From: bo yang <bo.yang@lsi.com>
To: linux-scsi@vger.kernel.org
Cc: James.Bottomley@SteelEye.com, akpm@osdl.org,
linux-kernel@vger.kernel.org, Bo.yang@lsi.com,
Sumant.patro@lsi.com
Subject: [PATCH 7/8] scsi: megaraid_sas - support for poll_mode_io (reduced interrupt)
Date: Wed, 26 Sep 2007 11:51:47 -0400 [thread overview]
Message-ID: <1190821907.5955.30.camel@dhcp-75-534.se.lsil.com> (raw)
Added module parameter "poll_mode_io" to support for "polling" (reduced interrupt operation).
In this mode, IO completion interrupts are delayed. At the end of initiating IOs,
the driver schedules for cmd completion if there are pending cmds.
A timer-based interrupt has also been added to prevent IO completion from
being delayed indefinitely in the case that no new IOs are initiated.
Some formatting issues in resume, suspend comment block also corrected
Signed-off-by: Bo Yang <bo.yang@lsi.com>
---
drivers/scsi/megaraid/megaraid_sas.c | 152 ++++++++++++++++++++++++-
drivers/scsi/megaraid/megaraid_sas.h | 3
2 files changed, 149 insertions(+), 6 deletions(-)
diff -uprN linux-2.6.22_orig/drivers/scsi/megaraid/megaraid_sas.c linux-2.6.22_new/drivers/scsi/megaraid/megaraid_sas.c
--- linux-2.6.22_orig/drivers/scsi/megaraid/megaraid_sas.c 2007-09-27 21:32:23.000000000 -0700
+++ linux-2.6.22_new/drivers/scsi/megaraid/megaraid_sas.c 2007-09-27 21:43:52.000000000 -0700
@@ -79,6 +79,14 @@ module_param_named(cmd_per_lun, cmd_per_
MODULE_PARM_DESC(cmd_per_lun,
"Maximum number of commands per logical unit (default=128)");
+/*
+ * poll_mode_io:1- schedule complete completion from q cmd
+ */
+static unsigned int poll_mode_io;
+module_param_named(poll_mode_io, poll_mode_io, int, 0);
+MODULE_PARM_DESC(poll_mode_io,
+ "Complete cmds from IO path, (default=0)");
+
MODULE_LICENSE("GPL");
MODULE_VERSION(MEGASAS_VERSION);
MODULE_AUTHOR("megaraidlinux@lsi.com");
@@ -892,6 +900,12 @@ megasas_queue_command(struct scsi_cmnd *
atomic_inc(&instance->fw_outstanding);
instance->instancet->fire_cmd(cmd->frame_phys_addr ,cmd->frame_count-1,instance->reg_set);
+ /*
+ * Check if we have pend cmds to be completed
+ */
+ if (poll_mode_io && atomic_read(&instance->fw_outstanding))
+ tasklet_schedule(&instance->isr_tasklet);
+
return 0;
@@ -1947,6 +1961,47 @@ fail_fw_init:
}
/**
+ * megasas_start_timer - Initializes a timer object
+ * @instance: Adapter soft state
+ * @timer: timer object to be initialized
+ * @fn: timer function
+ * @interval: time interval between timer function call
+ */
+static inline void
+megasas_start_timer(struct megasas_instance *instance,
+ struct timer_list *timer,
+ void *fn, unsigned long interval)
+{
+ init_timer(timer);
+ timer->expires = jiffies + interval;
+ timer->data = (unsigned long)instance;
+ timer->function = fn;
+ add_timer(timer);
+}
+
+/**
+ * megasas_io_completion_timer - Timer fn
+ * @instance_addr: Address of adapter soft state
+ *
+ * Schedules tasklet for cmd completion
+ * if poll_mode_io is set
+ */
+static void
