mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Prarit Bhargava <prarit@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Sean Christopherson <sean.j.christopherson@intel.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
	x86@kernel.org, "H. Peter Anvin" <hpa@zytor.com>,
	Tony Luck <tony.luck@intel.com>,
	"Peter Zijlstra (Intel)" <peterz@infradead.org>,
	Rahul Tanwar <rahul.tanwar@linux.intel.com>,
	Xiaoyao Li <xiaoyao.li@intel.com>,
	Ricardo Neri <ricardo.neri-calderon@linux.intel.com>,
	Dave Hansen <dave.hansen@linux.intel.com>
Subject: Re: [PATCH v5] x86/split_lock: Sanitize userspace and guest error output
Date: Tue, 30 Jun 2020 07:00:35 -0400	[thread overview]
Message-ID: <11733c3d-056a-e723-c4fe-ec3f55c1e94a@redhat.com> (raw)
In-Reply-To: <20200616113250.2061-1-prarit@redhat.com>

Just re-pinging on this.

P.

On 6/16/20 7:32 AM, Prarit Bhargava wrote:
> There are two problems with kernel messages in fatal mode that were found
> during testing of guests and userspace programs.
> 
> The first is that no kernel message is output when the split lock detector
> is triggered with a userspace program.  As a result the userspace process
> dies from receiving SIGBUS with no indication to the user of what caused
> the process to die.
> 
> The second problem is that only the first triggering guest causes a kernel
> message to be output because the message is output with pr_warn_once().
> This also results in a loss of information to the user.
> 
> While fixing these I noticed that the same message was being output
> three times so I'm cleaning that up too.
> 
> Fix fatal mode output, and use consistent messages for fatal and
> warn modes for both userspace and guests.
> 
> Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
> Signed-off-by: Prarit Bhargava <prarit@redhat.com>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Ingo Molnar <mingo@redhat.com>
> Cc: Borislav Petkov <bp@alien8.de>
> Cc: x86@kernel.org
> Cc: "H. Peter Anvin" <hpa@zytor.com>
> Cc: Tony Luck <tony.luck@intel.com>
> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
> Cc: Sean Christopherson <sean.j.christopherson@intel.com>
> Cc: Rahul Tanwar <rahul.tanwar@linux.intel.com>
> Cc: Xiaoyao Li <xiaoyao.li@intel.com>
> Cc: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
> Cc: Dave Hansen <dave.hansen@linux.intel.com>
> ---
> v2: Do not output a message if CPL 3 Alignment Check is turned on (xiaoyao.li)
> v3: refactor code (sean.j.christopherson)
> v4: Fix Sign off (sean.j.christopherson)
> v5: Fix Sign off (sean.j.christopherson)
> 
>  arch/x86/kernel/cpu/intel.c | 22 ++++++++++------------
>  1 file changed, 10 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
> index 63926c94eb5f..3a373f0be674 100644
> --- a/arch/x86/kernel/cpu/intel.c
> +++ b/arch/x86/kernel/cpu/intel.c
> @@ -1074,11 +1074,14 @@ static void split_lock_init(void)
>  	split_lock_verify_msr(sld_state != sld_off);
>  }
>  
> -static void split_lock_warn(unsigned long ip)
> +static bool handle_split_lock(unsigned long ip)
>  {
> -	pr_warn_ratelimited("#AC: %s/%d took a split_lock trap at address: 0x%lx\n",
> +	pr_warn("#AC: %s/%d took a split_lock trap at address: 0x%lx\n",
>  			    current->comm, current->pid, ip);
>  
> +	if (sld_state != sld_warn)
> +		return false;
> +
>  	/*
>  	 * Disable the split lock detection for this task so it can make
>  	 * progress and set TIF_SLD so the detection is re-enabled via
> @@ -1086,18 +1089,13 @@ static void split_lock_warn(unsigned long ip)
>  	 */
>  	sld_update_msr(false);
>  	set_tsk_thread_flag(current, TIF_SLD);
> +	return true;
>  }
>  
>  bool handle_guest_split_lock(unsigned long ip)
>  {
> -	if (sld_state == sld_warn) {
> -		split_lock_warn(ip);
> +	if (handle_split_lock(ip))
>  		return true;
> -	}
> -
> -	pr_warn_once("#AC: %s/%d %s split_lock trap at address: 0x%lx\n",
> -		     current->comm, current->pid,
> -		     sld_state == sld_fatal ? "fatal" : "bogus", ip);
>  
>  	current->thread.error_code = 0;
>  	current->thread.trap_nr = X86_TRAP_AC;
> @@ -1108,10 +1106,10 @@ EXPORT_SYMBOL_GPL(handle_guest_split_lock);
>  
>  bool handle_user_split_lock(struct pt_regs *regs, long error_code)
>  {
> -	if ((regs->flags & X86_EFLAGS_AC) || sld_state == sld_fatal)
> +	if (regs->flags & X86_EFLAGS_AC)
>  		return false;
> -	split_lock_warn(regs->ip);
> -	return true;
> +
> +	return handle_split_lock(regs->ip);
>  }
>  
>  /*
> 


      reply	other threads:[~2020-06-30 11:00 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-16 11:32 Prarit Bhargava
2020-06-30 11:00 ` Prarit Bhargava [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=11733c3d-056a-e723-c4fe-ec3f55c1e94a@redhat.com \
    --to=prarit@redhat.com \
    --cc=bp@alien8.de \
    --cc=dave.hansen@linux.intel.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=peterz@infradead.org \
    --cc=rahul.tanwar@linux.intel.com \
    --cc=ricardo.neri-calderon@linux.intel.com \
    --cc=sean.j.christopherson@intel.com \
    --cc=tglx@linutronix.de \
    --cc=tony.luck@intel.com \
    --cc=x86@kernel.org \
    --cc=xiaoyao.li@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®