From: Steven Whitehouse <swhiteho@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Wendy Cheng <wcheng@redhat.com>, cluster-devel@redhat.com
Subject: [GFS2] Fix DIO deadlock [9/54]
Date: Mon, 05 Feb 2007 14:16:41 +0000 [thread overview]
Message-ID: <1170685001.11001.288.camel@quoit.chygwyn.com> (raw)
In-Reply-To: <1170684425.11001.267.camel@quoit.chygwyn.com>
>From a22b0aa4d1fe6c359001e3a807d4916684bf862d Mon Sep 17 00:00:00 2001
From: Steven Whitehouse <swhiteho@redhat.com>
Date: Thu, 14 Dec 2006 18:24:26 +0000
Subject: [PATCH] [GFS2] Fix DIO deadlock
This patch fixes Red Hat bugzilla #212627 in which a deadlock occurs
due to trying to take the i_mutex while holding a glock. The correct
locking order is defined as i_mutex -> glock in all cases.
I've left dealing with allocating writes. I know that we need to do
that, but for now this should do the trick. We don't need to take the
i_mutex on write, because the VFS has already taken it for us. On read
we don't need it since the glock is enough protection. The reason that
I've made some of the checks into a separate function is that we'll need
to do the checks again in the allocating write case eventually, so this
is partly in preparation for this. Likewise the return value test of !=
1 might look a bit odd and thats because we'll need a third return value
in case of requiring an allocation.
I've made the change to deferred mode on the glock to ensure flushing
read caches on other nodes. I notice that (using blktrace to look at
whats going on) we appear to do a better job of large I/Os than ext3
after this patch (in terms of not splitting up the I/Os).
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Wendy Cheng <wcheng@redhat.com>
diff --git a/fs/gfs2/ops_address.c b/fs/gfs2/ops_address.c
index d8d69a7..0118aa4 100644
--- a/fs/gfs2/ops_address.c
+++ b/fs/gfs2/ops_address.c
@@ -594,6 +594,36 @@ static void gfs2_invalidatepage(struct page *page, unsigned long offset)
return;
}
+/**
+ * gfs2_ok_for_dio - check that dio is valid on this file
+ * @ip: The inode
+ * @rw: READ or WRITE
+ * @offset: The offset at which we are reading or writing
+ *
+ * Returns: 0 (to ignore the i/o request and thus fall back to buffered i/o)
+ * 1 (to accept the i/o request)
+ */
+static int gfs2_ok_for_dio(struct gfs2_inode *ip, int rw, loff_t offset)
+{
+ /*
+ * Should we return an error here? I can't see that O_DIRECT for
+ * a journaled file makes any sense. For now we'll silently fall
+ * back to buffered I/O, likewise we do the same for stuffed
+ * files since they are (a) small and (b) unaligned.
+ */
+ if (gfs2_is_jdata(ip))
+ return 0;
+
+ if (gfs2_is_stuffed(ip))
+ return 0;
+
+ if (offset > i_size_read(&ip->i_inode))
+ return 0;
+ return 1;
+}
+
+
+
static ssize_t gfs2_direct_IO(int rw, struct kiocb *iocb,
const struct iovec *iov, loff_t offset,
unsigned long nr_segs)
@@ -604,42 +634,28 @@ static ssize_t gfs2_direct_IO(int rw, struct kiocb *iocb,
struct gfs2_holder gh;
int rv;
- if (rw == READ)
- mutex_lock(&inode->i_mutex);
/*
- * Shared lock, even if its a write, since we do no allocation
- * on this path. All we need change is atime.
+ * Deferred lock, even if its a write, since we do no allocation
+ * on this path. All we need change is atime, and this lock mode
+ * ensures that other nodes have flushed their buffered read caches
+ * (i.e. their page cache entries for this inode). We do not,
+ * unfortunately have the option of only flushing a range like
+ * the VFS does.
