From: Mel Gorman <mel@csn.ul.ie>
To: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: LKML <linux-kernel@vger.kernel.org>,
Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [PATCH] CONFIG_ZONE_MOVABLE [2/2] config zone movable
Date: Thu, 06 Sep 2007 15:16:49 +0100 [thread overview]
Message-ID: <1189088209.3834.24.camel@machina.109elm.lan> (raw)
In-Reply-To: <20070831191415.a111636b.kamezawa.hiroyu@jp.fujitsu.com>
On Fri, 2007-08-31 at 19:14 +0900, KAMEZAWA Hiroyuki wrote:
> Makes ZONE_MOVABLE as configurable
>
> Based on "zone_ifdef_cleanup_by_renumbering.patch"
>
> Signed-Off-By: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
>
Again, looks ok. Will test it early next week. We shouldn't forget that
the logical follow-up is to make ZONE_NORMAL optional where possible.
>
>
> Index: devel-2.6.23-rc3-mm1/include/linux/mmzone.h
> ===================================================================
> --- devel-2.6.23-rc3-mm1.orig/include/linux/mmzone.h
> +++ devel-2.6.23-rc3-mm1/include/linux/mmzone.h
> @@ -177,7 +177,9 @@ enum zone_type {
> */
> ZONE_HIGHMEM,
> #endif
> +#ifdef CONFIG_ZONE_MOVABLE
> ZONE_MOVABLE,
> +#endif
> MAX_NR_ZONES,
> #ifndef CONFIG_ZONE_DMA
> ZONE_DMA,
> @@ -188,6 +190,9 @@ enum zone_type {
> #ifndef CONFIG_HIGHMEM
> ZONE_HIGHMEM,
> #endif
> +#ifndef CONFIG_ZONE_MOVABLE
> + ZONE_MOVABLE,
> +#endif
> };
>
> /*
> @@ -612,11 +617,13 @@ static inline int zone_idx_is(enum zone_
>
> static inline int zone_movable_is_highmem(void)
> {
> -#if CONFIG_ARCH_POPULATES_NODE_MAP
> - if (is_configured_zone(ZONE_HIGHMEM))
> - return movable_zone == ZONE_HIGHMEM;
> -#endif
> +#ifdef CONFIG_ARCH_POPULATES_NODE_MAP
> + return is_configured_zone(ZONE_HIGHMEM) &&
> + is_configured_zone(ZONE_MOVABLE) &&
> + (movable_zone == ZONE_HIGHMEM);
> +#else
> return 0;
> +#endif
> }
>
> static inline int is_highmem_idx(enum zone_type idx)
> Index: devel-2.6.23-rc3-mm1/include/linux/gfp.h
> ===================================================================
> --- devel-2.6.23-rc3-mm1.orig/include/linux/gfp.h
> +++ devel-2.6.23-rc3-mm1/include/linux/gfp.h
> @@ -130,7 +130,8 @@ static inline enum zone_type gfp_zone(gf
> if (is_configured_zone(ZONE_DMA32) && (flags & __GFP_DMA32))
> return base + ZONE_DMA32;
>
> - if ((flags & (__GFP_HIGHMEM | __GFP_MOVABLE)) ==
> + if (is_configured_zone(ZONE_MOVABLE) &&
> + (flags & (__GFP_HIGHMEM | __GFP_MOVABLE)) ==
> (__GFP_HIGHMEM | __GFP_MOVABLE))
> return base + ZONE_MOVABLE;
>
> Index: devel-2.6.23-rc3-mm1/mm/Kconfig
> ===================================================================
> --- devel-2.6.23-rc3-mm1.orig/mm/Kconfig
> +++ devel-2.6.23-rc3-mm1/mm/Kconfig
> @@ -125,6 +125,18 @@ config SPARSEMEM_VMEMMAP
> depends on SPARSEMEM
> default y if (SPARSEMEM_VMEMMAP_ENABLE)
>
> +
> +config ZONE_MOVABLE
> + bool "Zone for movable pages"
> + depends on ARCH_POPULATES_NODE_MAP
> + help
> + Allows creating a zone type only for movable pages, e.g. page cache
> + and anonymous memory. Because movable pages are easily reclaimed
> + and page migration technique can move them, your chance for allocating
> + contiguous memory such as huge pages will be better than other zones.
