From: Michal Simek <michal.simek@xilinx.com>
To: Jolly Shah <jolly.shah@xilinx.com>, <ard.biesheuvel@linaro.org>,
<mingo@kernel.org>, <gregkh@linuxfoundation.org>,
<matt@codeblueprint.co.uk>, <sudeep.holla@arm.com>,
<hkallweit1@gmail.com>, <keescook@chromium.org>,
<dmitry.torokhov@gmail.com>, <michal.simek@xilinx.com>
Cc: <rajanv@xilinx.com>, <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
Rajan Vaja <rajan.vaja@xilinx.com>,
Jolly Shah <jollys@xilinx.com>
Subject: Re: [PATCH] drivers: Defer probe if firmware is not ready
Date: Mon, 18 Mar 2019 13:45:57 +0100 [thread overview]
Message-ID: <117a7428-4435-b155-06f1-79deae894a40@xilinx.com> (raw)
In-Reply-To: <1551741488-10226-1-git-send-email-jollys@xilinx.com>
On 05. 03. 19 0:18, Jolly Shah wrote:
> From: Rajan Vaja <rajan.vaja@xilinx.com>
>
> Driver needs ZynqMP firmware interface to call EEMI
> APIs. In case firmware is not ready, dependent drivers
> should wait until the firmware is ready.
>
> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
> Signed-off-by: Jolly Shah <jollys@xilinx.com>
> ---
> Documentation/xilinx/eemi.txt | 4 ++--
> drivers/clk/zynqmp/clkc.c | 4 ++--
> drivers/firmware/xilinx/zynqmp-debug.c | 3 ---
> drivers/firmware/xilinx/zynqmp.c | 11 ++++++++++-
> drivers/nvmem/zynqmp_nvmem.c | 10 +++++++---
> drivers/reset/reset-zynqmp.c | 8 ++++----
> drivers/soc/xilinx/zynqmp_pm_domains.c | 18 ++++++++++--------
> drivers/soc/xilinx/zynqmp_power.c | 10 ++++++----
> drivers/spi/spi-zynqmp-gqspi.c | 5 +++++
> include/linux/firmware/xlnx-zynqmp.h | 2 +-
> 10 files changed, 47 insertions(+), 28 deletions(-)
>
> diff --git a/Documentation/xilinx/eemi.txt b/Documentation/xilinx/eemi.txt
> index 0ab686c..5f39b4f 100644
> --- a/Documentation/xilinx/eemi.txt
> +++ b/Documentation/xilinx/eemi.txt
> @@ -41,8 +41,8 @@ Example of EEMI ops usage:
> int ret;
>
> eemi_ops = zynqmp_pm_get_eemi_ops();
> - if (!eemi_ops)
> - return -ENXIO;
> + if (IS_ERR(eemi_ops))
> + return PTR_ERR(eemi_ops);
>
> ret = eemi_ops->query_data(qdata, ret_payload);
>
> diff --git a/drivers/clk/zynqmp/clkc.c b/drivers/clk/zynqmp/clkc.c
> index c13b014..1e34e3e 100644
> --- a/drivers/clk/zynqmp/clkc.c
> +++ b/drivers/clk/zynqmp/clkc.c
> @@ -711,8 +711,8 @@ static int zynqmp_clock_probe(struct platform_device *pdev)
> struct device *dev = &pdev->dev;
>
> eemi_ops = zynqmp_pm_get_eemi_ops();
> - if (!eemi_ops)
> - return -ENXIO;
> + if (IS_ERR(eemi_ops))
> + return PTR_ERR(eemi_ops);
>
> ret = zynqmp_clk_setup(dev->of_node);
>
> diff --git a/drivers/firmware/xilinx/zynqmp-debug.c b/drivers/firmware/xilinx/zynqmp-debug.c
> index 2771df6..a3aa76c 100644
> --- a/drivers/firmware/xilinx/zynqmp-debug.c
> +++ b/drivers/firmware/xilinx/zynqmp-debug.c
> @@ -90,9 +90,6 @@ static int process_api_request(u32 pm_id, u64 *pm_api_arg, u32 *pm_api_ret)
> int ret;
> struct zynqmp_pm_query_data qdata = {0};
>
> - if (!eemi_ops)
> - return -ENXIO;
> -
> switch (pm_id) {
> case PM_GET_API_VERSION:
> ret = eemi_ops->get_api_version(&pm_api_version);
> diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
> index 98f9361..87a1d63 100644
> --- a/drivers/firmware/xilinx/zynqmp.c
> +++ b/drivers/firmware/xilinx/zynqmp.c
> @@ -24,6 +24,8 @@
> #include <linux/firmware/xlnx-zynqmp.h>
> #include "zynqmp-debug.h"
>
> +static const struct zynqmp_eemi_ops *eemi_ops_tbl;
> +
> static const struct mfd_cell firmware_devs[] = {
> {
> .name = "zynqmp_power_controller",
> @@ -649,7 +651,11 @@ static const struct zynqmp_eemi_ops eemi_ops = {
> */
> const struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
> {
> - return &eemi_ops;
> + if (eemi_ops_tbl)
> + return eemi_ops_tbl;
> + else
> + return ERR_PTR(-EPROBE_DEFER);
> +
> }
> EXPORT_SYMBOL_GPL(zynqmp_pm_get_eemi_ops);
>
