PCI resource unavailable on mips

[Jon Dufresne <jon.dufresne@infinitevideocorporation.com>]

Hi,

I've done a bit of linux driver development on x86 in the past.
Currently I am working on my first ever linux driver for a mips box. I
started by testing the device in an x86 box and got it reasonable stable
and am now testing it in the mips box. There appears to be a major
problem, one unlike I have ever seen before.

My PCI device has three BARS. This can be confirmed by the Technical
documentation and the x86 code. When the pci device is first probed, I
run a loop to printk out the bar information, this is just as a sanity
check. Here is the output on the x86:

Bar0:PHYS=e0000000 LEN=04000000
Bar1:PHYS=efa00000 LEN=00200000
Bar2:PHYS=e8000000 LEN=04000000

but here is the output on the mips:
Bar0:PHYS=20000000 LEN=04000000
Bar1:PHYS=24000000 LEN=00200000
Bar2:PHYS=00000000 LEN=00000000

notice, BAR2 has no valid information on the mips. I tried to run
"pci_enable_device" before printing this information, as suggested by
LDD but it did not help.

Has anyone seen a problem like this before and any idea how I can get
BAR2 a proper address?

If I examine the config space directly there is an address in BAR2's
register, however it isn't in the 0x20000000 range like the other two,
instead it is 0x1c000000. Also if I do a ``cat /proc/iomem'' I correctly
see BAR0 and BAR1 in the output, but not BAR2.

Thanks for any help,
Jon