From: Zilvinas Valinskas <zilvinas@wilibox.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: Linux 2.6.23-rc3
Date: Mon, 13 Aug 2007 15:23:13 +0300 [thread overview]
Message-ID: <1187007793.5717.11.camel@zv.wilibox.com> (raw)
In-Reply-To: <alpine.LFD.0.999.0708122143240.30176@woody.linux-foundation.org>
Hello lkml,
Linux kernel v2.6.23-rc3 booted ok and so far everything is fine. I have
HP Compaq nx9420 laptop (Dual Core).
Just a few things that I found interesting:
1. /sys/devices/system/clocksource/clocksource0/*
$ sudo grep . *
available_clocksource:hpet hpet acpi_pm jiffies tsc
^^^^^^^^^ listed twice ;) not a big deal but still.
current_clocksource:hpet
^^^^ seems selected ;) although in dmesg there are
$ dmesg | grep -i hpet
$ dmesg | grep -i hpet
ACPI: HPET 7FFE59BC, 0038 (r1 HP 309F 1 HP 1)
ACPI: HPET id: 0x8086a201 base: 0xfed00000
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
hpet_resources: 0xfed00000 is busy
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ? strange.
Time: hpet clocksource has been installed.
2. ACPI related (?) - one fan is always on, even when system is idling.
It never stops ;)
$ acpi -bt
Battery 1: charged, 98%
Thermal 1: ok, 48.0 degrees C
Thermal 2: ok, 38.0 degrees C
Thermal 3: active[5], 47.0 degrees C
Thermal 4: ok, 37.0 degrees C
Thermal 5: ok, 32.0 degrees C
Thermal 6: ok, 25.0 degrees C
In earlier kernel versions it was turned on when needed (mostly during
compilation ...) and then when system is cooled enough fan was
automatically turned off.
3. the same messages are printed twice (2.6.23-rc2 was fine).
Brought up 2 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: EC: Look up EC in DSDT
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
^^^^^^^^^^^^^^^^^^^^^^^^ 1st time
ACPI: Interpreter enabled
ACPI: (supports S0 S3)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
^^^^^^^^^^^^^^^^^^^^^^^^ 2nd time
ACPI: PCI Root Bridge [C003] (0000:00)
Otherwise I am happy with 2.6.23-rc3. Thank y'all ;)
Best regards,
Zilvinas
next prev parent reply other threads:[~2007-08-13 15:14 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-13 4:50 Linus Torvalds
2007-08-13 6:25 ` Michal Piotrowski
2007-08-13 12:23 ` Zilvinas Valinskas [this message]
2007-08-13 16:49 ` Michal Piotrowski
2007-08-14 10:14 ` Zilvinas Valinskas
2007-08-14 10:10 ` Zilvinas Valinskas
2007-08-14 9:10 ` Tore Anderson
2007-08-14 11:24 ` Matthew Wilcox
2007-08-14 13:04 ` James Smart
[not found] ` <1187186897.1457.57.camel@potomac.tworiverlabs.com>
2007-08-15 14:47 ` Matthew Wilcox
2007-08-14 18:31 ` Tore Anderson
2007-08-15 12:59 ` Tore Anderson
2007-08-14 12:25 ` James Smart
2007-08-14 13:07 ` Tore Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1187007793.5717.11.camel@zv.wilibox.com \
--to=zilvinas@wilibox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®