> @@ -694,6 +700,9 @@ static int zynqmp_firmware_probe(struct platform_device *pdev)
> pr_info("%s Trustzone version v%d.%d\n", __func__,
> pm_tz_version >> 16, pm_tz_version & 0xFFFF);
>
> + /* Assign eemi_ops_table */
> + eemi_ops_tbl = &eemi_ops;
> +
> zynqmp_pm_api_debugfs_init();
>
> ret = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE, firmware_devs,
> diff --git a/drivers/nvmem/zynqmp_nvmem.c b/drivers/nvmem/zynqmp_nvmem.c
> index 490c8fc..5893543 100644
> --- a/drivers/nvmem/zynqmp_nvmem.c
> +++ b/drivers/nvmem/zynqmp_nvmem.c
> @@ -16,6 +16,8 @@ struct zynqmp_nvmem_data {
> struct nvmem_device *nvmem;
> };
>
> +static const struct zynqmp_eemi_ops *eemi_ops;
> +
> static int zynqmp_nvmem_read(void *context, unsigned int offset,
> void *val, size_t bytes)
> {
> @@ -23,9 +25,7 @@ static int zynqmp_nvmem_read(void *context, unsigned int offset,
> int idcode, version;
> struct zynqmp_nvmem_data *priv = context;
>
> - const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
> -
> - if (!eemi_ops || !eemi_ops->get_chipid)
> + if (!eemi_ops->get_chipid)
> return -ENXIO;
>
> ret = eemi_ops->get_chipid(&idcode, &version);
> @@ -61,6 +61,10 @@ static int zynqmp_nvmem_probe(struct platform_device *pdev)
> if (!priv)
> return -ENOMEM;
>
> + eemi_ops = zynqmp_pm_get_eemi_ops();
> + if (IS_ERR(eemi_ops))
> + return PTR_ERR(eemi_ops);
> +
> priv->dev = dev;
> econfig.dev = dev;
> econfig.reg_read = zynqmp_nvmem_read;
> diff --git a/drivers/reset/reset-zynqmp.c b/drivers/reset/reset-zynqmp.c
> index 2ef1f13..99e75d9 100644
> --- a/drivers/reset/reset-zynqmp.c
> +++ b/drivers/reset/reset-zynqmp.c
> @@ -79,11 +79,11 @@ static int zynqmp_reset_probe(struct platform_device *pdev)
> if (!priv)
> return -ENOMEM;
>
> - platform_set_drvdata(pdev, priv);
> -
> priv->eemi_ops = zynqmp_pm_get_eemi_ops();
> - if (!priv->eemi_ops)
> - return -ENXIO;
> + if (IS_ERR(priv->eemi_ops))
> + return PTR_ERR(priv->eemi_ops);
> +
> + platform_set_drvdata(pdev, priv);
>
> priv->rcdev.ops = &zynqmp_reset_ops;
> priv->rcdev.owner = THIS_MODULE;
> diff --git a/drivers/soc/xilinx/zynqmp_pm_domains.c b/drivers/soc/xilinx/zynqmp_pm_domains.c
> index 354d256..600f57c 100644
> --- a/drivers/soc/xilinx/zynqmp_pm_domains.c
> +++ b/drivers/soc/xilinx/zynqmp_pm_domains.c
> @@ -23,6 +23,8 @@
> /* Flag stating if PM nodes mapped to the PM domain has been requested */
> #define ZYNQMP_PM_DOMAIN_REQUESTED BIT(0)
>
> +static const struct zynqmp_eemi_ops *eemi_ops;
> +
> /**
> * struct zynqmp_pm_domain - Wrapper around struct generic_pm_domain
> * @gpd: Generic power domain
> @@ -71,9 +73,8 @@ static int zynqmp_gpd_power_on(struct generic_pm_domain *domain)
> {
> int ret;
> struct zynqmp_pm_domain *pd;
> - const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
>
> - if (!eemi_ops || !eemi_ops->set_requirement)
> + if (!eemi_ops->set_requirement)
> return -ENXIO;
>
> pd = container_of(domain, struct zynqmp_pm_domain, gpd);
> @@ -107,9 +108,8 @@ static int zynqmp_gpd_power_off(struct generic_pm_domain *domain)
> struct zynqmp_pm_domain *pd;
> u32 capabilities = 0;
> bool may_wakeup;
> - const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
>
> - if (!eemi_ops || !eemi_ops->set_requirement)
> + if (!eemi_ops->set_requirement)
> return -ENXIO;
>
> pd = container_of(domain, struct zynqmp_pm_domain, gpd);
> @@ -160,9 +160,8 @@ static int zynqmp_gpd_attach_dev(struct generic_pm_domain *domain,
> {
> int ret;
> struct zynqmp_pm_domain *pd;
> - const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
>
> - if (!eemi_ops || !eemi_ops->request_node)
> + if (!eemi_ops->request_node)
> return -ENXIO;
>
> pd = container_of(domain, struct zynqmp_pm_domain, gpd);
> @@ -197,9 +196,8 @@ static void zynqmp_gpd_detach_dev(struct generic_pm_domain *domain,
> {
> int ret;
> struct zynqmp_pm_domain *pd;
