mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Egry Gábor" <gaboregry@t-online.hu>
To: dwmw2@infradead.org
Cc: trivial-list <trivial@kernel.org>,
	linux-kernel <linux-kernel@vger.kernel.org>
Subject: [PATCH] mtd: Trivial typo fixes
Date: Fri, 12 May 2006 15:04:48 +0200	[thread overview]
Message-ID: <1147439088.27820.27.camel@spirit> (raw)


Trivial typo fixes in Kconfig files (MTD).

Signed-off-by: Egry Gabor <gaboregry@t-online.hu>

---

 linux-2.6.17-rc4-i18n-kconfig-gabaman/drivers/mtd/Kconfig                  |    4 ++--
 linux-2.6.17-rc4-i18n-kconfig-gabaman/drivers/mtd/maps/Kconfig             |    2 +-
 linux-2.6.17-rc4-i18n-kconfig-gabaman/drivers/mtd/nand/Kconfig             |    2 +-

diff -puN drivers/mtd/Kconfig~kconfig-i18n-22-typo-fixes drivers/mtd/Kconfig
--- linux-2.6.17-rc4-i18n-kconfig/drivers/mtd/Kconfig~kconfig-i18n-22-typo-fixes	2006-05-12 12:43:50.000000000 +0200
+++ linux-2.6.17-rc4-i18n-kconfig-gabaman/drivers/mtd/Kconfig	2006-05-12 12:43:50.000000000 +0200
@@ -78,7 +78,7 @@ config MTD_REDBOOT_DIRECTORY_BLOCK
 	  option.
 
 	  The option specifies which Flash sectors holds the RedBoot
-	  partition table.  A zero or positive value gives an absolete
+	  partition table.  A zero or positive value gives an absolute
 	  erase block number. A negative value specifies a number of
 	  sectors before the end of the device.
 
@@ -103,7 +103,7 @@ config MTD_CMDLINE_PARTS
 	bool "Command line partition table parsing"
 	depends on MTD_PARTITIONS = "y"
 	---help---
-	  Allow generic configuration of the MTD paritition tables via the kernel
+	  Allow generic configuration of the MTD partition tables via the kernel
 	  command line. Multiple flash resources are supported for hardware where
 	  different kinds of flash memory are available.
 
diff -puN drivers/mtd/maps/Kconfig~kconfig-i18n-22-typo-fixes drivers/mtd/maps/Kconfig
--- linux-2.6.17-rc4-i18n-kconfig/drivers/mtd/maps/Kconfig~kconfig-i18n-22-typo-fixes	2006-05-12 12:43:50.000000000 +0200
+++ linux-2.6.17-rc4-i18n-kconfig-gabaman/drivers/mtd/maps/Kconfig	2006-05-12 12:43:50.000000000 +0200
@@ -109,7 +109,7 @@ config MTD_TS5500
 	  mtd1 allows you to reprogram your BIOS. BE VERY CAREFUL.
 
 	  Note that jumper 3 ("Write Enable Drive A") must be set
-	  otherwise detection won't succeeed.
+	  otherwise detection won't succeed.
 
 config MTD_SBC_GXX
 	tristate "CFI Flash device mapped on Arcom SBC-GXx boards"
diff -puN drivers/mtd/nand/Kconfig~kconfig-i18n-22-typo-fixes drivers/mtd/nand/Kconfig
--- linux-2.6.17-rc4-i18n-kconfig/drivers/mtd/nand/Kconfig~kconfig-i18n-22-typo-fixes	2006-05-12 12:43:50.000000000 +0200
+++ linux-2.6.17-rc4-i18n-kconfig-gabaman/drivers/mtd/nand/Kconfig	2006-05-12 12:45:56.000000000 +0200
@@ -87,7 +87,7 @@ config MTD_NAND_S3C2410
 	  This enables the NAND flash controller on the S3C2410 and S3C2440
 	  SoCs
 
-	  No board specfic support is done by this driver, each board
+	  No board specific support is done by this driver, each board
 	  must advertise a platform_device for the driver to attach.
 
 config MTD_NAND_S3C2410_DEBUG

_


             reply	other threads:[~2006-05-12 13:04 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-05-12 13:04 Egry Gábor [this message]
2006-05-12 16:35 ` David Woodhouse

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1147439088.27820.27.camel@spirit \
    --to=gaboregry@t-online.hu \
    --cc=dwmw2@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=trivial@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®