[PATCH] ftdi_sio: fix FT232RL support for TIOCMGET

[Bernardo Innocenti <bernie@codewiz.org>]

From: Francesco Sacchi <batt@develer.com>

Reading serial port status lines was broken on the FT232RL since when it
has been detected as a separate chip (2.6.22+).  Previously, it would work
because it was just handled as an FT232BM.

Additionally, we were also forgetting to remove the dev_attr_latency_timer
sysfs file in the FT232RL case.

Note by Bernardo Innocenti: the ftdi_sio maintainer appears to have stepped
down, so I'm sending this to Greg Kroah-Hartman as the generic USB serial
maintainer.  Please, let me know if this is not appropriate.

Signed-Off-By: Francesco Sacchi <batt@develer.com>
Signed-Off-By: Bernardo Innocenti <bernie@codewiz.org>

---
 drivers/usb/serial/ftdi_sio.c |    7 +++++--
 1 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 2d04585..940b0c4 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -892,7 +892,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port)
 		break;
 	case FT232BM: /* FT232BM chip */
 	case FT2232C: /* FT2232C chip */
-	case FT232RL:
+	case FT232RL: /* FT232RL chip */
 		if (baud <= 3000000) {
 			div_value = ftdi_232bm_baud_to_divisor(baud);
 		} else {
@@ -1169,7 +1169,9 @@ static void remove_sysfs_attrs(struct usb_serial_port *port)
 	/* XXX see create_sysfs_attrs */
 	if (priv->chip_type != SIO) {
 		device_remove_file(&port->dev, &dev_attr_event_char);
-		if (priv->chip_type == FT232BM || priv->chip_type == FT2232C) {
+		if (priv->chip_type == FT232BM ||
+		    priv->chip_type == FT2232C ||
+		    priv->chip_type == FT232RL) {
 			device_remove_file(&port->dev, &dev_attr_latency_timer);
 		}
 	}
@@ -2102,6 +2104,7 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file)
 	case FT8U232AM:
 	case FT232BM:
 	case FT2232C:
+	case FT232RL:
 		/* the 8U232AM returns a two byte value (the sio is a 1 byte value) - in the same
 		   format as the data returned from the in point */
 		if ((ret = usb_control_msg(port->serial->dev,
-- 
1.5.2.3