From: James Bottomley <James.Bottomley@SteelEye.com>
To: Andrew Morton <akpm@osdl.org>, Linus Torvalds <torvalds@osdl.org>
Cc: linux-scsi <linux-scsi@vger.kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: [GIT PATCH] final SCSI updates for 2.6.21
Date: Tue, 08 May 2007 20:17:39 -0500 [thread overview]
Message-ID: <1178673459.3737.114.camel@mulgrave.il.steeleye.com> (raw)
This should be the second half of the SCSI tree, mainly assorted driver
updates and fixes. The patch is available from:
master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
The short changelog is:
Adrian Bunk (1):
qla4xxx: possible cleanups
Amol Lad (1):
megaraid: replace yield() with cond_resched()
Andrew Vasquez (6):
qla2xxx: Update version number to 8.01.07-k7.
qla2xxx: Add MSI support.
qla2xxx: Correct pci_set_msi() usage semantics.
qla2xxx: Attempt to stop firmware only if it had been previously executed.
qla2xxx: Honor NVRAM port-down-retry-count settings.
qla2xxx: Error-out during probe() if we're unable to complete HBA initiali
Brian King (11):
ipr: Use PCI-E reset API for new ipr adapter
ipr: Better handle adapter boot time errors
ipr: Enable multi-initator RAID support
ipr: Improved dual adapter errors
ipr: Increase adapter operational timeout
ipr: Handle IOA reset request
ipr: Handle check condition status from disk array device
ipr: Handle UA on disk array following an adapter reset
ipr: Allow driver_data to be passed for dynamic ids
ipr: Prevent overlapped adapter resets
use sysfs configured timeout for EH Start Unit timeout
Christof Schmitt (4):
zfcp: Fix deadlock between zfcp ERP and SCSI
zfcp: Locking for req_no and req_seq_no
zfcp: print S_ID and D_ID with 3 bytes
zfcp: Stop system after memory corruption
Christoph Hellwig (2):
deprecate the old NCR53C9x driver
sas_scsi_host: Convert to use the kthread API
David Milburn (1):
megaraid: update version reported by MEGAIOC_QDRVRVER
Guennadi Liakhovetski (3):
tmscsim: Remove the last bus_to_virt()
tmscsim: remove bogus endianness conversions
tmscsim: remove long dead DMA_INT
Heiko Carstens (3):
zfcp: clear boxed flag on unit reopen.
zfcp: clear adapter failed flag if an fsf request times out.
zfcp: rework request ID management.
James Smart (17):
fc_transport: make all rports wait dev_loss_tmo before removing them
lpfc 8.1.12 : Change version number to 8.1.12
lpfc 8.1.12 : Update copyright year to 2007
lpfc 8.1.12 : Added support for 8G speed and new HBAs
lpfc 8.1.12 : Add support for async scanning
lpfc 8.1.12 : Don't process ERATT interrupts when issuing KILL_BOARD mbx c
lpfc 8.1.12 : Collapse discovery lists to a single node list
lpfc 8.1.12 : Reference count node structures for node lifetime management
lpfc 8.1.12 : Improve handling of failed ELS aborts
lpfc 8.1.12 : Improve diagnostic messages and change local loopback messag
lpfc 8.1.12 : Fixed recovery of rport after race with dev_loss_tmo
lpfc 8.1.12 : Round 2 of Miscellaneous fixes
lpfc 8.1.12 : Reorganize lpfc_nlp_list() and callers to prepare for nodeli
lpfc 8.1.12 : Fix unlock inside list traversal