+megasas_io_completion_timer(unsigned long instance_addr)
+{
+ struct megasas_instance *instance =
+ (struct megasas_instance *)instance_addr;
+
+ if (atomic_read(&instance->fw_outstanding))
+ tasklet_schedule(&instance->isr_tasklet);
+
+ /* Restart timer */
+ if (poll_mode_io)
+ mod_timer(&instance->io_completion_timer,
+ jiffies + MEGASAS_COMPLETION_TIMER_INTERVAL);
+}
+
+/**
* megasas_init_mfi - Initializes the FW
* @instance: Adapter soft state
*
@@ -2073,8 +2128,14 @@ static int megasas_init_mfi(struct megas
* Setup tasklet for cmd completion
*/
- tasklet_init(&instance->isr_tasklet, megasas_complete_cmd_dpc,
- (unsigned long)instance);
+ tasklet_init(&instance->isr_tasklet, megasas_complete_cmd_dpc,
+ (unsigned long)instance);
+
+ /* Initialize the cmd completion timer */
+ if (poll_mode_io)
+ megasas_start_timer(instance, &instance->io_completion_timer,
+ megasas_io_completion_timer,
+ MEGASAS_COMPLETION_TIMER_INTERVAL);
return 0;
fail_fw_init:
@@ -2705,8 +2766,8 @@ static void megasas_shutdown_controller(
}
/**
- * megasas_suspend - driver suspend entry point
- * @pdev: PCI device structure
+ * megasas_suspend - driver suspend entry point
+ * @pdev: PCI device structure
* @state: PCI power state to suspend routine
*/
static int __devinit
@@ -2718,6 +2779,9 @@ megasas_suspend(struct pci_dev *pdev, pm
instance = pci_get_drvdata(pdev);
host = instance->host;
+ if (poll_mode_io)
+ del_timer_sync(&instance->io_completion_timer);
+
megasas_flush_cache(instance);
megasas_shutdown_controller(instance, MR_DCMD_HIBERNATE_SHUTDOWN);
tasklet_kill(&instance->isr_tasklet);
@@ -2804,6 +2868,11 @@ megasas_resume(struct pci_dev *pdev)
if (megasas_start_aen(instance))
printk(KERN_ERR "megasas: Start AEN failed\n");
+ /* Initialize the cmd completion timer */
+ if (poll_mode_io)
+ megasas_start_timer(instance, &instance->io_completion_timer,
+ megasas_io_completion_timer,
+ MEGASAS_COMPLETION_TIMER_INTERVAL);
return 0;
fail_irq:
@@ -2842,6 +2911,9 @@ static void megasas_detach_one(struct pc
instance = pci_get_drvdata(pdev);
host = instance->host;
+ if (poll_mode_io)
+ del_timer_sync(&instance->io_completion_timer);
+
sysfs_remove_bin_file(&host->shost_classdev.kobj,
&sysfs_max_sectors_attr);
scsi_remove_host(instance->host);
@@ -3303,7 +3375,7 @@ static DRIVER_ATTR(release_date, S_IRUGO
static ssize_t
megasas_sysfs_show_dbg_lvl(struct device_driver *dd, char *buf)
{
- return sprintf(buf,"%u",megasas_dbg_lvl);
+ return sprintf(buf, "%u\n", megasas_dbg_lvl);
}
static ssize_t
@@ -3318,7 +3390,65 @@ megasas_sysfs_set_dbg_lvl(struct device_
}
static DRIVER_ATTR(dbg_lvl, S_IRUGO|S_IWUGO, megasas_sysfs_show_dbg_lvl,
- megasas_sysfs_set_dbg_lvl);
+ megasas_sysfs_set_dbg_lvl);
+
+static ssize_t
+megasas_sysfs_show_poll_mode_io(struct device_driver *dd, char *buf)
+{
+ return sprintf(buf, "%u\n", poll_mode_io);
+}
+
+static ssize_t
+megasas_sysfs_set_poll_mode_io(struct device_driver *dd,
+ const char *buf, size_t count)
+{
+ int retval = count;
