From: James Bottomley <James.Bottomley@SteelEye.com>
To: Linus Torvalds <torvalds@osdl.org>, Andrew Morton <akpm@osdl.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>,
linux-scsi <linux-scsi@vger.kernel.org>
Subject: [GIT PATCH] SCSI bug fixes for 2.6.17-rc1
Date: Fri, 14 Apr 2006 16:34:24 -0500 [thread overview]
Message-ID: <1145050464.3520.62.camel@mulgrave.il.steeleye.com> (raw)
This is mainly bug fixes, but there are one or two driver updates (as
appropriate for a -rc1) and the final removal of qlogicfc after davem
agreed.
The patch is available here
master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git
The short changelog is
adam radford:
o 3ware 9000 disable local irqs during kmap_atomic
Brian King:
o ipr: Bump version
o ipr: printk macro cleanup/removal
o ipr: Reset device cleanup
o ipr: Simplify status area dumping
o ipr: Fixup device type check
o ipr: Disk remove path cleanup
Christoph Hellwig:
o unify SCSI_IOCTL_SEND_COMMAND implementations
Dave C Boutcher:
o ibmvscsi: prevent scsi commands being sent in invalid state
Douglas Gilbert:
o sg: fix leak when dio setup fails
Eric Moore:
o mptfusion - fix panic in mptsas_slave_configure
Hannes Reinecke:
o aic79xx: target hotplug fixes
o aic79xx bus reset update
James Bottomley:
o scsi_transport_sas: don't scan a non-existent end device
o add SCSI_UNKNOWN and LUN transfer limit restrictions
o expose sas internal class for the domain transport
o remove qlogicfc
James Smart:
o FC transport: fixes for workq deadlocks
Kamezawa Hiroyuki:
o for_each_possible_cpu: scsi
Mark Haverkamp:
o aacraid: Show max channel and max id is sysfs
o aacraid: Driver version update
o aacraid: Fix parenthesis placement error
o aacraid: Re-start helper thread if it dies
o aacraid: Fix error in max_channel field
o aacraid: Fix extra unregister_chrdev
o aacraid: General driver cleanup
o aacraid: Error path cleanup
o aacraid: Add timeout for events
o aacraid: Use scmd_ functions
o aacraid: Track command ownership in driver
Matthew Wilcox:
o sym2: Fix build when spinlock debugging is enabled
o Version 2.2.3
o Enable clustering and large transfers
o Allow nvram settings to determine bus mode
o Simplify error handling
o Use SPI messages where possible
o Disable sym2 driver queueing
o Use pcibios_resource_to_bus()
o Simplify error handling a bit
o Mark div_10M array const
o Change Kconfig option from IOMAPPED to MMIO
Mike Anderson:
o sas transport: ref count update
Mike Christie:
o fix sg leak when scsi_execute_async fails
Tejun Heo:
o fix scsi_kill_request() busy count handling
Tomonori FUJITA:
o ibmvscsi: remove drivers/scsi/ibmvscsi/srp.h
o ibmvscsi: convert the ibmvscsi driver to use include/scsi/srp.h
And the diffstat:
/home/jejb/scsi-rc-fixes-2.6.: No such file or directory
jejb@titanic> diffstat ~/scsi-rc-fixes-2.6.diff
b/block/scsi_ioctl.c | 101
b/drivers/message/fusion/mptsas.c | 10
b/drivers/scsi/3w-9xxx.c | 9
b/drivers/scsi/Kconfig | 24
b/drivers/scsi/Makefile | 1
b/drivers/scsi/aacraid/aachba.c | 94
b/drivers/scsi/aacraid/aacraid.h | 11
b/drivers/scsi/aacraid/commctrl.c | 12
b/drivers/scsi/aacraid/commsup.c | 41
b/drivers/scsi/aacraid/linit.c | 64
b/drivers/scsi/aacraid/rkt.c | 4
b/drivers/scsi/aacraid/rx.c | 4
b/drivers/scsi/aacraid/sa.c | 2
b/drivers/scsi/aic7xxx/aic79xx.h | 4
b/drivers/scsi/aic7xxx/aic79xx_core.c | 168
b/drivers/scsi/aic7xxx/aic79xx_osm.c | 4
b/drivers/scsi/ibmvscsi/ibmvscsi.c | 251
b/drivers/scsi/ibmvscsi/ibmvscsi.h | 2
b/drivers/scsi/ibmvscsi/rpa_vscsi.c | 1
b/drivers/scsi/ibmvscsi/viosrp.h | 17
b/drivers/scsi/ipr.c | 122
b/drivers/scsi/ipr.h | 46
b/drivers/scsi/scsi.c | 5
b/drivers/scsi/scsi_devinfo.c | 4
b/drivers/scsi/scsi_ioctl.c | 176
b/drivers/scsi/scsi_lib.c | 15
b/drivers/scsi/scsi_sas_internal.h | 38
b/drivers/scsi/scsi_scan.c | 19
b/drivers/scsi/scsi_transport_fc.c | 464 +
b/drivers/scsi/scsi_transport_sas.c | 67
b/drivers/scsi/sg.c | 7
b/drivers/scsi/sym53c8xx_2/sym_defs.h | 2
b/drivers/scsi/sym53c8xx_2/sym_glue.c | 205
b/drivers/scsi/sym53c8xx_2/sym_glue.h | 2
b/drivers/scsi/sym53c8xx_2/sym_hipd.c | 113
b/drivers/scsi/sym53c8xx_2/sym_hipd.h | 2
b/include/linux/blkdev.h | 4
b/include/scsi/scsi_devinfo.h | 1
b/include/scsi/scsi_ioctl.h | 2
b/include/scsi/scsi_transport_fc.h | 41
drivers/scsi/ibmvscsi/srp.h | 227
drivers/scsi/qlogicfc.c | 2228 -------
drivers/scsi/qlogicfc_asm.c | 9751 ----------------------------------
43 files changed, 1097 insertions(+), 13268 deletions(-)
James
reply other threads:[~2006-04-14 21:34 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1145050464.3520.62.camel@mulgrave.il.steeleye.com \
--to=james.bottomley@steeleye.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®