lpfc 8.1.12 : Rework offline path to solve HBA reset issues
lpfc 8.1.12 : Modify ELS abort handling to prevent double completion
lpfc 8.1.12 : Misc bug fixes and code cleanup
Matthias Kaehlcke (1):
qla1280: use DMA_64BIT_MASK instead of ~ 0ULL
Olaf Hering (1):
mesh: cleanup variable usage in interrupt handler
Salyzyn, Mark (4):
aacraid: correct SUN products to README
aacraid: superfluous adapter reset for IBM 8 series ServeRAID controllers
aacraid: kexec fix (reset interrupt handler)
aacraid: kmalloc/memset->kzalloc
vignesh.babu@wipro.com (2):
dpt_i2o: kmalloc/memset->kzalloc
ch: kmalloc/memset->kzalloc
walter harms (1):
megaraid: fix warnings when CONFIG_PROC_FS=n
And the diffstat:
Documentation/feature-removal-schedule.txt | 9
Documentation/scsi/aacraid.txt | 4
drivers/s390/scsi/zfcp_aux.c | 90 --
drivers/s390/scsi/zfcp_def.h | 41 +
drivers/s390/scsi/zfcp_erp.c | 89 ++
drivers/s390/scsi/zfcp_ext.h | 4
drivers/s390/scsi/zfcp_fsf.c | 50 -
drivers/s390/scsi/zfcp_qdio.c | 49 -
drivers/s390/scsi/zfcp_scsi.c | 9
drivers/scsi/aacraid/comminit.c | 3
drivers/scsi/aacraid/commsup.c | 6
drivers/scsi/aacraid/dpcsup.c | 6
drivers/scsi/aacraid/rx.c | 4
drivers/scsi/ch.c | 9
drivers/scsi/dpt_i2o.c | 17
drivers/scsi/ipr.c | 349 ++++++++++-
drivers/scsi/ipr.h | 33 +
drivers/scsi/libsas/sas_scsi_host.c | 36 -
drivers/scsi/lpfc/lpfc.h | 33 -
drivers/scsi/lpfc/lpfc_attr.c | 212 ++++--
drivers/scsi/lpfc/lpfc_crtn.h | 32 -
drivers/scsi/lpfc/lpfc_ct.c | 24
drivers/scsi/lpfc/lpfc_disc.h | 28
drivers/scsi/lpfc/lpfc_els.c | 552 +++++++-----------
drivers/scsi/lpfc/lpfc_hbadisc.c | 884 +++++++++++++----------------
drivers/scsi/lpfc/lpfc_hw.h | 11
drivers/scsi/lpfc/lpfc_init.c | 516 ++++++++--------
drivers/scsi/lpfc/lpfc_mbox.c | 3
drivers/scsi/lpfc/lpfc_nportdisc.c | 307 ++++------
drivers/scsi/lpfc/lpfc_scsi.c | 109 ++-
drivers/scsi/lpfc/lpfc_sli.c | 427 +++++++-------
drivers/scsi/lpfc/lpfc_sli.h | 12
drivers/scsi/lpfc/lpfc_version.h | 6
drivers/scsi/megaraid.c | 20
drivers/scsi/megaraid.h | 4
drivers/scsi/megaraid/megaraid_mm.c | 2
drivers/scsi/mesh.c | 14
drivers/scsi/qla1280.c | 2
drivers/scsi/qla2xxx/qla_init.c | 33 -
drivers/scsi/qla2xxx/qla_isr.c | 15
drivers/scsi/qla2xxx/qla_os.c | 6
drivers/scsi/qla2xxx/qla_version.h | 2
drivers/scsi/qla4xxx/ql4_dbg.c | 4
drivers/scsi/qla4xxx/ql4_glbl.h | 9
drivers/scsi/qla4xxx/ql4_init.c | 18
drivers/scsi/qla4xxx/ql4_iocb.c | 18
drivers/scsi/qla4xxx/ql4_mbx.c | 19
drivers/scsi/qla4xxx/ql4_os.c | 9
drivers/scsi/scsi_error.c | 3
drivers/scsi/scsi_transport_fc.c | 158 +++--
drivers/scsi/tmscsim.c | 225 ++-----
drivers/scsi/tmscsim.h | 12
include/scsi/libsas.h | 3
53 files changed, 2396 insertions(+), 2144 deletions(-)
James
next reply other threads:[~2007-05-09 1:17 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-09 1:17 James Bottomley [this message]
2007-05-09 18:14 ` Chuck Ebbert
2007-05-09 18:37 ` James Bottomley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1178673459.3737.114.camel@mulgrave.il.steeleye.com \
--to=james.bottomley@steeleye.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®