*/
- gfs2_holder_init(ip->i_gl, LM_ST_SHARED, GL_ATIME, &gh);
+ gfs2_holder_init(ip->i_gl, LM_ST_DEFERRED, GL_ATIME, &gh);
rv = gfs2_glock_nq_atime(&gh);
if (rv)
- goto out;
-
- if (offset > i_size_read(inode))
- goto out;
-
- /*
- * Should we return an error here? I can't see that O_DIRECT for
- * a journaled file makes any sense. For now we'll silently fall
- * back to buffered I/O, likewise we do the same for stuffed
- * files since they are (a) small and (b) unaligned.
- */
- if (gfs2_is_jdata(ip))
- goto out;
-
- if (gfs2_is_stuffed(ip))
- goto out;
-
- rv = blockdev_direct_IO_own_locking(rw, iocb, inode,
- inode->i_sb->s_bdev,
- iov, offset, nr_segs,
- gfs2_get_block_direct, NULL);
+ return rv;
+ rv = gfs2_ok_for_dio(ip, rw, offset);
+ if (rv != 1)
+ goto out; /* dio not valid, fall back to buffered i/o */
+
+ rv = blockdev_direct_IO_no_locking(rw, iocb, inode, inode->i_sb->s_bdev,
+ iov, offset, nr_segs,
+ gfs2_get_block_direct, NULL);
out:
gfs2_glock_dq_m(1, &gh);
gfs2_holder_uninit(&gh);
- if (rw == READ)
- mutex_unlock(&inode->i_mutex);
-
return rv;
}
--
1.4.4.2
next prev parent reply other threads:[~2007-02-05 14:08 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-05 14:07 [GFS2 & DLM] Proposed patches for 2.6.20 merge window [0/54] Steven Whitehouse
2007-02-05 14:09 ` [GFS2] don't try to lockfs after shutdown [1/54] Steven Whitehouse
2007-02-05 14:09 ` [DLM] fix resend rcom lock [2/54] Steven Whitehouse
2007-02-05 14:10 ` [DLM] fix old rcom messages [3/54] Steven Whitehouse
2007-02-05 14:11 ` [DLM] add version check [4/54] Steven Whitehouse
2007-02-05 14:12 ` [DLM] fix send_args() lvb copying [5/54] Steven Whitehouse
2007-02-05 14:13 ` [DLM] fix receive_request() lvb copying [6/54] Steven Whitehouse
2007-02-05 14:14 ` [DLM] fix lost flags in stub replies Steven Whitehouse
2007-02-05 14:15 ` [DLM] fs/dlm/lowcomms-tcp.c: remove 2 functions [8/54] Steven Whitehouse
2007-02-05 14:16 ` Steven Whitehouse [this message]
2007-02-05 14:17 ` [GFS2] Fail over to readpage for stuffed files [10/54] Steven Whitehouse
2007-02-05 14:18 ` [GFS2] Fix change nlink deadlock [11/54] Steven Whitehouse
2007-02-05 14:19 ` [DLM] Fix schedule() calls [12/54] Steven Whitehouse
2007-02-05 14:19 ` [DLM] Fix spin lock already unlocked bug [13/54] Steven Whitehouse
2007-02-05 14:20 ` [GFS2] Fix ordering of page disposal vs. glock_dq [14/54] Steven Whitehouse
2007-02-05 14:21 ` [GFS2] BZ 217008 fsfuzzer fix [15/54] Steven Whitehouse
2007-02-05 14:22 ` [GFS2] Fix gfs2_rename deadlock [16/54] Steven Whitehouse
2007-02-05 14:22 ` [DLM] change some log_error to log_debug [17/54] Steven Whitehouse
2007-02-05 14:23 ` [DLM] rename dlm_config_info fields [18/54] Steven Whitehouse
2007-02-05 14:24 ` [DLM] add config entry to enable log_debug [16/54] Steven Whitehouse
2007-02-05 14:25 ` [DLM] expose dlm_config_info fields in configfs [20/54] Steven Whitehouse
2007-02-05 14:26 ` [GFS2] gfs2 knows of directories which it chooses not to display [21/54] Steven Whitehouse