> - const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
>
> - if (!eemi_ops || !eemi_ops->release_node)
> + if (!eemi_ops->release_node)
> return;
>
> pd = container_of(domain, struct zynqmp_pm_domain, gpd);
> @@ -266,6 +264,10 @@ static int zynqmp_gpd_probe(struct platform_device *pdev)
> struct zynqmp_pm_domain *pd;
> struct device *dev = &pdev->dev;
>
> + eemi_ops = zynqmp_pm_get_eemi_ops();
> + if (IS_ERR(eemi_ops))
> + return PTR_ERR(eemi_ops);
> +
> pd = devm_kcalloc(dev, ZYNQMP_NUM_DOMAINS, sizeof(*pd), GFP_KERNEL);
> if (!pd)
> return -ENOMEM;
> diff --git a/drivers/soc/xilinx/zynqmp_power.c b/drivers/soc/xilinx/zynqmp_power.c
> index 771cb59..1b9d144 100644
> --- a/drivers/soc/xilinx/zynqmp_power.c
> +++ b/drivers/soc/xilinx/zynqmp_power.c
> @@ -31,6 +31,7 @@ static const char *const suspend_modes[] = {
> };
>
> static enum pm_suspend_mode suspend_mode = PM_SUSPEND_MODE_STD;
> +static const struct zynqmp_eemi_ops *eemi_ops;
>
> enum pm_api_cb_id {
> PM_INIT_SUSPEND_CB = 30,
> @@ -92,9 +93,8 @@ static ssize_t suspend_mode_store(struct device *dev,
> const char *buf, size_t count)
> {
> int md, ret = -EINVAL;
> - const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
>
> - if (!eemi_ops || !eemi_ops->set_suspend_mode)
> + if (!eemi_ops->set_suspend_mode)
> return ret;
>
> for (md = PM_SUSPEND_MODE_FIRST; md < ARRAY_SIZE(suspend_modes); md++)
> @@ -120,9 +120,11 @@ static int zynqmp_pm_probe(struct platform_device *pdev)
> int ret, irq;
> u32 pm_api_version;
>
> - const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
> + eemi_ops = zynqmp_pm_get_eemi_ops();
> + if (IS_ERR(eemi_ops))
> + return PTR_ERR(eemi_ops);
>
> - if (!eemi_ops || !eemi_ops->get_api_version || !eemi_ops->init_finalize)
> + if (!eemi_ops->get_api_version || !eemi_ops->init_finalize)
> return -ENXIO;
>
> eemi_ops->init_finalize();
> diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
> index 9f83e1b..d07b6f9 100644
> --- a/drivers/spi/spi-zynqmp-gqspi.c
> +++ b/drivers/spi/spi-zynqmp-gqspi.c
> @@ -138,6 +138,7 @@
>
> #define SPI_AUTOSUSPEND_TIMEOUT 3000
> enum mode_type {GQSPI_MODE_IO, GQSPI_MODE_DMA};
> +static const struct zynqmp_eemi_ops *eemi_ops;
>
> /**
> * struct zynqmp_qspi - Defines qspi driver instance
> @@ -1021,6 +1022,10 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
> struct resource *res;
> struct device *dev = &pdev->dev;
>
> + eemi_ops = zynqmp_pm_get_eemi_ops();
> + if (IS_ERR(eemi_ops))
> + return PTR_ERR(eemi_ops);
> +
> master = spi_alloc_master(&pdev->dev, sizeof(*xqspi));
> if (!master)
> return -ENOMEM;
> diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
> index 642dab1..3533ee5 100644
> --- a/include/linux/firmware/xlnx-zynqmp.h
> +++ b/include/linux/firmware/xlnx-zynqmp.h
> @@ -293,7 +293,7 @@ const struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void);
> #else
> static inline struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
> {
> - return NULL;
> + return ERR_PTR(-ENODEV);
> }
> #endif
>
>
Applied via zynqmp/soc tree.
Thanks,
Michal
prev parent reply other threads:[~2019-03-18 12:46 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-04 23:18 Jolly Shah
2019-03-18 12:45 ` Michal Simek [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=117a7428-4435-b155-06f1-79deae894a40@xilinx.com \
--to=michal.simek@xilinx.com \
--cc=ard.biesheuvel@linaro.org \
--cc=dmitry.torokhov@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=hkallweit1@gmail.com \
--cc=jolly.shah@xilinx.com \
--cc=jollys@xilinx.com \
--cc=keescook@chromium.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=matt@codeblueprint.co.uk \
--cc=mingo@kernel.org \
--cc=rajan.vaja@xilinx.com \
--cc=rajanv@xilinx.com \
--cc=sudeep.holla@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®