From: "Martin J. Bligh" <mbligh@aracnet.com>
To: linux-kernel <linux-kernel@vger.kernel.org>
Subject: [Bug 749] New: Changing the CPU frequency using CPUFREQ hangs the kernel
Date: Tue, 27 May 2003 08:47:37 -0700 [thread overview]
Message-ID: <11950000.1054050457@[10.10.2.4]> (raw)
Summary: Changing the CPU frequency using CPUFREQ hangs the
kernel
Kernel Version: 2.5.70
Status: NEW
Severity: normal
Owner: bugme-janitors@lists.osdl.org
Submitter: harisri@bigpond.com
Distribution: Red Hat
Hardware Environment: Compaq EVO N1015v - AMD Athlon 1800+, 512 MB RAM, IDE
HDD/DVD etc..
Software Environment: 2.5.70, Gnc C 3.2.2, Linux C Library 2.3.2
Problem Description: Changing the CPU frequency hangs the kernel (except this
one time under X it just rebooted it :( )
Steps to reproduce:
Consider the following two shell scripts
1. powersave.sh
# !/bin/bash
echo 532000 > /sys/class/cpu/cpu0/cpufreq/scaling_max_freq
echo powersave > /sys/class/cpu/cpu0/cpufreq/scaling_governor
2. performance.sh
# !/bin/bash
echo 1529500 > /sys/class/cpu/cpu0/cpufreq/scaling_max_freq
echo performance > /sys/class/cpu/cpu0/cpufreq/scaling_governor
No problem while executing powersave.sh, but the kernel hangs after executing
performance.sh. No sysrq response. AFAIK cpufreq on this same machine worked
fine during 2.5.68 (although the sysfs cpufreq files were in a different
directory location back then).
Here is the /var/log/messages information relating to the Athlon 1800+:
May 28 19:57:57 laptop kernel: powernow: AMD K7 CPU detected.
May 28 19:57:57 laptop kernel: powernow: PowerNOW! Technology present. Can scale
: frequency and voltage.
May 28 19:57:57 laptop kernel: powernow: Found PSB header at c00f0800
May 28 19:57:57 laptop kernel: powernow: Table version: 0x12
May 28 19:57:57 laptop kernel: powernow: Flags: 0x0 (Mobile voltage regulator)
May 28 19:57:57 laptop kernel: powernow: Settling Time: 100 microseconds.
May 28 19:57:57 laptop kernel: powernow: Has 31 PST tables. (Only dumping ones r
elevant to this CPU).
May 28 19:57:57 laptop kernel: powernow: PST:24 (@c00f099e)
May 28 19:57:57 laptop kernel: powernow: cpuid: 0x780^Ifsb: 133^ImaxFID: 0x1^Is
tartvid: 0x9
May 28 19:57:57 laptop kernel: powernow: FID: 0x12 (4.0x [532MHz])^IVID: 0x13
(1.200V)
May 28 19:57:57 laptop kernel: powernow: FID: 0x4 (5.0x [665MHz])^IVID: 0x13
(1.200V)
May 28 19:57:57 laptop kernel: powernow: FID: 0x6 (6.0x [798MHz])^IVID: 0x13
(1.200V)
May 28 19:57:57 laptop kernel: powernow: FID: 0xc (9.0x [1197MHz])^IVID: 0xd
(1.350V)
May 28 19:57:57 laptop kernel: powernow: FID: 0x1 (11.5x [1529MHz])^IVID: 0x9
(1.550V)
May 28 19:57:57 laptop kernel:
May 28 19:57:57 laptop kernel: powernow: Minimum speed 532 MHz. Maximum speed 15
29 MHz.
My relavant .config section for CPUFREQ:
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_POWERNOW_K7=y
The 'lspci' output from the computer:
00:00.0 Host bridge: ATI Technologies Inc: Unknown device cab0 (rev 13)
00:01.0 PCI bridge: ATI Technologies Inc U1/A3 AGP Bridge [IGP 320M] (rev 01)
00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
00:08.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link
Controller Audio Device (rev 02)
00:0a.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller
(rev 02)
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 20)
00:0c.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
00:0f.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4)
00:11.0 Bridge: ALi Corporation M7101 PMU
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility U1
Thanks
Hari
harisri@bigpond.com
reply other threads:[~2003-05-27 15:34 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='11950000.1054050457@[10.10.2.4]' \
--to=mbligh@aracnet.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®