Hi, Using the 2.6.23.1 kernel and Debian Etch on a Lenovo Thinkpad T61 7659A21, I am getting two weird errors, as follows: ata1.00: exception Emask 0x2 SAct 0x1c SErr 0x0 action 0x2 frozen ata1.00: spurious completions during NCQ issue=0x0 SAct=0x1c FIS=005040a1:00000002 ata1.00: cmd 60/17:10:28:01:00/00:00:00:00:00/40 tag 2 cdb 0x0 data 11776 in res 50/00:30:bf:01:00/00:00:00:00:00/40 Emask 0x2 (HSM violation) ata1.00: cmd 60/80:18:3f:01:00/00:00:00:00:00/40 tag 3 cdb 0x0 data 65536 in res 50/00:30:bf:01:00/00:00:00:00:00/40 Emask 0x2 (HSM violation) ata1.00: cmd 60/30:20:bf:01:00/00:00:00:00:00/40 tag 4 cdb 0x0 data 24576 in res 50/00:30:bf:01:00/00:00:00:00:00/40 Emask 0x2 (HSM violation) ... irq 19: nobody cared (try booting with the "irqpoll" option) Call Trace: [] __report_bad_irq+0x1e/0x80 [] note_interrupt+0x29d/0x2e0 [] handle_fasteoi_irq+0xdd/0x110 [] call_softirq+0x1c/0x30 [] do_IRQ+0x7b/0x100 [] ret_from_intr+0x0/0xa handlers: [] (usb_hcd_irq+0x0/0x60) Disabling IRQ #19 I have tried booting with the irqpoll option, but this results in the automounter doing weird things with the optical drive. Specifically, it sporadically mounts an audio disc with weird negative-sized tracks, even if there is no disc inserted in the drive. Also, regardless of whether I boot with irqpoll or not, chrony frequently uses up 100% of one CPU. The chrony measurements.log, statistics.log and tracking.log all show normal activity (ie: a "normal" volume of entries, vis a vis chrony on other machines where CPU usage is normal). I don't know if this is related. Any clues? I have attached the following: 1. Kernel configuration 2. dmesg output 3. lspci output 4. chrony.conf (if it matters) Please cc me with replies, as I am not on the list. Thank you very much. Cheers! -- Federico Sevilla III F S 3 Consulting Inc. http://www.fs3.ph