From: Michal Nazarewicz <m.nazarewicz@samsung.com>
To: linux-usb@vger.kernel.org
Cc: Kyungmin Park <kyungmin.park@samsung.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Viral Mehta <Viral.Mehta@lntinfotech.com>,
linux-kernel@vger.kernel.org,
Michal Nazarewicz <mina86@mina86.com>
Subject: [PATCH] USB: gadget: f_mass_storage: fix in error recovery
Date: Wed, 12 May 2010 12:51:13 +0200 [thread overview]
Message-ID: <1148fb1fcb3a9864a2a12fbbf2e3444827c9ed4a.1273661077.git.mina86@mina86.com> (raw)
In-Reply-To: <70376CA23424B34D86F1C7DE6B9973430254343ABF@VSHINMSMBX01.vshodc.lntinfotech.com>
In to places in fsg_common_init() an unconditional call to kfree()
on common was performed in error recovery which is not a valid
behaviour since fsg_common structure is not always allocated by
fsg_common_init().
To fix, the calls has been replaced with a goto to a proper error
recovery which does the correct thing.
Also, refactored fsg_common_release() function.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
---
On Wed, 12 May 2010 12:33:43 +0200, Viral Mehta <Viral.Mehta@lntinfotech.com> wrote:
> In that case, in addition to your previous patch, below hunk is needed
>
> diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
> index f4911c0..b1648fc 100644
> --- a/drivers/usb/gadget/f_mass_storage.c
> +++ b/drivers/usb/gadget/f_mass_storage.c
> @@ -2883,15 +2883,16 @@ static void fsg_common_release(struct kref *ref)
>
> /* Beware tempting for -> do-while optimization: when in error
> * recovery nluns may be zero. */
> + if(common->luns) {
> + for (; i; --i, ++lun) {
> + device_remove_file(&lun->dev, &dev_attr_ro);
> + device_remove_file(&lun->dev, &dev_attr_file);
> + fsg_lun_close(lun);
> + device_unregister(&lun->dev);
> + }
>
> - for (; i; --i, ++lun) {
> - device_remove_file(&lun->dev, &dev_attr_ro);
> - device_remove_file(&lun->dev, &dev_attr_file);
> - fsg_lun_close(lun);
> - device_unregister(&lun->dev);
> + kfree(common->luns);
> }
> -
> - kfree(common->luns);
> if (common->free_storage_on_release)
> kfree(common);
> }
This is not entairly true but if you insist, attached is a bit
different version of your proposed chang.
drivers/usb/gadget/f_mass_storage.c | 51 +++++++++++++++++------------------
1 files changed, 25 insertions(+), 26 deletions(-)
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 6cfd2f4..7d05a0b 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -2742,10 +2742,8 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
/* Maybe allocate device-global string IDs, and patch descriptors */
if (fsg_strings[FSG_STRING_INTERFACE].id == 0) {
rc = usb_string_id(cdev);
- if (rc < 0) {
- kfree(common);
- return ERR_PTR(rc);
- }
+ if (unlikely(rc < 0))
+ goto error_release;
fsg_strings[FSG_STRING_INTERFACE].id = rc;
fsg_intf_desc.iInterface = rc;
}
@@ -2753,9 +2751,9 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
/* Create the LUNs, open their backing files, and register the
* LUN devices in sysfs. */
curlun = kzalloc(nluns * sizeof *curlun, GFP_KERNEL);
- if (!curlun) {
- kfree(common);
- return ERR_PTR(-ENOMEM);
+ if (unlikely(!curlun)) {
+ rc = -ENOMEM;
+ goto error_release;
}
common->luns = curlun;
@@ -2914,11 +2912,7 @@ error_release:
static void fsg_common_release(struct kref *ref)
{
- struct fsg_common *common =
- container_of(ref, struct fsg_common, ref);
- unsigned i = common->nluns;
- struct fsg_lun *lun = common->luns;
- struct fsg_buffhd *bh;
+ struct fsg_common *common = container_of(ref, struct fsg_common, ref);
/* If the thread isn't already dead, tell it to exit now */
if (common->state != FSG_STATE_TERMINATED) {
@@ -2929,23 +2923,28 @@ static void fsg_common_release(struct kref *ref)
complete(&common->thread_notifier);
}
- /* Beware tempting for -> do-while optimization: when in error
- * recovery nluns may be zero. */
+ if (likely(common->luns)) {
+ struct fsg_lun *lun = common->luns;
+ unsigned i = common->nluns;
- for (; i; --i, ++lun) {
- device_remove_file(&lun->dev, &dev_attr_ro);
- device_remove_file(&lun->dev, &dev_attr_file);
- fsg_lun_close(lun);
- device_unregister(&lun->dev);
- }
+ /* In error recovery common->nluns may be zero. */
+ for (; i; --i, ++lun) {
+ device_remove_file(&lun->dev, &dev_attr_ro);
+ device_remove_file(&lun->dev, &dev_attr_file);
+ fsg_lun_close(lun);
+ device_unregister(&lun->dev);
+ }
- kfree(common->luns);
+ kfree(common->luns);
+ }
- i = FSG_NUM_BUFFERS;
- bh = common->buffhds;
- do {
- kfree(bh->buf);
- } while (++bh, --i);
+ {
+ struct fsg_buffhd *bh = common->buffhds;
+ unsigned i = FSG_NUM_BUFFERS;
+ do {
+ kfree(bh->buf);
+ } while (++bh, --i);
+ }
if (common->free_storage_on_release)
kfree(common);
--
1.7.1
next prev parent reply other threads:[~2010-05-12 10:50 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-12 8:16 [PATCH] USB: gadget: f_mass_storage: fix in fsg_common_init() " Michal Nazarewicz
2010-05-12 8:29 ` Viral Mehta
2010-05-12 9:02 ` Michał Nazarewicz
2010-05-12 9:28 ` Viral Mehta
2010-05-12 9:36 ` Viral Mehta
2010-05-12 9:57 ` Michał Nazarewicz
2010-05-12 10:33 ` Viral Mehta
2010-05-12 10:51 ` Michal Nazarewicz [this message]
2010-05-12 12:03 ` [PATCH] USB: gadget: f_mass_storage: fix in " Viral Mehta
2010-05-12 21:39 ` Greg KH
2010-05-12 22:16 ` Michal Nazarewicz
2010-05-12 9:53 ` [PATCH] USB: gadget: f_mass_storage: fix in fsg_common_init() " Michał Nazarewicz
2010-05-12 10:06 ` Viral Mehta
2010-05-12 10:34 ` Michał Nazarewicz
2010-05-12 10:37 ` Viral Mehta
2010-05-12 10:52 ` Michał Nazarewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1148fb1fcb3a9864a2a12fbbf2e3444827c9ed4a.1273661077.git.mina86@mina86.com \
--to=m.nazarewicz@samsung.com \
--cc=Viral.Mehta@lntinfotech.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mina86@mina86.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®