> + To use this zone, please see "kernelcore=" or "movablecore=" in
> + Documentation/kernel-parameters.txt
> +
> # eventually, we can have this option just 'select SPARSEMEM'
> config MEMORY_HOTPLUG
> bool "Allow for memory hot-add"
> Index: devel-2.6.23-rc3-mm1/mm/page_alloc.c
> ===================================================================
> --- devel-2.6.23-rc3-mm1.orig/mm/page_alloc.c
> +++ devel-2.6.23-rc3-mm1/mm/page_alloc.c
> @@ -95,7 +95,9 @@ int sysctl_lowmem_reserve_ratio[MAX_NR_Z
> #ifdef CONFIG_HIGHMEM
> 32,
> #endif
> +#ifdef CONFIG_ZONE_MOVABLE
> 32,
> +#endif
> };
>
> EXPORT_SYMBOL(totalram_pages);
> @@ -4000,6 +4002,10 @@ static int __init cmdline_parse_core(cha
> if (!p)
> return -EINVAL;
>
> + if (!is_configured_zone(ZONE_MOVABLE)) {
> + printk ("ZONE_MOVABLE is not configured, %s is ignored.\n",p);
> + return 0;
> + }
> coremem = memparse(p, &p);
> *core = coremem >> PAGE_SHIFT;
>
> Index: devel-2.6.23-rc3-mm1/mm/vmstat.c
> ===================================================================
> --- devel-2.6.23-rc3-mm1.orig/mm/vmstat.c
> +++ devel-2.6.23-rc3-mm1/mm/vmstat.c
> @@ -678,8 +678,14 @@ const struct seq_operations pagetypeinfo
> #define TEXT_FOR_HIGHMEM(xx)
> #endif
>
> +#ifdef CONFIG_ZONE_MOVABLE
> +#define TEXT_FOR_MOVABLE(xx) xx "_movable",
> +#else
> +#define TEXT_FOR_MOVABLE(xx)
> +#endif
> +
> #define TEXTS_FOR_ZONES(xx) TEXT_FOR_DMA(xx) TEXT_FOR_DMA32(xx) xx "_normal", \
> - TEXT_FOR_HIGHMEM(xx) xx "_movable",
> + TEXT_FOR_HIGHMEM(xx) xx TEXT_FOR_MOVABLE(xx)
>
> static const char * const vmstat_text[] = {
> /* Zoned VM counters */
> Index: devel-2.6.23-rc3-mm1/include/linux/vmstat.h
> ===================================================================
> --- devel-2.6.23-rc3-mm1.orig/include/linux/vmstat.h
> +++ devel-2.6.23-rc3-mm1/include/linux/vmstat.h
> @@ -25,7 +25,14 @@
> #define HIGHMEM_ZONE(xx)
> #endif
>
> -#define FOR_ALL_ZONES(xx) DMA_ZONE(xx) DMA32_ZONE(xx) xx##_NORMAL HIGHMEM_ZONE(xx) , xx##_MOVABLE
> +#ifdef CONFIG_ZONE_MOVABLE
> +#define MOVABLE_ZONE(xx) , xx##_MOVABLE
> +#else
> +#define MOVABLE_ZONE(xx)
> +#endif
> +
> +
> +#define FOR_ALL_ZONES(xx) DMA_ZONE(xx) DMA32_ZONE(xx) xx##_NORMAL HIGHMEM_ZONE(xx) MOVABLE_ZONE(xx)
>
> enum vm_event_item { PGPGIN, PGPGOUT, PSWPIN, PSWPOUT,
> FOR_ALL_ZONES(PGALLOC),
> @@ -170,7 +177,9 @@ static inline unsigned long node_page_st
> if (is_configured_zone(ZONE_HIGHMEM))
> val += zone_page_state(&zones[ZONE_HIGHMEM], item);
>
> - val += zone_page_state(&zones[ZONE_MOVABLE], item);
> + if (is_configured_zone(ZONE_MOVABLE))
> + val += zone_page_state(&zones[ZONE_MOVABLE], item);
> +
> return val;
> }
>
>
next prev parent reply other threads:[~2007-09-06 13:21 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-31 10:12 [PATCH] CONFIG_ZONE_MOVABLE [0/2] introduction KAMEZAWA Hiroyuki
2007-08-31 10:13 ` [PATCH] CONFIG_ZONE_MOVABLE [1/2] zone ifdef cleanup by renumbering KAMEZAWA Hiroyuki
2007-09-06 14:14 ` Mel Gorman
2007-08-31 10:14 ` [PATCH] CONFIG_ZONE_MOVABLE [2/2] config zone movable KAMEZAWA Hiroyuki
2007-09-06 14:16 ` Mel Gorman [this message]
2007-09-18 2:47 ` Andrew Morton
2007-09-18 3:02 ` KAMEZAWA Hiroyuki
-- strict thread matches above, loose matches on Subject: below --
2007-07-26 2:50 [PATCH] config_zone_movable [1/2] clean up zone config by renumbering KAMEZAWA Hiroyuki
2007-07-26 2:51 ` [PATCH] config_zone_movable [2/2] config_zone_movable KAMEZAWA Hiroyuki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1189088209.3834.24.camel@machina.109elm.lan \
--to=mel@csn.ul.ie \
--cc=akpm@linux-foundation.org \
--cc=kamezawa.hiroyu@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®