2007-02-05 14:27 ` [GFS2] make gfs2_change_nlink_i() static [22/54] Steven Whitehouse
2007-02-05 14:28 ` [DLM] Use workqueues for dlm lowcomms [23/54] Steven Whitehouse
2007-02-05 14:29 ` [DLM] fix user unlocking [24/54] Steven Whitehouse
2007-02-05 14:29 ` [DLM] fix master recovery [25/54] Steven Whitehouse
2007-02-05 14:30 ` [GFS2] Add writepages for "data=writeback" mounts [26/54] Steven Whitehouse
2007-02-05 14:31 ` [GFS2] Clean up/speed up readdir [27/54] Steven Whitehouse
2007-02-05 14:31 ` [GFS2] Remove max_atomic_write tunable [28/54] Steven Whitehouse
2007-02-05 14:32 ` [GFS2] Shrink gfs2_inode memory by half [29/54] Steven Whitehouse
2007-02-05 14:33 ` [GFS2] Remove the "greedy" function from glock.[ch] [30/54] Steven Whitehouse
2007-02-05 14:34 ` [GFS2] Remove unused go_callback operation [31/54] Steven Whitehouse
2007-02-05 14:34 ` [GFS2] Remove local exclusive glock mode [32/54] Steven Whitehouse
2007-02-05 14:35 ` [DLM] lowcomms tidy [33/54] Steven Whitehouse
2007-02-05 14:35 ` [GFS2] Tidy up glops calls [34/54] Steven Whitehouse
2007-02-05 14:36 ` [DLM] fix lowcomms receiving [35/54] Steven Whitehouse
2007-02-05 14:37 ` [GFS2] Remove queue_empty() function [36/54] Steven Whitehouse
2007-02-05 14:37 ` [GFS2] Compile fix for glock.c [37/54] Steven Whitehouse
2007-02-05 14:38 ` [GFS2] use CURRENT_TIME_SEC instead of get_seconds in gfs2 [38/54] Steven Whitehouse
2007-02-05 14:39 ` [GFS2] Fix typo in glock.c [39/54] Steven Whitehouse
2007-02-05 14:40 ` [DLM] Make sock_sem into a mutex [40/54] Steven Whitehouse
2007-02-05 14:40 ` [DLM] saved dlm message can be dropped [41/54] Steven Whitehouse
2007-02-05 14:41 ` [DLM] can miss clearing resend flag Steven Whitehouse
2007-02-05 14:41 ` [GFS2] Fix recursive locking attempt with NFS [43/54] Steven Whitehouse
2007-02-05 14:42 ` [GFS2] Fix list corruption in lops.c [44/54] Steven Whitehouse
2007-02-05 14:43 ` [GFS2] increase default lock limit [45/54] Steven Whitehouse
2007-02-05 14:44 ` [GFS2] make lock_dlm drop_count tunable in sysfs [46/54] Steven Whitehouse
2007-02-05 14:44 ` [GFS2/DLM] use sysfs Steven Whitehouse
2007-02-05 14:45 ` [GFS2/DLM] fix GFS2 circular dependency [48/54] Steven Whitehouse
2007-02-05 14:46 ` [GFS2] more CURRENT_TIME_SEC [49/54] Steven Whitehouse
2007-02-05 14:47 ` [GFS2] Put back semaphore to avoid umount proble Steven Whitehouse
2007-02-05 14:47 ` [GFS2] Fix unlink deadlocks [51/54] Steven Whitehouse
2007-02-05 14:48 ` [DLM/GFS2] indent help text [52/54] Steven Whitehouse
2007-02-05 14:49 ` [DLM] zero new user lvbs [53/54] Steven Whitehouse
2007-02-05 14:50 ` [DLM] fix softlockup in dlm_recv [54/54] Steven Whitehouse
2007-02-07 13:20 ` [GFS2 & DLM] Pull request Steven Whitehouse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1170685001.11001.288.camel@quoit.chygwyn.com \
--to=swhiteho@redhat.com \
--cc=cluster-devel@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=wcheng@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®