+ int tmp = poll_mode_io;
+ int i;
+ struct megasas_instance *instance;
+
+ if (sscanf(buf, "%u", &poll_mode_io) < 1) {
+ printk(KERN_ERR "megasas: could not set poll_mode_io\n");
+ retval = -EINVAL;
+ }
+
+ /*
+ * Check if poll_mode_io is already set or is same as previous value
+ */
+ if ((tmp && poll_mode_io) || (tmp == poll_mode_io))
+ goto out;
+
+ if (poll_mode_io) {
+ /*
+ * Start timers for all adapters
+ */
+ for (i = 0; i < megasas_mgmt_info.max_index; i++) {
+ instance = megasas_mgmt_info.instance[i];
+ if (instance) {
+ megasas_start_timer(instance,
+ &instance->io_completion_timer,
+ megasas_io_completion_timer,
+ MEGASAS_COMPLETION_TIMER_INTERVAL);
+ }
+ }
+ } else {
+ /*
+ * Delete timers for all adapters
+ */
+ for (i = 0; i < megasas_mgmt_info.max_index; i++) {
+ instance = megasas_mgmt_info.instance[i];
+ if (instance)
+ del_timer_sync(&instance->io_completion_timer);
+ }
+ }
+
+out:
+ return retval;
+}
+
+static DRIVER_ATTR(poll_mode_io, S_IRUGO|S_IWUGO,
+ megasas_sysfs_show_poll_mode_io,
+ megasas_sysfs_set_poll_mode_io);
/**
* megasas_init - Driver load entry point
@@ -3369,8 +3499,16 @@ static int __init megasas_init(void)
&driver_attr_dbg_lvl);
if (rval)
goto err_dcf_dbg_lvl;
+ rval = driver_create_file(&megasas_pci_driver.driver,
+ &driver_attr_poll_mode_io);
+ if (rval)
+ goto err_dcf_poll_mode_io;
return rval;
+
+err_dcf_poll_mode_io:
+ driver_remove_file(&megasas_pci_driver.driver,
+ &driver_attr_dbg_lvl);
err_dcf_dbg_lvl:
driver_remove_file(&megasas_pci_driver.driver,
&driver_attr_release_date);
@@ -3389,6 +3527,8 @@ err_pcidrv:
static void __exit megasas_exit(void)
{
driver_remove_file(&megasas_pci_driver.driver,
+ &driver_attr_poll_mode_io);
+ driver_remove_file(&megasas_pci_driver.driver,
&driver_attr_dbg_lvl);
driver_remove_file(&megasas_pci_driver.driver,
&driver_attr_release_date);
diff -uprN linux-2.6.22_orig/drivers/scsi/megaraid/megaraid_sas.h linux-2.6.22_new/drivers/scsi/megaraid/megaraid_sas.h
--- linux-2.6.22_orig/drivers/scsi/megaraid/megaraid_sas.h 2007-09-27 05:08:55.000000000 -0700
+++ linux-2.6.22_new/drivers/scsi/megaraid/megaraid_sas.h 2007-09-27 22:35:32.000000000 -0700
@@ -573,6 +573,7 @@ struct megasas_ctrl_info {
#define MFI_OB_INTR_STATUS_MASK 0x00000002
#define MFI_POLL_TIMEOUT_SECS 60
+#define MEGASAS_COMPLETION_TIMER_INTERVAL (HZ/10)
#define MFI_REPLY_1078_MESSAGE_INTERRUPT 0x80000000
@@ -1113,6 +1114,8 @@ struct megasas_instance {
u8 flag;
unsigned long last_time;
+
+ struct timer_list io_completion_timer;
};
#define MEGASAS_IS_LOGICAL(scp) \
next reply other threads:[~2007-09-28 20:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-26 15:51 bo yang [this message]
2007-09-28 21:58 ` Brian King
2007-10-01 16:14 bo yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1190821907.5955.30.camel@dhcp-75-534.se.lsil.com \
--to=bo.yang@lsi.com \
--cc=James.Bottomley@SteelEye.com \
--cc=Sumant.patro@lsi.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®