On Tue, 2006-09-05 at 11:13 -0400, Jeff Garzik wrote: > Sergio Monteiro Basto wrote: > > On Mon, 2006-09-04 at 11:33 -0700, Chris Wedgwood wrote: > >> On Mon, Sep 04, 2006 at 12:54:07PM +0100, Sergio Monteiro Basto wrote: > >> > >>> I don't know if this is a real question. Have we VIA products on PCI > >>> card, running on not VIA chip sets ? > >> Yes. Certainly for on-board devices too. > > > > OK , other argument. > > We have billions of VIA chip sets with VIA PCI on-board and > > VIA PCI on others chip sets, if exists, are a very few. > > So, because some exceptions, we shouldn't stop a resolution of a very > > large % of the cases. > > No thanks. As VIA SATA maintainer, I like being able to use my VIA SATA > PCI card. > > Jeff I have 2 computer with 2 different Asrock (http://www.asrock.com/product/775Dual-880Pro.htm) boards, both have a VIA8237 and a VIA SATA, and both are quirked wrongly, when I use kernels 2.6.17+ . And if I haven't bought this 2 computers in a supermarket, I won't be here discussion this subjects. So I like to remember http://lkml.org/lkml/2006/7/28/264 http://lkml.org/lkml/2006/9/4/111 ( that confirm a VIA SATA on XT-PIC mode ) http://lkml.org/lkml/2006/9/1/106 ) So VIA SATA needs my patch or Daniel Drake patch to _WORK_ . Adding my patch to Daniel Drake patch ( that is already on -mm series ) could be a reasonable solution. Patch for 2.6.18-rc5-mm1 Cc: Daniel Drake Cc: Alan Cox Cc: "Scott J. Harmon" Cc: Andrew Morton Cc: Chris Wedgwood Cc: Greg KH Signed-off-by: Sergio Monteiro Basto irq & 0xf; pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); if (new_irq != irq) { - printk(KERN_INFO "PCI: VIA IRQ fixup for %s, from %d to %d\n", + printk(KERN_INFO "PCI: VIA PIC IRQ fixup for %s, from %d to %d\n", pci_name(dev), irq, new_irq); udelay(15); /* unknown if delay really needed */ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq); Thanks, -- Sérgio M. B.