)
In-Reply-To: <1143303796.2898.6.camel@laptopd505.fenrus.org>
---
arch/i386/kernel/setup.c | 30 ++++++++++++++++++++++++++++++
arch/i386/pci/mmconfig.c | 12 ++++++++++++
include/asm-i386/e820.h | 3 +++
3 files changed, 45 insertions(+)
Index: linux-2.6.16-mmconfig/arch/i386/kernel/setup.c
===================================================================
--- linux-2.6.16-mmconfig.orig/arch/i386/kernel/setup.c
+++ linux-2.6.16-mmconfig/arch/i386/kernel/setup.c
@@ -991,6 +991,36 @@ void __init find_max_pfn(void)
}
/*
+ * This function checks if the entire range <start,end> is mapped with type.
+ *
+ * Note: this function only works correct if the e820 table is sorted and
+ * not-overlapping, which is the case
+ */
+int __init e820_all_mapped(unsigned long start, unsigned long end, unsigned type)
+{
+ int i;
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *ei = &e820.map[i];
+ if (type && ei->type != type)
+ continue;
+ /* is the region (part) in overlap with the current region ?*/
+ if (ei->addr >= end || ei->addr + ei->size <= start)
+ continue;
+
+ /* if the region is at the beginning of <start,end> we move
+ * start to the end of the region since it's ok until there
+ */
+ if (ei->addr <= start)
+ start = ei->addr + ei->size;
+ /* if start is now at or beyond end, we're done, full coverage */
+ if (start >= end)
+ return 1; /* we're done */
+ }
+ return 0;
+}
+
+
+/*
* Determine low and high memory ranges:
*/
unsigned long __init find_max_low_pfn(void)
Index: linux-2.6.16-mmconfig/arch/i386/pci/mmconfig.c
===================================================================
--- linux-2.6.16-mmconfig.orig/arch/i386/pci/mmconfig.c
+++ linux-2.6.16-mmconfig/arch/i386/pci/mmconfig.c
@@ -12,6 +12,7 @@
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/acpi.h>
+#include <asm/e820.h>
#include "pci.h"
#define mmcfg_virt_addr ((void __iomem *) fix_to_virt(FIX_PCIE_MCFG))
@@ -19,6 +20,9 @@
/* The base address of the last MMCONFIG device accessed */
static u32 mmcfg_last_accessed_device;
+#define MMCONFIG_APER_SIZE (256*1024*1024)
+
+
static DECLARE_BITMAP(fallback_slots, 32);
/*
@@ -183,6 +187,14 @@ void __init pci_mmcfg_init(void)
(pci_mmcfg_config[0].base_address == 0))
return;
+ if (!e820_all_mapped(pci_mmcfg_config[0].base_address,
+ pci_mmcfg_config[0].base_address + MMCONFIG_APER_SIZE,
+ E820_RESERVED)) {
+ printk(KERN_INFO "PCI: BIOS Bug: MCFG area is not E820-reserved\n");
+ printk(KERN_INFO "PCI: Not using MMCONFIG.\n");
+ return;
+ }
+
printk(KERN_INFO "PCI: Using MMCONFIG\n");
raw_pci_ops = &pci_mmcfg;
pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
Index: linux-2.6.16-mmconfig/include/asm-i386/e820.h
===================================================================
--- linux-2.6.16-mmconfig.orig/include/asm-i386/e820.h
+++ linux-2.6.16-mmconfig/include/asm-i386/e820.h
@@ -35,6 +35,9 @@ struct e820map {
};
extern struct e820map e820;
+
+extern int e820_all_mapped(unsigned long start, unsigned long end, unsigned type);
+
#endif/*!__ASSEMBLY__*/
#endif/*__E820_HEADER*/
next prev parent reply other threads:[~2006-03-25 16:26 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-25 16:23 [patch 1 of 4] Rename e820_map to e820_any_map to reflect its behavior better Arjan van de Ven
2006-03-25 16:24 ` [patch 2 of 4] Introduce e820_all_mapped Arjan van de Ven
2006-03-25 16:24 ` [patch 3 of 4] MCFG sanity check Arjan van de Ven
2006-03-25 16:25 ` Arjan van de Ven [this message]
2006-03-25 16:50 ` [patch 1 of 4] Rename e820_map to e820_any_map to reflect its behavior better Andi Kleen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1143303946.2898.11.camel@laptopd505.fenrus.org \
--to=arjan@infradead.org \
--cc=ak@suse.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®